Youtube daily report Feb 10 2018

Hi, Did you know that in the movie IT! there should be other scenes that were cut out?

No? "Then continue on with the video and get ready for a whole new look at this movie."

The first scene is probably a joke and should never be in the movie.

Georgie takes his boat and leaves the clown down there in shitty water.

And there is Bill's family dinner, but without Georgie.

Another cut out scene is continuation to the scene in movie:

Bill's first encounter with Pennywise (You float too!)

What to say to Henry is just get Fucked up.

In the past scene, Henry killed his buddies, and now Sten is afraid to go in.

The Losers find Georgie's walkie

When Eddie fell to the lower floor of the house where they were looking for Pennywise,

he broke his hand, and this is his rescue.

When Sten had a speech at the end of his Mitzvah bar, He got angry

This clip is not almost different from the movie, but when we look at the customer

We can see a director of the movie.

The last scene was supposed to be at the end. it is possible to see Bill's family moving from Derry.

If you liked this video click the like button,

and write in the comments what scene would you like to see in the movie

or which you would not want there.

In the last seconds of the video, we'll show filming of IT!

For more infomation >> Georgie is alive ? | Top 10 deleted scenes from IT! | [+18] [60FPS] - Duration: 6:01.

-------------------------------------------

INDIA or PAKISTAN - Which Military is Better? - Duration: 5:21.

In

This episode of FTD facts. I'm comparing the military power of the sister nations of India and Pakistan

So let's start this how's it going guys? I'm Leroy Kenton, and thank you guys so much for joining me before you continue

Don't forget to give this video a big thumbs up and for you all you

Newcomers here to FTD facts hit that subscribe button and that down notification

We post videos daily here

So if you love learning about the different countries and cultures all around the world

FTD facts is the place to learn so first off

Let's begin at looking at the military of India India seems to be

modernizing its military and its nuclear capabilities while keeping an eye on

China another world superpower now India currently ranks fourth in terms of global military power and

India has been quickly developing new military technologies taking a look at the specific military

statistics the available manpower for India is

616 million active personnel sits at 1 million three hundred sixty two

Thousand five hundred and they have two million eight hundred and forty four thousand seven hundred fifty reserve personnel

Now it turns of Pakistan's military the Pakistani Armed Forces are ranked 13 in the entire world

But there are the six largest in terms of active military personnel

And the largest among all the Muslim nations and also to note Pakistan has the world's sixth largest nuclear

Arsenal in terms of Pakistan's military breakdown it looks like this Pakistan has available manpower of 95 million people

their active personnel is at

637 thousand and they have two hundred eighty two thousand reserve personnel

Now in comparing the army strength of India and Pakistan India's Army has four thousand four hundred and twenty-six combat tanks

They have six thousand seven hundred and four armored fighting vehicles

292 rocker projectors seven thousand four hundred and fourteen towed artillery as well as

290 self-propelled artillery

now for Pakistan's army strength

They have two thousand nine hundred twenty four combat tanks two thousand eight hundred and twenty eight

Armored fighting vehicles the rocket projectors in their possession total at one hundred and thirty-four they also have three

Thousand two hundred seventy eight towed artillery

And they're self propelled artillery total is at four hundred see five now moving on from the land up into the air

Let's compare their air power

India has six hundred and seventy six fighter aircrafts and eight hundred and nine attack aircrafts their transport aircrafts total at

857 their trainer aircrafts are read

323 and they have a total of six hundred and sixty six helicopters oh

That's probably bad luck and also India has sixteen attack helicopters now when you look at Pakistan's air power

We see that they have 301 fighter aircrafts

394 attack aircrafts

261 transport aircrafts, and they have 190 trainer aircrafts now. They're total helicopters are at

316 and they have 394 attack helicopters continuing now with the navy of these two amazing countries

India's total naval assets it at

295 in their Navy they have three aircraft carriers fourteen forgets 11 destroyers 15 submarines and

23 Corvettes and their mine warfare vessels total at six in Pakistan's Navy

They have a hundred and ninety seven total naval assets

They have 17 patrol craft ten. Frigates eight submarines and three mine warfare vessels now finally

Let's end off this video in looking at their total military

Defense budget India's defense budget is an estimated total of 51 billion dollars u.s.

India's defence budget is a fourth largest in the world and will be

12.1 percent of its annual spending in the year 2018 to 2019 and even though India's defense budget has

Really increased a huge chunk of it is going to be eaten up by its

Personnel costs so this may hold back some of India's Armed Forces

Plans especially when it comes to requiring new weapons now Pakistan's defense budget is a lot smaller at seven billion dollars u.s.

But reported that Pakistan will be increasing its defense budget by around seven percent

Now the past couple years Pakistan's economy has grown quite a bit especially in the year 2016 it grew by

4.7

percent and with this Pakistan's military can focus on a lot of bigger priorities like new combat aircraft

Submarines as well as its country's missile programs

So that's all I have for this military comparison episode of India and Pakistan

Thank you guys so much for watching and be sure to check out our full video where we compare India and Pakistan as nations on

a whole and we do a side-by-side comparison

Of them that video is gonna be at the end of this episode or you can check it out in the cards in this video

So guys, I want to hear your thoughts and comments down below

As well as follow me on social media those links are below in the video description as well until next time guys stay

Awesome, and I'll see you real soon

Hey guys, and if you want to continue learning more about these two amazing nations of India and Pakistan

Here's that video that I highly recommend

You can also check out our other witches better episodes where you can learn a lot more about the different countries and cultures all around

The world and see how they match up together side-by-side

For more infomation >> INDIA or PAKISTAN - Which Military is Better? - Duration: 5:21.

-------------------------------------------

【MUKBANG】 Making Japchae Using Korean Vermicelli Dang Myun!! 12 Servings [5Kg] 6100kcal [Click CC] - Duration: 7:40.

Hello its Kinoshita Yuka ( English subtitles by ~Aphexx~ )

so today! tadaa I've received these 'Danmeon' clear noodles From a Korean viewer and I'll make some ?chapsuu? out of them

This is a Korean sesame oil which I'll be using to make this dish

I've eaten this this before but never made it myself I can't wait to get started

I also have a recipe for this TYVM as always

Alrighty let's get to making it

These are the ingredients

These are the clear noodles from Korea

This recipe will serve 12

Reconstitute in lukewarm water For 30 minutes to an hour

While that is going on Marinate the meat

Soy sauce, sugar

Pepper

Ginger Let that marinate

Chop up and boil the spinach and shirataki shrooms

Flavor with salt and sesame oil

This is a sesame oil that was sent to me

Is it just me or does this sesame oil Have a stronger aroma

Looks yummy as is

Chop the carrot into strips

Chop the onion and peppers as well

Add sesame oil to a pan Then add the onions and pepper

Sesame oil So good

And cook the carrot

Such tropical colors

Then add the marinating meat

Then boil the noodles that we let sit in water

Wash in cold water to get rid of the sliminess Then add soy sauce

Sugar

Salt, sesame oil, pepper And mix

Combined with the meat and veggies

Mushroom and spinach

tadaa it's done

It's so colorful and looks so yummy

With the dish it's 4.1kg

Along with 5 cups of rice and One kilogram of miso soup

itadakimasu They stretch like rubber bands

It's so very chewy With that sesame oil and pepper flavor its so yummy

The sauce is super delish

soy sauce flavored with a hint of sweetness And a hint of ginger

hot

The rice is so fresh and hot that the bowl is so hot to the touch

Goes great with a rice

That was dangerous for my hands though

meat so yummy

As for veggies we've got onion, spinach, carrot, pepper and shrooms

Packed with all sorts of things And filled with different types of mouthfeel

Since we left the spinach and mushrooms Marinade its got a nice sesame oil flavor

this bowl be hot

will it never cool down?

Look at how much steam comes off it

I don't have these shiratake mushrooms that often

yummy its chew~nky... I dunno quite how to explain

but I totally love the mouthfeel

These noodles sort of resemble our 'harusame' noodles in that they are so chewy and stretchy

Big Slice of meat ~ uncut ~

It's alright though since I love me so much

They're even yummier when they Sit in the sauce for a while

This part of the bowl is so fraggin hot

Despite being that far away from the bowl It still retains its heat

yummy but so tough to eat

I'm now able to hold it ~ still hot tho ~

( your translator ~Aphexx~ is using dictation software to make these subs..... mistakes happen.... they're going to happen a lot.... be chill my dudes )

This is how I cool it off

I must take my time to chew And allow things to cool off as well

Final mouthful itadakimasu

All done gochisosamadeshita

the ?chapgaei? noodles were so slick and yummy

It was flavored with soy sauce sugar and sesame oil A flavor combination that I totally love

It was also nice to get so much of my daily veg in

and since the sesame oil was direct from Korea I feel as though it was a bit more legit and authentic flavor

Paired nicely with rice It was so yummy won't you all please give it a try

And as always thank you for watching if there is anything Do you want me to do or eat please tell me in the comment Section below and if you like this video please hit The like And subscribe buttons BAI BAI

For more infomation >> 【MUKBANG】 Making Japchae Using Korean Vermicelli Dang Myun!! 12 Servings [5Kg] 6100kcal [Click CC] - Duration: 7:40.

-------------------------------------------

LUSTRO 200W Mod l by Asmodus l + РОЗЫГРЫШ l ENG SUBS l Alex VapersMD review 🚭🔞 - Duration: 18:17.

Usually reviewers make close up video before they making face video. My close up video is done at the moment and i want to tell you - to understand and show this chip i spend more time, than i spend on DNA chip

Asmodus try hard to make this chip

I'm almost done but i want to wish Lex good luck and patience(because he's gonna need it while making subtitles for this video)

Okay folks, without further delays let's roll. Intro...

Hopochki HEY

Hello everyone! Alex from VapersMD is here

And i'm glad to welcome you on my channel

Today our guest is Lustro 200w by Asmodus

LampO, KrevetkO

Yes Misha, LustrO

This regulated box mod is made by Asmodus who's made many great box mods in past that is liked by many vapers

Parilshikam(same vapers but with different context - don't ask), ex-smokers, people who uses personal vape devices, Personal Electronic Nicotine Delivery Systems users

Okay, let's stop laugh at definitions of this word and let's talk about this device - the chip in here is very interesting, there is also touch-screen

And a lot of other features that this chip can provide which i will demonstrate to you in close up

Also this box mod supports firmware upgrade and powered by 2*18650 and it have LED backlight and it have F%#&&G flashlight

Close up is gonna be interesting

Let's roll

Okay folks, it's time to unbox this Lustro

Here we have transparent package, on the sides we have name, logos, it also says 21+, scratch-code

On the rear we have description of a features and specs, link to the official site, warnings, kit content and BIG logo of Asmodus

Under the cover we have box mod itself

And under the foam we have User Manual, Warranty Card and Battery Safety guide

By the way under the battery door, inside the 18650 slots we have USB - Type C cable which is required for charging and firmware upgrade

Now let's talk about specs of this device

This mod is made of zinc alloy and available in 2 color options - painting and soft-touch covering with different color palettes

Mod is driven by the Asmodus' chip GX200HUTC which gives 200W of power and supports all the modes that is actual to this date

The lower ohm limit is at 0.08ohm, though manufacturer claims it's 0.1ohm

Besides all the features i will show you later on this mod also have infrared sensor for gesture control. Also it have flashlight and LED backlight

This mod is powered by 2*18650 and can be charged via Type C with 0.5A current

It's time for detailed overview and as always we start from the top and in order

At the top we have metal connector with metal spring-loaded pin

I think you noticed that one edge is not like all others but that's due to LED backlight

If we look closer on the connector we will see that it's a bit protruding. That's made to prevent top part being damaged or scratching

This is control panel. It have Fire button with LED backlight, touch screen and Type C slot

Also we have white stripe - it have LED inside

This side is empty - we can only see part of battery door

Here we have actual battery door with vent holes in it and it also have Asmodus logo

This side is identical to other side

At the bottom we have 2 LED lights flashlight, vent holes and certificates

Now it's time to talk about battery door. Pay attention - there is 2 big gaps - at the top and at the bottom, that's sad.

Battery door sits tight and have no play which is good.

That battery door is hold by 4 magnets - 2 at the cover and 2 at the main body

Inside we see a slots for 2*18650 batteries with stickers which shows the correct way to install them

They have a notice that we need to Push up a bit to insert the batteries because contacts is spring-loaded on both sides

Also they show the correct polarity

In here we have warranty seal

And we have a ribbon for convenient extraction of the batteries

Let's install the batteries, first goes negative DOWN

Second goes negative UP.

Push a little and we're done with installation

After this done click the battery door in place and this mod is ready to work. And we're ready to continue

To turn On this mod you need to hit Fire button 5 times

Raz, dva, tri, chetire, pyat'(1-2-3-4-5)

And instantly we have important notice appeared on the screen

It asking if our batteries is "married" - this side we have Yes, this side No

Sadly you won't be able to see it because of camera

If you press No the mod will turn off and won't turn on again no matter how many times you hit Fire button

That's why we need to re-install the batteries

One two three four five

Tap yes and the mod is loading

On the screen we have following information - mode, voltage, resistance, you can say speedometer, adjustable wattage, battery life, Preheat option

Indication of Infrared sensor(is it on or off) and lock indication which shows is your mod locked or unlocked

First thing we can do is to unlock the screen - it can be unlocked in two ways - either swipe down or tap on the screen three times(but this option is within the menu)

After you unlock you see the open lock on the screen

Of course we can swipe between mods like so - here we have TC

Here's the Curve mode - in here you can adjust you wattage/time curve

TCR mode and TFR mode

And Power mode

Here we have a speedometer - if we click on it on the bottom it will change value 10W - now it showing us either time of the draw or your current wattage

You can also adjust your wattage - click on the wattage and you will get the menu like this - it have + and - buttons

You can adjust the wattage with 0.1 increments. If you tap and hold adjustment will switch to turbo mode

To apply just hit Fire Button

Next thing we can do - adjust the Preheat.

At the moment its set on Hard and if we swipe up we can choose Slow

Or Normal

Or get back to Hard

In TC mode we can adjust the information that speedometer displays

Also we can change between wattage and temp limit

If we just tap it will change and if we tap and hold it will give us option to adjust the value

If we tap and hold on the name of the mode, in this case TC - it will give us to select the wire we're using

Next mode - Curve. If we tap and hold on those zeros we are get into adjustment menu

On the left we adjust wattage, on the right side we can adjust time

If we swipe up with unlocked screen we can change Presets between P1, P2, P3, P4

Next is TCR mode. This mode is for fine tuning of TC.

Again this is switching between temp limit and wattage

If we tap and hold on TCR it will allow us to adjust it

Also we have Memory - M1, M2, M3 and so on

Next mode is TFR - it adjusts almost as TCR

At the moment we have the screen locked and this isn't all the features with locked screen i can show

If we swipe down we will unlock it, but if we swipe up it will lead us to menu, where we can turn On and Off infrared scanner and Flashlight

Upper button is for Infrared scanner. Right now it's off. Let's turn it On and i will demonstrate how it works

To make it work we need to unlock the screen and now you can just swipe between the modes

In both directions

Also you can select your Presets by swiping Up and Down accordingly

Next is the Flashlight. Tap on that button and we get the picture of the flashlight on the screen

Now we can adjust the Flashlight which is on the bottom. Tap once and it will turn On 1st LED, tap second time and the 2nd LED will light up.

I can't say it's very bright, but it gives enough light.

And like so we turn it Off

If your Flashlight is On and you press the Fire button it will automatically turn Off and you will get to the main screen

Folks, I have not finished yet

We have another Menu and we can get there by pressing Fire button 5 times

1-2-3-4-5

Here's the Menu button.

You can turn Off the device

Swipe to the left lead us to next tab which is Day Puff limit.

I have to turn off the lights because otherwise you won't be able to see s$&t.

Next tab will reset your Puff counter

In here you can select the design of the speedometer - Real or Fun. I didn't get the difference. Whatever.

Next - Firmware upgrade. When you tap it will ask if you want to upgrade. Tap Yes and i will show you what's gonna happen next but a bit later

Next is Firmware Info and chip version info.

Next tab is LED backlight adjustment. It allow you to adjust the speed of it. There is several modes - Fast, Slow, Medium

Next tab is for turning this LED On and Off. And the fact that you can turn it Off is good.

In here you can select LED color from Red, Blue, Green. But we will stay on Red.

Next tab is Lock - in here you can adjust how you will lock and unlock this device. You can do it by the Slide or Click. To unlock it with Click you have to click 3 times. Let's set Click.

Next tab is for Screen Active time. Right now it's set on 10 seconds, you can lower it down to 3 seconds or raise it up to 60 seconds

Next tab is for resistance lock. You can do it manually, though this mod do it automatically. But you can adjust it to certain value if you know your resistance for sure.

And we got back to Power On/Off tab

Aside from that if you click on Fire button 3 times

1-2-3

Then we will do System Lock - in this mode whatever you click or press - the mod will not react.

Raz dva tri

Unlocked. Now it's functional.

Regarding screen lock - we set the Click-type. For example if we tap the screen says Click screen 3x to unlock.

One, two, three. Raz, dva, tri. 1-2-3. Four, five.

One, two, threeee~

VOT

Unlocked. That's why i like Slide method more.

Let's get back to Power Mode and let's see how's this LED works

To make it happen we need to screw down atomizer and we're ready to test

When i press Fire button sort of wave or level, i don't know how to call it, going on

Fire button have LED backlight as well

As i said we can select different colors - Blue, Green and Red or turn it off completely.

V celom(C pronounced as TS)

Okay friends, this is all regarding features of this mod

Let's see how this box mod fit bigger atomizers

For example - Gorgon RDCA which is 26mm in diameter fits great with no overhangs, though it's maximum what this mod can fit.

Size-wise Lustro is looks like so when compared to other box mods that is also powered by 2*18650

As you can see it's average

Another important information - once you plugged the cable to charge your mod it will not fire. There is no pass-through option in here

One great thing about Type C - no matter how you plug the cable - the charge will go anyway

That was all i could tell you about features, now it's time to show you how Firmware upgrade works

To do so we need to go to my PC. Let's roll.

First thing we should do - go to the Asmodus official site - asmodus.com

Next - Support, Downloads

Scroll down and find Lustro

It's already 2 versions of firmware - 2.2 and 2.3. I recommend to install 2.2 and then 2.3

But first we need to download Updater Program

Click and download. And then download both firmwares

As you can see i already done that step so let's go to the firmware upgrade

Updater Program is lay in archive so you need to unpack only this file

Next click on it and the Updater will open

Now we need to plug in the mod to the PC. To do so let's go to the menu and select Firmware Upgrade

Box mod will ask if you want to Upgrade. Once you press Yes you need to hold Fire Button. Now we have a Download Mode line

Now you can plug in the Type C and press Connect button in the Updater Program. This button change the color to green - it means everything goes correctly

Next click File and select version 2.2. I already did that so i install 2.3

After this done click Upgrade and wait till it's done

Upgrade complete - self-explanatory

Box mod automatically disconnects and reboot

Remove the cable and turn the box mod On

Click Yes on Married batteries and now our box mod has firmware upgraded

Okay friends, that's all i could tell you in this close up

Let's go back to the face-time and speak of its pros and cons

Thanks for your attention in this close up and on my PC desktop

Let's roll

On top i have atomizer by Asmodus named...

.............................................................oO

I forgot the name. ZESTHIA

We're not gonna speak about this RTA, we are gonna speak about this box mod and as always we start with cons

First con goes from my inner perfectionist - pay attention - all control elements is not centered due to the angle with LED stripe is shifted

Because of that all control elements went offcenter to the right

My inner perfectionist is pissed off. I look at this mod and i see asymmetry. For example - atomizers sits in center and Fire button is positioned to the right or left - whatever you like

Me personal con for asymmetry

Next con goes for laggy touch screen. I think you noticed it - sometimes it works not as it should. Especially it's noticeable when you try to unlock the screen with 3x clicks

My point is - the control icons is very small and sometimes it's hard to get on them with your big fingers. Maybe that's why it lag

It's possible that it works fine - but not with ordinary human fingers

And last con i'll give for those gaps between main body and battery door

Yes, even though the battery door sits good there is gaps and it's a con

Nitpicking

I have only one nitpick - this box mod is overfilled with features.

Yes, it's cool, but on the other hand this whole functional is in box mod itself. Someone would say it's great and convenient that you don't have to plug it to PC and connect with software

BUT. You won't be using 80% of this features on daily basis and i guess it's more convenient to make all adjustments once in software and just use it with the features you actually need

That's why it's very easy to get lost in menu of this box mod. You can swipe in all directions, do random taps. Too many things and huge menu can get you confused

Some of beginners may even get scared by this huge functional. That's why i think that some features should be in software

Let's talk pros now

First pro i'll give for the chip with many features. The chip is great, i like how it works in Power Mode

There is almost no delay on Fire button.

Besides this mod have huge functional with many features some of them you may not even need

One of those unnecessary features is Flashlight. C'mon guys, everyone have cell phone. Every cell phone have Flashlight. Flashlight feature in here is unnecessary

But there is some really cool features like firmware upgrade and option to turn the LED Off. It's very bright.

Next pro i'll give for fitting large diameter atomizers - up to 26mm. And it's good.

Another pro goes for soft-touch coating. When you hold this mod it feels like something rubberized. Some of you might like it, some of you will not, but it's convenient and comfortable. That's why i give a pro for coating.

Another pro i'll give for solid battery door. It have no play and sits firmly. Good battery door - major pro

And last pro i'll give to this box mod for how its built. It feels like a monolith piece with no rattle etc. I will give props for that - it will make using of this mod more comfortable

The price on the official site is 79.95$

If you will look at all features - this is good price for this mod.

If you are geek and you want the box mod that can do everything and have a Flashlight - i think it's worth the money. And it's have pretty compact size as well.

Of course you can leave a comment with your opinion regarding the price - it will be interesting to read

Overall folks

I want to say big thanks to Asmodus for sending me this device for this review

I wanna thank YOU for your attention

Don't forget - in this corner we have a voting going - do you like this device or not(да-yes/нет-no)

And now it's time to remind you to subscribe to this channel, push that bell to get notified when video is up and leave a comment if like this review/subtitles or not while Alex will announce the giveaway which is for CIS only

That's it folks.

Don't forget to hit that Like button if you like my reviews and subscribe to my channel.

Also share this and other videos with your friends. Spread the word

Alex from VapersMD was with you

I wish you a delicious vape and let the vaping come into your life and stays there for long

We'll see you soon

Take care of yourself and your mods

Poka poka

For more infomation >> LUSTRO 200W Mod l by Asmodus l + РОЗЫГРЫШ l ENG SUBS l Alex VapersMD review 🚭🔞 - Duration: 18:17.

-------------------------------------------

Я Люблю Тебя Пранк / I Love You Prank - Russia | Boris Pranks - Duration: 5:57.

I'am sorry...

I love you

Slow down, bro

I'am sorry...

I Love you!

you don't say!

I love you

What?

What?!

For more infomation >> Я Люблю Тебя Пранк / I Love You Prank - Russia | Boris Pranks - Duration: 5:57.

-------------------------------------------

How to download real vidmate - best Android downloader app 2018 in Urdu by technical kpk - Duration: 4:03.

wellcome to my channel

technical kpk

like video

share video

comments video

subscribe channel

press the bell icon

real vidmate here

link in the description

For more infomation >> How to download real vidmate - best Android downloader app 2018 in Urdu by technical kpk - Duration: 4:03.

-------------------------------------------

Surprising Scene of My Cats! - Duration: 4:03.

Stretching-

It's annoying to go down.

May I go down?

Nope.

Uh?

Hey? No..?

Wow!

Go to mom to wake up her for treat.

Goboogi on the top, Chobee under the top.

Uh?

Chobee's hair.

Pizza tube Chobee liked when he's a kitten.

Hey?

Why do you dig there?

No way...

Ah...

Ah.........

Ah..............

Ah...

Ah...........

Get out from the crime place.

Come to the crime place again.

Second crime... Pee....

Hah

When I come back home.

For more infomation >> Surprising Scene of My Cats! - Duration: 4:03.

-------------------------------------------

МАЙНКРАФТ ВРЕДИНА ! КТО ЭТО? МАЙНКРАФТ ОТКРЫТИЯ МОБЫ - Duration: 5:46.

For more infomation >> МАЙНКРАФТ ВРЕДИНА ! КТО ЭТО? МАЙНКРАФТ ОТКРЫТИЯ МОБЫ - Duration: 5:46.

-------------------------------------------

Amsterdam - The Airbnb city - (VPRO documentary - 2016) - Duration: 46:41.

For more infomation >> Amsterdam - The Airbnb city - (VPRO documentary - 2016) - Duration: 46:41.

-------------------------------------------

Italian Words | False Friends - Duration: 6:56.

ciao a tutti ragazzi, benvenuti sul mio canale se siete nuovi, e se non lo siete, come va?

io sono FilcoFilms, e oggi faremo un'altra video lezione dall'italiano all'inglese

quindi questo video sarà in italiano, e per quelli che vogliono seguire in inglese, spingete il bottone CC qui sotto

e ci saranno le traduzioni

questo video vi aiuterà se parlate inglese e state imparando l'italiano

ma anche se siete italiani e state imparando l'inglese

quindi rimanete a guardare perchè alcune di queste parole vi salveranno il culo prima o poi

what we'll be talking about today is something commonly known as "false friends"

it's something I noticed first when studying Spanish

I noticed it because there were words that were the same or similar to some Italian words

but they had nothing to do with each other

and so I realized these words exist between Italian and English too

but obviously speaking both languages fluently I never really noticed it

either because I already knew they had two different meanings, or because I wrongly used them interchangeably

in the sense that I'd use them assuming they meant the same thing in both languages, but I'd be wrong

so don't worry too much, these mistakes are common and they happen to everyone

the first "false friends" we'll be looking at

is the Italian word "alunni" and the english word "alumni"

which have a similar meaning, but aren't at all the same

and that's because in Italian, "alunni" means students attending a school or a university

while in English the word "alumni" specifically refers to ex-students

I wouldn't be "alumni" until I've finished studying in a certain place

so this is a little difference if you want to learn to use this word in English

I'm an "alunno" of that school

io faccio parte degli "alumni" di quella scuola

the second example I always get wrong is the word "eventualmente" and the word "eventually"

in English, the word "eventually" means that in the end...

whatever is being described will happen in the end

but in Italian, the word "eventualmente" is a synonym of "caso mai"

or "semmai"

which in English would be better translated as "possibly" or "potentially"

mi ripagherà i soldi "eventually"

how much would it have cost him "eventualmente"?

the third word, which you all definitely know

is the word "pepperoni/peperoni"

the only difference between the English word "pepperoni" and the Italian word "peperoni"

is just the extra "p"

but even though the words are virtually the same

the two meanings have nothing in common other than the fact that they are both edible

the Italian "peperone" is a "pepper" in English

but "pepperoni" are spicy salami in Italian

so don't make that mistake

it happens pretty often that English and American tourists come to Italy asking for a "pepperoni pizza"

and they don't get what they expect

mi mettete i "pepperoni" sulla pizza?

can you get mi a "peperoni" pizza?

the fourth set of words is "actually" and "attualmente"

two completely different things

"attualmente" is something happening this very moment

it's something happening now

while in English, "actually" means "in reality"

so "attualmente" in English would be translated as "currently"

and "actually" is translated with the words "in reality"

"actually" non ho finito ancora

"attualmente" I'm finishing off a project

the next two are actually Italian and British English

because this English word has a different meaning

even when it's used in British English versus American English

so the words I'm referring to are "pavimento" versus the word "pavement"

in In italian, obviously "pavimento" is the ground

but it's usually used to specify an indoor flooring

while in British English, the word "pavement"

is literally the sidewalk, and only used to refer to a sidewalk

wooden "pavimenti" are nice

quando passeggi per la strada, assicurati di rimanere sul "pavement"

in sixth place is the word "factory" versus the word "fattoria"

in English a "factory" is actually the "fabbrica"

which is obviously an industrial place where things are made and assembled

while "fattoria" is actually translated to "farm" in English

which is where animals are kept and farmers work

so once again, the two words are completely different in meaning

questo prodotto è difettoso, dobbiamo vedere che succede alla "factory"

let's go to the "fattoria" to see the cows

the next one isn't one I think most people struggle understanding or distinguishing

but seeing both words written I feel like they could look very similar

the English word is "magazine" and the Italian word is "magazzino"

similar right? But also completely different

"magazine" in Italian actually translates to "rivista"

while the "magazzino" in English would be a "warehouse"

ho visto quella maglietta che hai in un "magazine" l'altro giorno

can you please check if you have an M for me in the "magazzino"?

the next one is one that makes me laugh actually, because my dad often mistakenly uses it

he uses this phrase the same way he would in Italian

and I understand the root of the mistake

the words are "in fact" in English, and "in fatti" in Italian

"in fatti" and "in fact" actually mean the same thing if you directly translate them

but in conversation they are used in two different ways

in English, the words "in fact" would be better translated as "di fatti"

if you're using it in the same context

while the Italian "in fatti" would be more accurately translated as "exactly" in English

because in Italian we use "in fatti" as more of an affermation

or even "therefore" in some cases

non ho guidato, "in fact" non ho neanche una macchina

my mom has a stick shift car, "in fatti" I can't drive it

and the last set of words for this video is the English "diverse" versus the Italian "diverso"

the meaning is actually similar here

it's very similar, but they can't really be used interchangeably

in Italian "diverso" is more likely to just mean "different" in English

but the English word "diverse" is more equal to the word "diversità" in Italian

this one's really hard to explain, in some situations I think they have similar meanings

because you can say "we all have diverse views"

which means "noi abbiamo tutti idee diverse"

or "opinioni diverse"

but in English, "diverse" can be used when describing a population

especially when there are a lot of nationalities and races that live together in one place

you can say the environment is "diverse"

I'm actually not too sure how to explain this one, but there is a slight difference

and it's important to recognize it because the two words aren't exactly interchangeable

anyway, that's it for this video, I hope you learned something

and even though there aren't that many of these "false friends" they trick me sometimes as well

so it's important to know about them

I hope you liked this video, and I'll see you next week with another

probabilmente in inglese perchè gli ultimi due li ho fatti in italiano

io sono filcofilms, spero vi sia piaciuto questo video, lasciatemi un "like"

e un commento se avete qualcosa da dire

li leggo tutti

and I'll see you next time, bye guys!

For more infomation >> Italian Words | False Friends - Duration: 6:56.

-------------------------------------------

Interactive Heffy Doodle Good Luck or St Patricks Day Cardmaking Tutorial - Duration: 22:04.

hi welcome to Hedgehog Hollow I'm so excited to be here finally doing some

front on videos in my new room we're still working on the backdrops you'll

see some changes come along in future videos but today I'm here as part of

heavy dual or release number three for a wonderful blog cut with some mazing

crafty girls I'm using the new lucky friends there which is a good lucks and

patrick's day kind of set and we're going to be making an interactive card

of a leprechaun that jumps along our rainbow is so cute and it's really

simple to do I'm excited to show you how to make your own interactive card so

let's get started

so today I'm using the lucky friend stamp set from the new Heaphy doodle

release once its release is also going to be some coordinating dies that we've

got a preview of at creative ation and this guy here when you cut him out his

hands can hold this horseshoe the gold the beer the coins all these really cool

things in there so check those dyes out as well I'll make sure I link those in

the description for you too there are also some great words that go with this

release Leslie gave me this a creative Asian because the shipping time to the

US and I was super excited to use it so check out the rest of the release it's

really cute and Easter sets in there there's some lovely mice that I'm

looking forward to getting and some great new dyes as well including some

interactive dyes and also some words are in there too that are all hand lettered

by Leslie so the first thing I'm going to do is I'm going to be coloring in my

pieces now I cut these out using my scan and cut because I didn't have the dyes

for those but as I say you really do want to try and get the dyes because

this is really cute and I'm looking forward to mine

arriving coloring wise today I'm using my new bow markers and I have these in

this wonderful Nouveau piece it has a little feet on the bottom there and

these Nuvo pen are great value they're alcohol-based markers and you can buy

them in color sets you get three greens through yellows through oranges however

you want to buy I have them all here I have lost one of my yellow so I'm going

to have to replace that one but they're great you get blended in there there's

blacks there's metallics and this is just some temporary taupe this is tombow

removable adhesive whenever I'm coloring something that I've pre-cut out I just

put some of that adhesive on the back there try a little bit more there and

you always want to color with alcohol markers on a porous background so this

is just a piece of white printer paper so I'm going to stick these onto and

this just means that they won't move around while I'm coloring them so that

makes that so much easier I'm gonna start off by using my greens so here you

have this is the woodland greens I stick some labels on the side just because I

do videos and things and I want to always remember what they're called so

these are my three green shades so I have a four one three or four one five

and a four one seven here and so I have a light to dark and I'm going to just

work through like with any alcohol markers I'm also going

to be using my supreme metallics this is the gold which will go onto his hat I've

got a couple of yellows as I say I have lost one of my yellows here but I'll be

using the sunshine yellows I've got my blenders and then there's also a really

nice fair skin tones which are going to be perfect for his legs and his face and

things in there so I'm going to get coloring I'll play some nice music now

and you can see how he comes together

so the next thing we want to do is build our rainbow and I've already pre-cut

from the lawn fawn rainbow cardstock see my favorite things end of the rainbow

that I had in my stash and this is a great ring with those some other

rainbows out there that I really like there's a lawn fawn one I do have

another my favorite things one but this one was perfect so this is what I had in

my stash so I'm going to be using this one so the first thing we're going to do

is peel off the backing layer of this double-sided adhesive so peel that one

off and then that allows us to start assembling our rainbow and we can then

work out where we want to put it this stuff is super super sticky so I don't

know about you but I always say it the song in my mind so we've got the red

we'll go first so I'm just going to pop the red down on here and then I'll have

the yellow or meet up with it

I'll have our yellow make sure that meets up nicely I didn't do any paint

because you only get six slots so I'm going to move straight on to my green

and then purple

and then orange

and now the balloon now I've arranged these so that I'm going to give them a

straight end when you look at this they actually come to a V but this is going

to work better for the card design that we're using so I have my tonic scissors

these are the Tim Holtz's they're a nonstick scissors so they work really

nicely if you're using things like double-sided adhesive and I'm going to

just trim these straight across because that's how it's going to work for our

pot of gold and then I'm just going around here now the other thing I'm

going to do so I have a little some pieces left here so I'm going to snip

one at this end and you'll see how it just scissors come clean off which is

exactly what we want so these two pieces are not going to go to waste

I'm going to now just lay another one on here and make sure that they all meet up

and I'm going to use the same on this one here but I'm also before I cut it

down I'm just going to turn it over so I can make sure they all go together

nicely so it will be a little bit forgiving this Elizabeth craft adhesive

is super strong but it does give you a little bit of wiggle room so if you

don't press it down it won't stick fully until you're ready so as I lay those in

I'll press it in and there we have our rainbow so I'm gonna put that to the

side well we now assemble that interactive element so now we're ready

to do our assembly we have our finished rainbow here I just trimmed that addi

civ so that it's all nicely together on the back there we also have our little

pot of gold here I've pre-cut my pieces from some lawn fawn dyes these are

called outside in stitch scarlet rectangle stackables and they will be in

the description below for you as well I cut one in the white which is going to

be my inside and then I cut one in the same as she does different green it's

called noble fir but it's a really nice and Patrick screen which is going to go

on the outside there as well so to do this next step I have my pot of gold

I've actually put a little slit in there so

you can see there there's a slip and for that the slit is there so that we can

put our rainbow inside and I have a piece of foam on there to give me the

depth of where it's going to be and I'm now are going to align this at the same

time I have my slide on over he's from non-phone which is going to be

our interactive element now there's going to be slide on over semi circles

and if you're part of the Hedgehog Hollow subscription box these the new

ones are going to be in there these are the older ones they're slightly

different so my pot of gold is going to go somewhere in the middle bottom down

here and then I'll slide on over circle is going to go next to it like this so

the first thing I'm going to do is grab some of my Tamiya tape this is my

favorite tape for die-cutting it's a really nice low tuck tape so I'm going

to put that in place first and then the next thing I'm going to work out is I'm

going to grab this back again which is my piece here and I'm going to just trim

those little metal pieces off of there these are my favorite little wire

cutters I'm just doing this over the bins so that they go straight and you

can also take some sanding paper and cut those off but I find that just those

tall nodules are fine on that now the next thing you're going to do is you're

going to position your rainbow where you want it to be and then you're going to

put this back over the top and what you'll do is you'll feel it clicks into

place so I'm just moving mine over so I can feel that that's not really moving

it's clicked into the same place I'm going to work out when my rainbow wants

to be round about here and this is where you could almost do with a couple of

hands I'm going to grab some tape so it's ready to go to get on my hand there

just feel that click back in there we go a rainbow in place

and then I'm going to stick this on here and I'm going to run these through my

Gemini machine so I'm going to run the rainbow through on here and I'm going to

run my slide on over here that means my rainbow is going to match up perfectly

here and my slide on over circles going to be there for our interactive element

so if you haven't seen me use my Gemini machine before I have the Gemini junior

and it stays on my desk I absolutely love it so I'm going to turn this over

your sandwich is actually upside down with the Gemini so it's Di's facing up

and I'm going to make sure they don't overlap which is possible and then what

happens when you get this into the Gemini you're here I'm not pressing any

buttons I've got one hand here and the other hands over here it hooks it in so

it's pulling that through now and once it comes out the other side we're all

done so it puts a nice amount of pressure on there so even with all that

thickness and the adhesive paper on there it's cut through so easily which

is amazing and I'm going to just gently pull this up peel that tape off on the

other side so I've got that scholar to edge which is going to match up

perfectly on my frame and those stitches and then on this one here we have that

interactive element on that so let's now start assembling the pop

all these pieces out the way this is just my little cutting board that I use

to cut my slit in but I'm going to leave it here for now so the next thing we

want to do is put this the other way up like this we're going to put some foam

on the back of this piece here and to do that I'm going to first of all peel off

the Elizabeth craft adhesive

try and catch an edge there we go this so we're going to slop this through that

little hole and before I press anything down I'm going to line it up with this

corner let's press it down I'm going to take that foam off the back of my thing

it's just my scotch 3m tape there and the reason I popped this up is just cuz

otherwise it's a little bit bulky and you don't get the best of dzn so I'm

going to do that and I'm gonna stick my pot of gold down so our leprechaun is

going to ride down our rainbow like this that's how he's going to go so now we're

next we're ready to build our slider pieces now I just grabbed some coins out

my drawer I have a British 20 pence piece that happened to be sitting in the

drawer an American penny works you can use a dime you can use five cents I

wouldn't use anything too big these are a nice size british five pence euro 5

cents those kinds of things so something around this kind of size will work

perfectly and the first thing I want to do is put your penny behind the biggest

thing is you want something that has room on either side to be underneath

because you don't want it to come through that slit and the next thing

I've got is my foam tape so this is my big roll of tape I have cut a piece

actually into thirds I use one on my sample to make sure it would work and

you just want to do that I cut it with the tonic scissors those little ones you

saw me earlier and they're nonstick so you can just cut through it and nothing

is going to get all stuck if you use a pair of regular scissors you may find

that it gets stuck oh I've dropped that piece here it is my lap so I like to do

double because I just feel that that extra little bit of depth you can use

the stamping up things that I often use and you'll see I've used those on a

piece in a second but I'm going to just do this double I like having something a

little bit thinner I find that it just goes through that groove in the best way

this I've played with lots of different ideas and this by far was the easiest

way to go like this now before I stick everything

in place I'm going to just peel this out and you want to grab your palette all so

this is the one that I use for heat embossing if you don't have this news

have the buddy run that in there but you want to run it on both sides and you

also want to just run it on these sides just on the side of that adhesive don't

get it on the top and should really have left my piece on but I got ahead of

myself a little bit so again we're going to just pop that slit over then you want

to grab your leprechaun and I love how he came out I think that's so cute

I may even add some glossy elements to him shortly but the next thing we want

to do is you want to work out how he's going to go so do you want him to go on

the angle up and down you might want him to be straight up and down I'm gonna go

mine on the angle because I think that looks kind of cute like this so you can

see here I can just move this and he is going to ride up and down so make sure

you've got enough clearance on there if you need to alter anything you want to

be able to do that now the next thing we're going to do is I already have a

set to you my green frame pre-cut and I actually added some strips of foam onto

the back of that this is a slightly thicker foam that I have on the back I

have a card base Neenah solar white just a two size and so I'm going to peel off

these adhesive pieces and this is slightly thicker so it'll give me some

extra dimension to my piece here and I'm going to Center this up first of all

like so so there's that done and now we're ready to stick our leprechaun down

but I do have a few tips for you so you need to make sure you can still move him

like this you can see that move nice and freely but down here you're going to

want to some thinner pieces of foam so that thin extra piece of foam I had put

your penny in place and or whatever coin you're using and stick your foam down

then you can just go back and use regular foam pieces I like to cut off a

long piece and anything extra I actually stick on the edge there

so we're going to stick this here I'm going to move this up here so that I

make sure plenty of room in there I'll have a piece in the middle make sure it

doesn't go up too high so just move your penny around and make sure that once

you've got all those foam pieces on there there's still plenty of clearance

on there again I'm going to do the same thing at the bottom I'm going to move my

leprechaun all the way down he's got stuck some ways foot got stuck

but I'm going to make sure I have enough room for that piece of foam just for

extra I'm gonna pop that up there so once you have all these pieces peel off

your back turn him around and then he will fit perfectly inside of your frame

which is why we cut that rainbow so I'm going to poke him in and then I'm just

going to use the point on these scissors just to make sure these points go in

here so I have another piece here of the Neenah solar white that I stamped on

here and this phrase are some great phrases in the heavy Doodle set let me

just grab it here so you've got happy Saint Patrick's Day

you're my lucky charm there's clovers you can put lucky on there more than

silver and gold so so many different ways that you can use it doesn't just

have to be as some patrick's day set at all and whenever i use a sentiment

that's a photopolymer i pop it on my table like this I'd let me move it up so

you can see better and then I take my block and I pick it up that means I'm

gonna get a nice straight sentiment if I want a curved sentiment that's great

but if you want a perfectly straight one that's the way to go I'm using the same

lawn fawn jet black that I stamped the images out that I colored in this one is

designed to work with alcohol markers and it really does so nicely now also in

this new release you'll see that Leslie has put in these great sentiment oops we

lost you well some great sentiment dies in there and the idea is that you

whenever we try and cut these pieces it's really hard to try and get them

straight so she's put these dies in stitched options and

just regular options really excited to get those as I say we didn't manage to

get the dies to the US in time for this release but they will be linked up

underneath this video for you so you can check those out they are now here and

I'm making this card so if you are new to the holo welcome first of all I'm

making this car for my husband who we refer to as mr. Hedgehog hallo he is

going to England next week to defend his PhD so we're hoping that when he comes

back he will be a doctor of engineering and he's been doing his PhD part-time on

top of his full-time job for four years and we just submitted his thesis on tire

engineering so a little bit it's something a little bit different but I'm

going to be sending this card with him while he goes to defend his ph.d so I'm

just going round and I'm cutting this out you can see how fiddly that was to

try and get it straight well once we have Lesley's dies that will be no more

so I'm not a secondly other thing I want to do is make it like it's raining a

little bit as well so this is the new vogue litter market involved let me show

you how it comes out there's going to be a crow painted in the gold like this but

I'm just going to be adding some little flecks of gold it's got some great

sparkle in it you can also use these on black so it looks like it's raining gold

you can see there so let's just add a few up here for when he's down a little

bit further and I love a nice spotty background too so you can see there how

that looks you could also add paint flakes if you wanted to but he is going

to sit in there perfectly I'm going to put him there

because I don't want any extra depth because otherwise our guy is not going

to jump over our ether so there we have it thanks so much for joining me as part

of the heavy Doodle released 3 don't forget to check out all the other girls

on the hop there's a blog list linked in the video description below plus of

course there's a supply list there for you and I look forward to seeing you

again very soon don't forget to give us a thumbs up or stamp it if you prefer

and click that subscribe button we'd love to have you back here at Hedgehog

hello again happy stamping bye

For more infomation >> Interactive Heffy Doodle Good Luck or St Patricks Day Cardmaking Tutorial - Duration: 22:04.

-------------------------------------------

Types of Bearings - Different Types of Bearings - Duration: 3:57.

A bearing is a machine element that constrains relative motion to only the desired motion,

and reduces friction between moving parts.

The design of the bearing may, for example, provide for free linear movement of the moving

parts or for free rotation around a fixed axis; or, it may prevent a motion by controlling

the vectors of normal forces that bear on the moving parts.

Most bearings facilitate the desired motion by minimizing friction.

Bearings are classified broadly according to the type of operation, the motions allowed,

or to the directions of the loads applied to the parts.

In this video I will go to show you Difference Types of Bearing and their application.

There are at least 6 common type of bearing, each of which operates on different principles:

Please click the subscribes bottom for more videos and press the bell icon get fast notifications.

Plain Bearings:

Plain bearings are the simplest type of bearing and are composed of just the bearing surface

with no rolling elements.

They have a high load-carrying capacity, are generally the least expensive and, depending

on the materials, have much longer lives than other types.

Plain Bearings are several specific styles: such as bushing, journal bearing, sleeve bearing,

rifle bearing, composite bearing.

Rolling-element bearing: Rolling-element bearing in which rolling elements

placed between the turning and stationary races prevent sliding friction.

There are two main types Ball bearing and Roller bearing.

Ball bearings are extremely common because they can handle both radial and thrust loads,

but can only handle a small amount of weight.

They are found in a wide array of applications, such as roller blades and even hard drives.

Roller bearings are designed to carry heavy loads.

the primary roller is a cylinder, which means the load is distributed over a larger area,

enabling the bearing to handle larger amounts of weight.

Jewel Bearings:

Jewel bearings are plain bearings with a metal spindle that turns in a jewel-lined pivot

hole.

They carry loads by rolling the axle slightly off-center and are usually used in mechanical

watches or clocks.

Fluid Bearings:

Fluid bearings support their load using a thin layer of gas or liquid and can be classified

into two types: fluid-dynamic bearings and hydrostatic bearings.

Fluid-dynamic bearings use rotation to form the liquid into a lubricating wedge against

the inner surface.

In hydrostatic bearings, the fluids - usually oil, water, or air , rely on an external pump.

Fluid bearings are used in high load, high speed or high precision application.

Magnetic Bearing:

Magnetic bearings support moving parts without physical contact, instead relying on magnetic

fields to carry the loads.

They require continuous power input to keep the load stable, thus requiring a back-up

bearing in the case of power or control system failure.

Flexure Bearing:-

A typical flexure bearing is one part joining two others, like a hinge, in which motion

is supported by a load element that bends.

These bearings require repeated bending.

Dear viewers Thanks for watching the video, any question write in the comment box.

Don't forget to like and share.

More update please subscribes our channel Learning Engineering, and get notification

to press the bell icon.

For more infomation >> Types of Bearings - Different Types of Bearings - Duration: 3:57.

-------------------------------------------

Top beauty benefits of lemon - Best skin care tips and ideas | Tamil Beauty Tips - Duration: 4:03.

Top beauty benefits of lemon - Best skin care tips and ideas | Tamil Beauty Tips

For more infomation >> Top beauty benefits of lemon - Best skin care tips and ideas | Tamil Beauty Tips - Duration: 4:03.

-------------------------------------------

레인보우 식스 아웃브레이크 브리핑 트레일러 (한글자막) - Duration: 1:41.

For more infomation >> 레인보우 식스 아웃브레이크 브리핑 트레일러 (한글자막) - Duration: 1:41.

-------------------------------------------

Лего Техник 42084 Грузовик – Обзор / Lego Technic 42084 Hook Loader - Review - Duration: 3:43.

Hi! Today I'll tell you about small set number 42084.

It has the smallest price but it has 5 parts more than 42071 set.

There are 176 parts in 42084 set.

I think we can find some useful parts here.

There are two instruction books in the box.

I won't assemble the B-model. It looks very simple.

The truck has two functions.

The first function is steering with HoG.

I don't like this function. It works rather sharp. The steering angle is small.

The second function is more interesting.

We can unload the bucket.

It's very cool that it disconnects automatically.

In the back part of the bucket we can see additional lock. It prevents sliding from side to side.

This function works well on the flat surface.

On the off-road it works not so good.

The set is rather good for its size. Most of all I don't like its design.

It looks really bad.

Lego introduced many cool small sets but this truck is epic fail.

The seats have no lock.

So the set isn't bad for its size. We can find some useful parts here and one cool function. The main disadvantage is the design.

Thanks for watching. Bye!

For more infomation >> Лего Техник 42084 Грузовик – Обзор / Lego Technic 42084 Hook Loader - Review - Duration: 3:43.

-------------------------------------------

Kingdom Hearts III - Trailer - Monstros S.A. - D23 Expo Japan 2018 - LEGENDADO PT-BR - Duration: 3:48.

For more infomation >> Kingdom Hearts III - Trailer - Monstros S.A. - D23 Expo Japan 2018 - LEGENDADO PT-BR - Duration: 3:48.

-------------------------------------------

నక్షత్ర దోషాలంటే ఏమిటి..?ఏ ఏ నక్షత్రవాళ్లకు దోషాలుంటాయి..? | Nakshatra Dosham | Dosha Nivarana - Duration: 9:00.

POOJA TV PRESENTS

For more infomation >> నక్షత్ర దోషాలంటే ఏమిటి..?ఏ ఏ నక్షత్రవాళ్లకు దోషాలుంటాయి..? | Nakshatra Dosham | Dosha Nivarana - Duration: 9:00.

-------------------------------------------

7 Signs You Have a Strong Personality (and it Might Scare Some People) | Analysis of Personality - Duration: 3:28.

people may be scared of you if you have a strong personality it is because they

don't understand you well if you are a person of strong personality it is not

like that you are dominating or rude to others but people may have a different

thinking on you though it is absolutely wrong we have the actual definition of

your personality today we are here to discuss on the signs you have a strong

personality that may scar others okay let's name the characteristics one you

can't tolerate excuses you are very strict on your hard work and possibility

to do better in life this is why you do not put up with excuses you emphasis on

someone's energy what they can do with instead of listening what they can't do

you refuse to listen to their complains you simply ignore what has gone wrong

and why they can't succeed you always emphasis on outcome not on the effort -

you are courageous to take challenge yes if you have no fears or courageous to

take the challenges you face you are a person of strong personality you are

normally honest in your decision so you are not afraid of the authorities 3 you

often avoid small talk you have a lot of ideas so of course you don't want to

waste time talking about others especially you were interested to talk

on ceiling matters such as what people are wearing or who is dating him and so

on actually small talk is unbearable to you and this quality makes you different

from others as most of the people try to find the shortcut our simple ways to

think they normally avoid major topics around us for you are a good listener to

others firstly people would be surprised to hear that you would be a good

listener to other people though you don't want to listen a silly excuse you

were eager to hear from others listening to people and giving them your honest

advice can be terrifying to someone who is used to living their life in a box of

conformity and shame but consciously you do it 5 you can live without the

spotlight if you've got a strong personality it means that you have a

magnetic personality as well people are actually eager to stick to you for your

ears - Craddock allottee they respect to you to your

personality but on the contrary you were averse to interact with the mass if

there is no big reason you do not need attention you don't want the cheap

publicity watch you have done matters you not want people think of you 6

insecurity is this opportunity to you yes it's amazing as you are a person of

strong personality insecurity is an opportunity to prove for you we all have

moments of insecurity but the courageous and confident people merely care of them

this is the definition of living to you when you were successful in a critical

situation people will be surprised to think of you a man or woman of strong

personality is an aim of hope patience inspiration and courage if it is you you

are the best congratulations to you it's true some people just aren't going to

like you they think that you are difficult to be around and why do you

think of yourself are we right to define you or something else to reveal feel

free to share your opinions and let us know the rest if it is a the like button

and subscribe if you find this video beneficial as for always stay happy stay

healthy and stay with smoochie

For more infomation >> 7 Signs You Have a Strong Personality (and it Might Scare Some People) | Analysis of Personality - Duration: 3:28.

-------------------------------------------

Samsung Galaxy S7 and S7 Edge Android Oreo update - Duration: 2:33.

The Samsung Galaxy S7 and S7 Edge have received a number of updates and security patches including

the Nougat update.

Samsung are now developing Android 8.0 Oreo for both devices, although they seem to have

slipped up and released it early to at least one S7 Edge user.

Samsung Galaxy S7 Edge received Oreo updated by mistake

In Vietnam, it appears that Samsung have made a mistake and rolled out the update to the

Galaxy S7 Edge, however it doesn't make sense that the manufacturer would send the latest

update to devices released prior to the S8.

The number of users who managed to download it is unclear

Although it has been confirmed that the Galaxy S7 and S7 Edge will receive the Oreo update

at some stage, it's safe to say that the rollout in Vietnam was made in error, due to the fact

that it was sent out so early.

The S7 Edge didn't even have an open beta program for Oreo, suggesting that the rollout

may be a mistake on part of the developers.

Samsung are currently working on the update for the following devices: Galaxy S7, Galaxy

S7 Edge, Galaxy A5 (2017), Galaxy A3 (2017), or the Galaxy Tab S3.

At a guess, we can expect this update to take a while to reach the US for the S7 and S7

Edge.

At least Android Oreo is finally rolling out to the Galaxy S8 and Galaxy S8+ in Europe

right now.

What do you think about the latest updates?

For more infomation >> Samsung Galaxy S7 and S7 Edge Android Oreo update - Duration: 2:33.

-------------------------------------------

Miraculous ladybug [Season 2] Pound it Episode 1-10 - Duration: 0:27.

Pound? are you okay far uhh.. sir?

Thanks for helping me out there. That was really nice of you.

I know wasn't it (well yeah but it will be great if you change yourself and start to learn how to being good)

I have to admit.. you take care of baby pretty well...

Pound it!

Pound it!

Pound it! (With Rena Rogue)

For more infomation >> Miraculous ladybug [Season 2] Pound it Episode 1-10 - Duration: 0:27.

-------------------------------------------

Live Match: India vs South Africa 4th odi 2018,Ind vs sa 4th odi 2018,score,live score,highlights - Duration: 0:51.

Live Match:

India vs South Africa 4th odi 2018,

Ind vs sa 4th odi 2018,

score,

live score,

highlights

For more infomation >> Live Match: India vs South Africa 4th odi 2018,Ind vs sa 4th odi 2018,score,live score,highlights - Duration: 0:51.

-------------------------------------------

Sofia the first Bunny Swap Memorable Moments - Ava Phillip - Duration: 15:24.

PLEASE LIKE, SHARE, COMMENT & SUBCRIBE video! Thanks you very much!

Bad little dragon

We can play music make freezenberg grades and have squished berries as a midnight snack. They're my favorites

I can't wait then. We don't have to let's have some now

Chris Furies are crackles favorite to him is my favorite

I've always wanted a baby dragon I didn't have to take care of

Adorable he smiled a

Baby dragon

Is it just the cutest thing ever where did you find it in the woods? He was all alone can I keep him, please?

oh

Right already we get it. He's cute

We'll take the Betty's to the kitchen I love your button nose the way you chew your toast

I want to dress you up and cover you with bows. I like ever the cutest thing

Me yes you coochie-coo

Hey, I hope it'll catch there

From your shiny scales

Shield your Wiggly

Crackle no loop-de-loops in the castle remember

Use your inside fire oh I can play you a lullaby

It's wasted on him babies can't appreciate good music

Did you see that clover she didn't even notice me. What are you talking about?

You're a grown dragon, but it's my

Blankie come on a break. He's probably cold

Oh, I can get this paper started. What hold it right there um

You're no baby. You can talk admit it Prabhat. I'll rip the tape with you if you keep quiet

What do you say pal I?

Say no way you phony baby crook yeah

But crispy is not a baby. He's a mean sneaky grownup dragon crook little crispy was me get rid of you

Tiny baby with tiny paws

She's never done anything like this before it's really not like her. Yeah, because I didn't do it hmm

He must been crispy. He's trying to make it look like I did it Sophia wait

It wasn't me who ate the pies honest. It was crispy. I know it crispy, but he's just a baby crackle

But we can talk about it later, okay

I'm telling you it was crispy. He's trying to get rid of me by turning Vivian against me

You're my best friend clover over

I told you the tool room see piles of gold zoom gems right behind this door

I mean

He's gonna run you out of this joint you big phony yeah, I don't think so, sweetheart has to do that

You'd have to catch me

Inkle Glover stuff

What why would you do that? I don't even know what to say, I never thought you could do something like this it was

Me so it was Chris penis

How to crackle now

It's tiny phony you've gotta tell Vivian, okay, I'll be back

Chuckle, what are you doing crackle wait come back crackle crackle crackle?

Sophia stop drunk open her was they too hard on her. I never meant for her to leave. I gotta go find her

Sophia will you keep an eye?

What double tape a human doesn't understand animals, so let's you play well, it's still not gonna stop me see

You are really not a baby amen. I can't leave you here. I'm gonna get you out

Listen we know I got angry, but I never ever ever wanted you to leave, huh

So I know can you use your amulet to some of the princess to help my amulet?

That's it it can make me small enough to fit through the keyhole. I knew what thank you something

No you are tiny and adorable I wish to be big

What are you doing my goodness go Farkle right front foot you are sparring

Crackle that was amazing cute little crispy as a thief

He is he just wanted to get into the castle so he could steal your jewels. I can't believe it

He just crushed my mandolin. Oh

Hi, I never should have doubted you crackle I'm so sorry

Can you forgive me? Ah?

Phooey yes, and we've got a cozy little fireproof. Cell waiting just for you oh

She's such a good dragon. She's the best dragon

Gone with the wand oh, I think I finally got it were me

Hardy

instructor

Of enchancia to visit him in his legendary Tower of Dragon hold this afternoon

Do you realize what an honor this is there's more? This is going to be the best day of?

Boom Cordelia the conjurer mr.. Pikula sir, I'm Sofia

I'm a friend of your uncle Cedric's any friend of uncle cities is the bestest best friend of mine

Wow yeah about that Cordelia, I am only in enchancia for a few days

And I'm determined to make the most of it shopping it spells Fifth Avenue lunch at the old you can conjure buffet

Oh, and I'm having an enchanted bitter no Cedric

You're such a dear for doing this, but now I'll be back at sundown to pick up my little angel thing

The invitation says I can ring - gasps why don't we just take Calista with us? Oh well I suppose McCool? Oh?

It's just a little phase Callisto's going through she's been taking things. I'm sure she'll grow out of it before too long

She can't come along what if she keeps doing what she's doing?

Let's go in there's lots of stuff to play with here

Hmm I

Was just practicing a new spell that can put a person inside a mirror

All you need is some water from a reflecting pool and a shiny silver bowl

This is mr.. Ban. Oh?

Would you like to try some fungus among them

I'll give you the grand coule of my tower. There's so much to see I'm not sure I've seen everything and I live here I

Have so much in here is the fall where I keep all my things?

My wonderful lungs my radiant rings inside of that take on some special

Mementos, I swam. Yeah, you will see

There's much more to show you

Wizard uncle ceddy yes well

Meeting Merlin was a dream come true for me

He even gazed powerful wand of the greatest wizard in the world you have to give it back right away

Do good old wizard

It's not

That didn't seem to stop you from taking it. I couldn't so only he can use it

You're no match for Merlin

I'll just take this one back to my fortress and figure out how to unlock it. Then I'll be able to use Merlin's

What are we going to do Merlin invited us into his power he trusted us, and this is how you repay?

Oh

Back for you and everything will be okay, right we'll take care of this together yes

There it is Morgana's fortress

Away from

Me

What's this

Google

is

Burglar, that's what st.. Thank you to bow gonna with pleasure

I know I didn't think something this bad could happen

That's the problem you didn't think at all you just took things

You're right, okay?

I'm

Sorry, I took your wand if you help us save uncle ceddy. I promise I'll never take anything ever again

What this calls for is a clever plan?

Hmm you know Morgana has so many mirrors in your fortress it's like

Place the wand you wish to unlock on the ultra of unravelling

Excuse me your evilness

Didn't I say not to disturb me. Oh you did it's just that I thought oh, don't see

admirers prostate okay open it

Agreed

Wait I mean well or the one with the glass slipper oh

Well, that's better I suppose you can stay

Put it over there boys once the dome is attached twisted in a counterclockwise direction

Next drop three troll tears on the dome

Wherever someplace where you can reflect on your evil deeds for a while Oh

Nonsense I haven't had this much fun in years

Farewell I shall always remember the name Cedric the sensational

Which is what I'm going to do from now on that's really good to hear Calista. Let's go home uncle ceddy

indeed Calista let's

For more infomation >> Sofia the first Bunny Swap Memorable Moments - Ava Phillip - Duration: 15:24.

-------------------------------------------

店員經典培訓教材：瑞氏綜合徵知多少 - Duration: 4:04.

For more infomation >> 店員經典培訓教材：瑞氏綜合徵知多少 - Duration: 4:04.

-------------------------------------------

Iron Maiden-Empire Of The Clouds - Duration: 17:59.

For more infomation >> Iron Maiden-Empire Of The Clouds - Duration: 17:59.

-------------------------------------------

Cảnh Báo Thực Phẩm Bẩn Trong Những Ngày Giáp Tết - Duration: 13:38.

For more infomation >> Cảnh Báo Thực Phẩm Bẩn Trong Những Ngày Giáp Tết - Duration: 13:38.

-------------------------------------------

To Get Rid of Keratosis Pilaris Here is N atural Treatment - Duration: 3:19.

Keratosis pilaris is a very common skin problem that causes hard reddish or whitish bumps to appear on

your skin this problem normally doesn't involve itchiness or pain and it can

appear on any part of the body although it is more common on the arms thighs

face and buttocks these little bumps are caused by a buildup of keratin and are

frequently confused with acne furthermore they can also cause your

skin to dry out and make it look ashy or flaky keratosis pilaris normally

disappears with time but you can treat it in several different ways

apple cider vinegar apple cider vinegar works wonders on keratosis pilaris its

astringent properties help clear pores and cleanses skin makes one part apple

cider vinegar with one part water and apply it directly onto the affected area

let the mixture sit on your skin for a few minutes before rinsing it off with

cool water try this remedy on a small portion of skin before applying it onto

a larger area of your body since some people can be very sensitive to this

remedy yogurt yogurt is very good at treating dry skin and improving your

skin's appearance put a little yogurt directly onto the affected area 15

minutes before taking a shower this will help reduce dryness and temporarily get

rid of the bumps rinse it off with cold or warm water mill lactic acid found in

milk can also be useful to treat keratosis pilaris by soothing and

hydrating dry skin take a milk bath by adding two to three cups of milk to your

normal bath water lay in the bathtub for at least 20 minutes in order to treat

the breakouts more effectively apply a small quantity of milk directly onto the

bumps oats oats are a great way to soothe dry skin they can also be used as

a gentle exfoliant to help remove impurities and dead skin cells make a

paste by mixing a little water with some oats put

the paste on your face like a mask and let it sit for 15 minutes remove the

mask carefully with a warm wash rag and see the immediate results sour cream

like the yogurt sour cream also contains lactic acid an exfoliant made out of

sour cream and sugar can help remove dry skin without worsening your condition

coconut oil coconut oil is an excellent natural moisturizer it cleanses dry skin

safely and helps improve skin problems apply coconut oil directly onto your

skin after bathing you can repeat the application several times a day as needed.

For more infomation >> To Get Rid of Keratosis Pilaris Here is N atural Treatment - Duration: 3:19.

-------------------------------------------

For more infomation >> To Get Rid of Keratosis Pilaris Here is N atural Treatment - Duration: 3:19.

-------------------------------------------

Pourquoi le salage des routes n'est pas la panacée - Duration: 7:07.

For more infomation >> Pourquoi le salage des routes n'est pas la panacée - Duration: 7:07.

-------------------------------------------

For more infomation >> Pourquoi le salage des routes n'est pas la panacée - Duration: 7:07.

-------------------------------------------

Bangla News Live 10 February 2018 Bangla Khobor Bangla Songbad Taja Khobor Ajker Khobor BD News - Duration: 13:58.

BANGLA NEWS LIVE

For more infomation >> Bangla News Live 10 February 2018 Bangla Khobor Bangla Songbad Taja Khobor Ajker Khobor BD News - Duration: 13:58.

-------------------------------------------

For more infomation >> Bangla News Live 10 February 2018 Bangla Khobor Bangla Songbad Taja Khobor Ajker Khobor BD News - Duration: 13:58.

-------------------------------------------

Vue d'Ailleurs?? What is that?? - Duration: 2:33.

Hi everybody and welcome to Vue d'Ailleurs

Today we're gonna......Hoho wait a minute! What are you doing?

Hi! Excuse me!

You cannot do the same stuff every single time

You have to explain what "Vue d'Ailleurs" is

What?

Well....You're filthy

Yep, Somebody has to work while you're doing your vidéos

I go back to work

Well let's do it

At the beginning Vue d'Ailleurs was just memories for my friends and I

But it quickly turned into travel video to give you the willing to travel

Today I'm in Kyoto in Japan

I'm in Auckland in New Zealand

we're at Hobbitton

We are at Hokitika

in Chiang Rai in north of Thailand

in Khao Yai national park

When you're travelling your mind start to open

and gap between tradition and foreign culture doesn't seems that big

To travel changes the way you see

It is what represent Vue d'Ailleurs

But I was able to do much better!

That's why I made video with my tips and advices

about travelling and working holiday visa

and more recently I create new video "Traditions d'Ailleurs"

to talk about traditions and customs around the world

To follow Vue d'Ailleurs it's pretty easy

You can subscribe to my Youtube channel, you can also follow my blog Vuedailleurs.net

or you can find me on social networks Facebook and Twitter

So I see you very soon in the next video

Bye!

For more infomation >> Vue d'Ailleurs?? What is that?? - Duration: 2:33.

-------------------------------------------

For more infomation >> Vue d'Ailleurs?? What is that?? - Duration: 2:33.

-------------------------------------------

Nefes Nefese (Lélegzet nélkül) előzetes HunSub (török sorozat) - Duration: 1:29.

For more infomation >> Nefes Nefese (Lélegzet nélkül) előzetes HunSub (török sorozat) - Duration: 1:29.

-------------------------------------------

For more infomation >> Nefes Nefese (Lélegzet nélkül) előzetes HunSub (török sorozat) - Duration: 1:29.

-------------------------------------------

Amsterdam - The Airbnb city - (VPRO documentary - 2016) - Duration: 46:41.

For more infomation >> Amsterdam - The Airbnb city - (VPRO documentary - 2016) - Duration: 46:41.

-------------------------------------------

For more infomation >> Amsterdam - The Airbnb city - (VPRO documentary - 2016) - Duration: 46:41.

-------------------------------------------

Interactive Heffy Doodle Good Luck or St Patricks Day Cardmaking Tutorial - Duration: 22:04.

hi welcome to Hedgehog Hollow I'm so excited to be here finally doing some

front on videos in my new room we're still working on the backdrops you'll

see some changes come along in future videos but today I'm here as part of

heavy dual or release number three for a wonderful blog cut with some mazing

crafty girls I'm using the new lucky friends there which is a good lucks and

patrick's day kind of set and we're going to be making an interactive card

of a leprechaun that jumps along our rainbow is so cute and it's really

simple to do I'm excited to show you how to make your own interactive card so

let's get started

so today I'm using the lucky friend stamp set from the new Heaphy doodle

release once its release is also going to be some coordinating dies that we've

got a preview of at creative ation and this guy here when you cut him out his

hands can hold this horseshoe the gold the beer the coins all these really cool

things in there so check those dyes out as well I'll make sure I link those in

the description for you too there are also some great words that go with this

release Leslie gave me this a creative Asian because the shipping time to the

US and I was super excited to use it so check out the rest of the release it's

really cute and Easter sets in there there's some lovely mice that I'm

looking forward to getting and some great new dyes as well including some

interactive dyes and also some words are in there too that are all hand lettered

by Leslie so the first thing I'm going to do is I'm going to be coloring in my

pieces now I cut these out using my scan and cut because I didn't have the dyes

for those but as I say you really do want to try and get the dyes because

this is really cute and I'm looking forward to mine

arriving coloring wise today I'm using my new bow markers and I have these in

this wonderful Nouveau piece it has a little feet on the bottom there and

these Nuvo pen are great value they're alcohol-based markers and you can buy

them in color sets you get three greens through yellows through oranges however

you want to buy I have them all here I have lost one of my yellow so I'm going

to have to replace that one but they're great you get blended in there there's

blacks there's metallics and this is just some temporary taupe this is tombow

removable adhesive whenever I'm coloring something that I've pre-cut out I just

put some of that adhesive on the back there try a little bit more there and

you always want to color with alcohol markers on a porous background so this

is just a piece of white printer paper so I'm going to stick these onto and

this just means that they won't move around while I'm coloring them so that

makes that so much easier I'm gonna start off by using my greens so here you

have this is the woodland greens I stick some labels on the side just because I

do videos and things and I want to always remember what they're called so

these are my three green shades so I have a four one three or four one five

and a four one seven here and so I have a light to dark and I'm going to just

work through like with any alcohol markers I'm also going

to be using my supreme metallics this is the gold which will go onto his hat I've

got a couple of yellows as I say I have lost one of my yellows here but I'll be

using the sunshine yellows I've got my blenders and then there's also a really

nice fair skin tones which are going to be perfect for his legs and his face and

things in there so I'm going to get coloring I'll play some nice music now

and you can see how he comes together

so the next thing we want to do is build our rainbow and I've already pre-cut

from the lawn fawn rainbow cardstock see my favorite things end of the rainbow

that I had in my stash and this is a great ring with those some other

rainbows out there that I really like there's a lawn fawn one I do have

another my favorite things one but this one was perfect so this is what I had in

my stash so I'm going to be using this one so the first thing we're going to do

is peel off the backing layer of this double-sided adhesive so peel that one

off and then that allows us to start assembling our rainbow and we can then

work out where we want to put it this stuff is super super sticky so I don't

know about you but I always say it the song in my mind so we've got the red

we'll go first so I'm just going to pop the red down on here and then I'll have

the yellow or meet up with it

I'll have our yellow make sure that meets up nicely I didn't do any paint

because you only get six slots so I'm going to move straight on to my green

and then purple

and then orange

and now the balloon now I've arranged these so that I'm going to give them a

straight end when you look at this they actually come to a V but this is going

to work better for the card design that we're using so I have my tonic scissors

these are the Tim Holtz's they're a nonstick scissors so they work really

nicely if you're using things like double-sided adhesive and I'm going to

just trim these straight across because that's how it's going to work for our

pot of gold and then I'm just going around here now the other thing I'm

going to do so I have a little some pieces left here so I'm going to snip

one at this end and you'll see how it just scissors come clean off which is

exactly what we want so these two pieces are not going to go to waste

I'm going to now just lay another one on here and make sure that they all meet up

and I'm going to use the same on this one here but I'm also before I cut it

down I'm just going to turn it over so I can make sure they all go together

nicely so it will be a little bit forgiving this Elizabeth craft adhesive

is super strong but it does give you a little bit of wiggle room so if you

don't press it down it won't stick fully until you're ready so as I lay those in

I'll press it in and there we have our rainbow so I'm gonna put that to the

side well we now assemble that interactive element so now we're ready

to do our assembly we have our finished rainbow here I just trimmed that addi

civ so that it's all nicely together on the back there we also have our little

pot of gold here I've pre-cut my pieces from some lawn fawn dyes these are

called outside in stitch scarlet rectangle stackables and they will be in

the description below for you as well I cut one in the white which is going to

be my inside and then I cut one in the same as she does different green it's

called noble fir but it's a really nice and Patrick screen which is going to go

on the outside there as well so to do this next step I have my pot of gold

I've actually put a little slit in there so

you can see there there's a slip and for that the slit is there so that we can

put our rainbow inside and I have a piece of foam on there to give me the

depth of where it's going to be and I'm now are going to align this at the same

time I have my slide on over he's from non-phone which is going to be

our interactive element now there's going to be slide on over semi circles

and if you're part of the Hedgehog Hollow subscription box these the new

ones are going to be in there these are the older ones they're slightly

different so my pot of gold is going to go somewhere in the middle bottom down

here and then I'll slide on over circle is going to go next to it like this so

the first thing I'm going to do is grab some of my Tamiya tape this is my

favorite tape for die-cutting it's a really nice low tuck tape so I'm going

to put that in place first and then the next thing I'm going to work out is I'm

going to grab this back again which is my piece here and I'm going to just trim

those little metal pieces off of there these are my favorite little wire

cutters I'm just doing this over the bins so that they go straight and you

can also take some sanding paper and cut those off but I find that just those

tall nodules are fine on that now the next thing you're going to do is you're

going to position your rainbow where you want it to be and then you're going to

put this back over the top and what you'll do is you'll feel it clicks into

place so I'm just moving mine over so I can feel that that's not really moving

it's clicked into the same place I'm going to work out when my rainbow wants

to be round about here and this is where you could almost do with a couple of

hands I'm going to grab some tape so it's ready to go to get on my hand there

just feel that click back in there we go a rainbow in place

and then I'm going to stick this on here and I'm going to run these through my

Gemini machine so I'm going to run the rainbow through on here and I'm going to

run my slide on over here that means my rainbow is going to match up perfectly

here and my slide on over circles going to be there for our interactive element

so if you haven't seen me use my Gemini machine before I have the Gemini junior

and it stays on my desk I absolutely love it so I'm going to turn this over

your sandwich is actually upside down with the Gemini so it's Di's facing up

and I'm going to make sure they don't overlap which is possible and then what

happens when you get this into the Gemini you're here I'm not pressing any

buttons I've got one hand here and the other hands over here it hooks it in so

it's pulling that through now and once it comes out the other side we're all

done so it puts a nice amount of pressure on there so even with all that

thickness and the adhesive paper on there it's cut through so easily which

is amazing and I'm going to just gently pull this up peel that tape off on the

other side so I've got that scholar to edge which is going to match up

perfectly on my frame and those stitches and then on this one here we have that

interactive element on that so let's now start assembling the pop

all these pieces out the way this is just my little cutting board that I use

to cut my slit in but I'm going to leave it here for now so the next thing we

want to do is put this the other way up like this we're going to put some foam

on the back of this piece here and to do that I'm going to first of all peel off

the Elizabeth craft adhesive

try and catch an edge there we go this so we're going to slop this through that

little hole and before I press anything down I'm going to line it up with this

corner let's press it down I'm going to take that foam off the back of my thing

it's just my scotch 3m tape there and the reason I popped this up is just cuz

otherwise it's a little bit bulky and you don't get the best of dzn so I'm

going to do that and I'm gonna stick my pot of gold down so our leprechaun is

going to ride down our rainbow like this that's how he's going to go so now we're

next we're ready to build our slider pieces now I just grabbed some coins out

my drawer I have a British 20 pence piece that happened to be sitting in the

drawer an American penny works you can use a dime you can use five cents I

wouldn't use anything too big these are a nice size british five pence euro 5

cents those kinds of things so something around this kind of size will work

perfectly and the first thing I want to do is put your penny behind the biggest

thing is you want something that has room on either side to be underneath

because you don't want it to come through that slit and the next thing

I've got is my foam tape so this is my big roll of tape I have cut a piece

actually into thirds I use one on my sample to make sure it would work and

you just want to do that I cut it with the tonic scissors those little ones you

saw me earlier and they're nonstick so you can just cut through it and nothing

is going to get all stuck if you use a pair of regular scissors you may find

that it gets stuck oh I've dropped that piece here it is my lap so I like to do

double because I just feel that that extra little bit of depth you can use

the stamping up things that I often use and you'll see I've used those on a

piece in a second but I'm going to just do this double I like having something a

little bit thinner I find that it just goes through that groove in the best way

this I've played with lots of different ideas and this by far was the easiest

way to go like this now before I stick everything

in place I'm going to just peel this out and you want to grab your palette all so

this is the one that I use for heat embossing if you don't have this news

have the buddy run that in there but you want to run it on both sides and you

also want to just run it on these sides just on the side of that adhesive don't

get it on the top and should really have left my piece on but I got ahead of

myself a little bit so again we're going to just pop that slit over then you want

to grab your leprechaun and I love how he came out I think that's so cute

I may even add some glossy elements to him shortly but the next thing we want

to do is you want to work out how he's going to go so do you want him to go on

the angle up and down you might want him to be straight up and down I'm gonna go

mine on the angle because I think that looks kind of cute like this so you can

see here I can just move this and he is going to ride up and down so make sure

you've got enough clearance on there if you need to alter anything you want to

be able to do that now the next thing we're going to do is I already have a

set to you my green frame pre-cut and I actually added some strips of foam onto

the back of that this is a slightly thicker foam that I have on the back I

have a card base Neenah solar white just a two size and so I'm going to peel off

these adhesive pieces and this is slightly thicker so it'll give me some

extra dimension to my piece here and I'm going to Center this up first of all

like so so there's that done and now we're ready to stick our leprechaun down

but I do have a few tips for you so you need to make sure you can still move him

like this you can see that move nice and freely but down here you're going to

want to some thinner pieces of foam so that thin extra piece of foam I had put

your penny in place and or whatever coin you're using and stick your foam down

then you can just go back and use regular foam pieces I like to cut off a

long piece and anything extra I actually stick on the edge there

so we're going to stick this here I'm going to move this up here so that I

make sure plenty of room in there I'll have a piece in the middle make sure it

doesn't go up too high so just move your penny around and make sure that once

you've got all those foam pieces on there there's still plenty of clearance

on there again I'm going to do the same thing at the bottom I'm going to move my

leprechaun all the way down he's got stuck some ways foot got stuck

but I'm going to make sure I have enough room for that piece of foam just for

extra I'm gonna pop that up there so once you have all these pieces peel off

your back turn him around and then he will fit perfectly inside of your frame

which is why we cut that rainbow so I'm going to poke him in and then I'm just

going to use the point on these scissors just to make sure these points go in

here so I have another piece here of the Neenah solar white that I stamped on

here and this phrase are some great phrases in the heavy Doodle set let me

just grab it here so you've got happy Saint Patrick's Day

you're my lucky charm there's clovers you can put lucky on there more than

silver and gold so so many different ways that you can use it doesn't just

have to be as some patrick's day set at all and whenever i use a sentiment

that's a photopolymer i pop it on my table like this I'd let me move it up so

you can see better and then I take my block and I pick it up that means I'm

gonna get a nice straight sentiment if I want a curved sentiment that's great

but if you want a perfectly straight one that's the way to go I'm using the same

lawn fawn jet black that I stamped the images out that I colored in this one is

designed to work with alcohol markers and it really does so nicely now also in

this new release you'll see that Leslie has put in these great sentiment oops we

lost you well some great sentiment dies in there and the idea is that you

whenever we try and cut these pieces it's really hard to try and get them

straight so she's put these dies in stitched options and

just regular options really excited to get those as I say we didn't manage to

get the dies to the US in time for this release but they will be linked up

underneath this video for you so you can check those out they are now here and

I'm making this card so if you are new to the holo welcome first of all I'm

making this car for my husband who we refer to as mr. Hedgehog hallo he is

going to England next week to defend his PhD so we're hoping that when he comes

back he will be a doctor of engineering and he's been doing his PhD part-time on

top of his full-time job for four years and we just submitted his thesis on tire

engineering so a little bit it's something a little bit different but I'm

going to be sending this card with him while he goes to defend his ph.d so I'm

just going round and I'm cutting this out you can see how fiddly that was to

try and get it straight well once we have Lesley's dies that will be no more

so I'm not a secondly other thing I want to do is make it like it's raining a

little bit as well so this is the new vogue litter market involved let me show

you how it comes out there's going to be a crow painted in the gold like this but

I'm just going to be adding some little flecks of gold it's got some great

sparkle in it you can also use these on black so it looks like it's raining gold

you can see there so let's just add a few up here for when he's down a little

bit further and I love a nice spotty background too so you can see there how

that looks you could also add paint flakes if you wanted to but he is going

to sit in there perfectly I'm going to put him there

because I don't want any extra depth because otherwise our guy is not going

to jump over our ether so there we have it thanks so much for joining me as part

of the heavy Doodle released 3 don't forget to check out all the other girls

on the hop there's a blog list linked in the video description below plus of

course there's a supply list there for you and I look forward to seeing you

again very soon don't forget to give us a thumbs up or stamp it if you prefer

and click that subscribe button we'd love to have you back here at Hedgehog

hello again happy stamping bye

For more infomation >> Interactive Heffy Doodle Good Luck or St Patricks Day Cardmaking Tutorial - Duration: 22:04.

-------------------------------------------

For more infomation >> Interactive Heffy Doodle Good Luck or St Patricks Day Cardmaking Tutorial - Duration: 22:04.

-------------------------------------------

La maison de Serge Gains­bourg trans­for­mée en musée : la pièce que Char­lotte REFUSE - Duration: 2:54.

For more infomation >> La maison de Serge Gains­bourg trans­for­mée en musée : la pièce que Char­lotte REFUSE - Duration: 2:54.

-------------------------------------------

For more infomation >> La maison de Serge Gains­bourg trans­for­mée en musée : la pièce que Char­lotte REFUSE - Duration: 2:54.

-------------------------------------------

Vivre en autonomie - Bilan année 1 [2017] - Duration: 8:48.

For more infomation >> Vivre en autonomie - Bilan année 1 [2017] - Duration: 8:48.

-------------------------------------------

For more infomation >> Vivre en autonomie - Bilan année 1 [2017] - Duration: 8:48.

-------------------------------------------

2/9/18 10:37 PM (5555-5611 N Driscoll Blvd, Spokane, WA 99205, USA) - Duration: 1:09.

For more infomation >> 2/9/18 10:37 PM (5555-5611 N Driscoll Blvd, Spokane, WA 99205, USA) - Duration: 1:09.

-------------------------------------------

For more infomation >> 2/9/18 10:37 PM (5555-5611 N Driscoll Blvd, Spokane, WA 99205, USA) - Duration: 1:09.

-------------------------------------------

Valentine Special Hindi Shayari 2018 || Valentine Day Romantic Status || Hindi Shayari || I Love You - Duration: 2:35.

Valentine's Special Video

For more infomation >> Valentine Special Hindi Shayari 2018 || Valentine Day Romantic Status || Hindi Shayari || I Love You - Duration: 2:35.

-------------------------------------------

For more infomation >> Valentine Special Hindi Shayari 2018 || Valentine Day Romantic Status || Hindi Shayari || I Love You - Duration: 2:35.

-------------------------------------------

Free 2018 TrapSoul / Toronto...

For more infomation >> Free 2018 TrapSoul / Toronto...

-------------------------------------------

Mazda CX-3 2.0 SkyActiv-G 120 GT-M Line 2WD Automaat Navi/Leder/Headup/18inch - Duration: 0:54.

For more infomation >> Mazda CX-3 2.0 SkyActiv-G 120 GT-M Line 2WD Automaat Navi/Leder/Headup/18inch - Duration: 0:54.

-------------------------------------------

Miraculous ladybug [Season 2] Pound it Episode 1-10 - Duration: 0:27.

Pound? are you okay far uhh.. sir?

Thanks for helping me out there. That was really nice of you.

I know wasn't it (well yeah but it will be great if you change yourself and start to learn how to being good)

I have to admit.. you take care of baby pretty well...

Pound it!

Pound it!

Pound it! (With Rena Rogue)

For more infomation >> Miraculous ladybug [Season 2] Pound it Episode 1-10 - Duration: 0:27.

-------------------------------------------

【MUKBANG】 Making Japchae Using Korean Vermicelli Dang Myun!! 12 Servings [5Kg] 6100kcal [Click CC] - Duration: 7:40.

Hello its Kinoshita Yuka ( English subtitles by ~Aphexx~ )

so today! tadaa I've received these 'Danmeon' clear noodles From a Korean viewer and I'll make some ?chapsuu? out of them

This is a Korean sesame oil which I'll be using to make this dish

I've eaten this this before but never made it myself I can't wait to get started

I also have a recipe for this TYVM as always

Alrighty let's get to making it

These are the ingredients

These are the clear noodles from Korea

This recipe will serve 12

Reconstitute in lukewarm water For 30 minutes to an hour

While that is going on Marinate the meat

Soy sauce, sugar

Pepper

Ginger Let that marinate

Chop up and boil the spinach and shirataki shrooms

Flavor with salt and sesame oil

This is a sesame oil that was sent to me

Is it just me or does this sesame oil Have a stronger aroma

Looks yummy as is

Chop the carrot into strips

Chop the onion and peppers as well

Add sesame oil to a pan Then add the onions and pepper

Sesame oil So good

And cook the carrot

Such tropical colors

Then add the marinating meat

Then boil the noodles that we let sit in water

Wash in cold water to get rid of the sliminess Then add soy sauce

Sugar

Salt, sesame oil, pepper And mix

Combined with the meat and veggies

Mushroom and spinach

tadaa it's done

It's so colorful and looks so yummy

With the dish it's 4.1kg

Along with 5 cups of rice and One kilogram of miso soup

itadakimasu They stretch like rubber bands

It's so very chewy With that sesame oil and pepper flavor its so yummy

The sauce is super delish

soy sauce flavored with a hint of sweetness And a hint of ginger

hot

The rice is so fresh and hot that the bowl is so hot to the touch

Goes great with a rice

That was dangerous for my hands though

meat so yummy

As for veggies we've got onion, spinach, carrot, pepper and shrooms

Packed with all sorts of things And filled with different types of mouthfeel

Since we left the spinach and mushrooms Marinade its got a nice sesame oil flavor

this bowl be hot

will it never cool down?

Look at how much steam comes off it

I don't have these shiratake mushrooms that often

yummy its chew~nky... I dunno quite how to explain

but I totally love the mouthfeel

These noodles sort of resemble our 'harusame' noodles in that they are so chewy and stretchy

Big Slice of meat ~ uncut ~

It's alright though since I love me so much

They're even yummier when they Sit in the sauce for a while

This part of the bowl is so fraggin hot

Despite being that far away from the bowl It still retains its heat

yummy but so tough to eat

I'm now able to hold it ~ still hot tho ~

( your translator ~Aphexx~ is using dictation software to make these subs..... mistakes happen.... they're going to happen a lot.... be chill my dudes )

This is how I cool it off

I must take my time to chew And allow things to cool off as well

Final mouthful itadakimasu

All done gochisosamadeshita

the ?chapgaei? noodles were so slick and yummy

It was flavored with soy sauce sugar and sesame oil A flavor combination that I totally love

It was also nice to get so much of my daily veg in

and since the sesame oil was direct from Korea I feel as though it was a bit more legit and authentic flavor

Paired nicely with rice It was so yummy won't you all please give it a try

And as always thank you for watching if there is anything Do you want me to do or eat please tell me in the comment Section below and if you like this video please hit The like And subscribe buttons BAI BAI

For more infomation >> 【MUKBANG】 Making Japchae Using Korean Vermicelli Dang Myun!! 12 Servings [5Kg] 6100kcal [Click CC] - Duration: 7:40.

-------------------------------------------

Jak zrobić piękny i kobiecy makijaż walentynkowy? How to do valentine's day makeup? - Duration: 4:58.

Hi! My name is Aga Wllk. Welcome to my channel „The Beauty Runway."

Meet my model Natalka!

Due to upcoming V Day I prepared an easy, soft and very feminine Valentine's Day makeup look.

I'm going to show you how to do it step by step.

I'm going to start with skincare.

Keep in mind that the right skincare routine is key to any makeup look.

I clean the skin with a micellar water.

Then, instead of a traditional toner I use a heavenly smelling rose water.

I spray it all over the face and wait for it to absorb into the skin. You may gently pat it into skin.

Personally I use it in the morning and before bed.

I moisturize the skin using a face oil.

I thoroughly massage it onto the model's face and wait until it absorbs.

The oil will nourish and moisturize the skin, as well as make it glowy. Added points for bonding well with our makeup.

Moving on to makeup.

I apply a sheer amount of foundation just to even out the skin tone.

I want to avoid the mask-like effect.

What I'm using today is a highlighting and moisturizing foundation.

You may apply it with your fingers, brush or a sponge.

Remember to spread the foundation onto the neck as well.

Under the eyes I put a thin layer of a pink-colored concealer to cover dark circles.

Moreover, using Touche Eclait I'm going to highlight under eye area, nose, forehead and cupid's bow.

During our skincare I forgot about the lip balm, so I'm applying it now.

Remember to moisturize the lips prior to doing makeup.

With a fair amount of translucent powder I finish the base.

Eyebrows. I brush them upwards and fill them in with an eyebrow pencil form Benefit.

I do it with a light hand so that it looks natural.

Moving on to eye make-up. I highlight an inner corner and the whole eyelid with a highlighter.

Then I apply a soft pink shimmering Huda eyeshadow all over the eyelid.

I blend the edges.

I apply a darker shade, such as brown, pink or deep red to the outer corner. Then I blend again.

I repeat all the steps on the lower eyelid.

I highlight the inner corner of the eye.

Then, along the lower lash line I put a soft light pink eyeshadow and with a darker shade I accentuate the outer corner.

I curl the lashes using my eyelash curler and put a mascara on.

For today I've chosen a very Valentine's Day style one, Better Than Sex from Too Faced.

I apply mascara starting from the roots of the lashes brushing it to the ends.

I apply a bit of blusher into the cheeks.

With a soft natural looking shade of stick highlighter I accentuate the cheek bones, bridge of the nose, cupid's bow and forehead.

On previously moisturized lips I apply one of my beloved lipsticks from Glossier.

Here I'm using a very sexy looking shade called Zip.

I wish you all tons of love not only on Valentine's Day <3

Subscribe to my channel and visit my Instagram @agawilkmakeup and The Beauty Runway blog.

Kisses & See you soon!

For more infomation >> Jak zrobić piękny i kobiecy makijaż walentynkowy? How to do valentine's day makeup? - Duration: 4:58.

-------------------------------------------

Marshmello & Anne-Marie - FRIENDS (Vertical Video) *OFFICIAL FRIENDZONE ANTHEM* - Duration: 1:15.

Oh Ohhh Oh Ohhh woh ~

Oh Ohhh Oh Ohhh woh ~

You say you love me.

I say you crazy

We're nothinbg more than FRIENDS

You're not my lover

more like a brother

I know you we were like 10

Yeah, Don't mess up

Talking that sh*t

Only gonna Dush me away

That's it!

When you say you you LOVE me

That make me a CRAZY

Here we go again

Don't go look at me

with that look in your eye

You really ain't going away

without a fight

You can't reasoned with

I'm done being polite

I've told you

1 2 3 4 5 6000 times

Haven't I made it Obvious?

Haven't I made it Clear?

Want me to spell it out for you?

F R I EN D S

Haven't I made it Obvious?

Haven't I made it Clear?

Want me to spell it out for you?

F R I EN D S

F R I EN D S

Creepster Music

For more infomation >> Marshmello & Anne-Marie - FRIENDS (Vertical Video) *OFFICIAL FRIENDZONE ANTHEM* - Duration: 1:15.

-------------------------------------------

Georgie is alive ? | Top 10 deleted scenes from IT! | [+18] [60FPS] - Duration: 6:01.

Hi, Did you know that in the movie IT! there should be other scenes that were cut out?

No? "Then continue on with the video and get ready for a whole new look at this movie."

The first scene is probably a joke and should never be in the movie.

Georgie takes his boat and leaves the clown down there in shitty water.

And there is Bill's family dinner, but without Georgie.

Another cut out scene is continuation to the scene in movie:

Bill's first encounter with Pennywise (You float too!)

What to say to Henry is just get Fucked up.

In the past scene, Henry killed his buddies, and now Sten is afraid to go in.

The Losers find Georgie's walkie

When Eddie fell to the lower floor of the house where they were looking for Pennywise,

he broke his hand, and this is his rescue.

When Sten had a speech at the end of his Mitzvah bar, He got angry

This clip is not almost different from the movie, but when we look at the customer

We can see a director of the movie.

The last scene was supposed to be at the end. it is possible to see Bill's family moving from Derry.

If you liked this video click the like button,

and write in the comments what scene would you like to see in the movie

or which you would not want there.

In the last seconds of the video, we'll show filming of IT!

For more infomation >> Georgie is alive ? | Top 10 deleted scenes from IT! | [+18] [60FPS] - Duration: 6:01.

-------------------------------------------

LEVENDE BAMSE PRANK PÅ MIN LILLEBROR **HAN GRÆD** - Duration: 4:33.

Whats up everybody and welcome to my channel

so today I'm going to make this sick prank

on my little brother

I hope, that it will go well

but my brother is not home yet

He is in kindergarten

I'm going to get him, because I'm going to prank him when he gets home

I have received a teddy bear costume

from Partyking.dk

The website is right here, otherwise there is also a link in the description

so if you could think of something from that website

then please check it out

I can just show you the teddy bear

the bear looks like this

im going to take it on

then I put more things in so I'm going to look thick

Then I'll look like a real teddy bear

Then Im telling my little brother that I've got a huge teddy bear and he can go play with it

while he is in his own room, im going to change to the teddy bear

and then I get one of my siblings to get him into my room

so he can "play with the teddy bear"

What he doesn't know is that I'm in the teddy bear

I'm going to scare him

We'll see how he reacts

give a like for more videoes

and remember to subscribe

write a nice comment and i will put you on my next video

I'm going over to pick him up now

hjælp med at gøre underteksterne færdige :)

For more infomation >> LEVENDE BAMSE PRANK PÅ MIN LILLEBROR **HAN GRÆD** - Duration: 4:33.

-------------------------------------------

[2x06] Mitad y mitad / Lyrics + Translation - Duration: 1:59.

The world changed

In only one sigh

Now nothing is the same

Even not when I breath

I see you walking by

I forget everything

Are you the love

Or will it be in another way

Now you're part of me

I need you

Come closer please

I waited for you without knowing

A moment changed my life

I waited for you without knowing

And now I see another reality

Half and half

Everything is new

A moment changed my life

I waited for you without knowing

And now I see another reality

Hlaf and half

Everything is new