Hey Everybody,
Evan here from Evan's Detailing and Polishing .
Today we got some really cool UTVs here.
We're gonna do some detailing on them.
Hanging out at Assault Industries
one of the leading manufacturers
of custom bolt-on after market accesories for UTV's.
What we've got here is a CAN-AM Maverick X3 Turbo R.
We're gonna be doing our full detail on this thing today.
Im gonna show you the step-by-btep proccesss we use in my shop.
We've also got a really cool Polaris RZR back there
and of course their custom ride that they built, all carbon fiber back here.
Some really cool ries to hang out with today
I want to thank Assault Industries for letting us do this.
What we're gonna do is break down
and get into how to fully detail this thing.
Alright, first thing we're gonna do on this CAN-AM Turbo
Is we're gonna rinse it all off.
Now why would we do that?
Because its covered in dust and dirt.
One thing I want everyone to remember
is we rinse between every step of product
Doesnt matter if we're using our All Purpose Cleaner
or if we're oing our wash and foam
either way, you want to rinse before each step.
Now this one right here, like we said has been through a whole weekends worth of riding
This has got dust and dirt all over it
we want to rinse it down first. Get all the light particles off so we can get into our wash.
Alright, now that we got the whole thing rinsed down,
we got all our heavy stuff off, we got all the lighter stuff off.
First thing im gonna do is im gonna use the All Purpose Cleaner
We're gonna use it on the wheel wells, we're gonna use it on the wheels, we're gonna use it anywhere where there's a lot of heavy grime still.
Anywhere where we want to get it that nice fresh clean.
I'm gonna soak it down real good, brush as much of it as I can,
and then keep rinsing
So, if you're the mud guys,
first thing youre gonna see, you're gonna see a
lot of mud in all your real heavy nooks and crannys.
What I'm looking for is
anything in here.; grease, grime.
with all the sand guys, you're going to get sand everywhere
so you're going to want to spray as much underneath as you can
but with the mud guys its usually
focused in the areas the tires are at.
You will get it all over the place but most
of that stuff will rinse off when you're spraying.
but what I'm doing is I'm looking for all the heavy stuff in here
I'm going to use it to spray down my shocks,
the wheel wells, and of course the tires really good
but when I put it on the tires,
what I'm going to do is I'm going to spray it on
and I'm going to scrub it in with a brush
the brush is going to help get it into those real
tight knobs where everything's just kind of in here.
I sprayed it on and now I'm just going to work it in.
I want these tires to be nice and dark black again
so we get them nice and clean.
Just a quick scrub. It doesn't take much
and you're just going to get this worked in there
just all that much better
So when you go and put your tire dressings on
on to protect these rubber, you're not
going to have to worry about a lot of these issues.
as long as you got a clean tire
it's going to be a nice consistent black.
Now as you saw
we got Garrett kin of rinsing down behind me
I don't like to let this stuff dry.
drying up will wear out your plastics it will actually
speed up the drying process on your plastics
that's one thing we don't want
so what I did is I had him rinse behind me
as I was spraying and soaping.
if you don't have somebody there to help you,
just kind of do one section at a time by yourself
do one wheel well and wheel at a time,
rinse, move on to the next section.
it kind of goes pretty fast
it goes even faster if you have a buddy to help you out
now that we got it all rinsed down,
we got the wheel wells done, the all-purpose cleaner is done,
we're going to go to our foam cannon,
soak this thing up,
hand wash it down, and get it rinsed back off again.
So I'm roughly adding 2 to 3 ounces of Moneyshot
into the bottle here- into our foam cannon
we're going to fill the rest full of water.
with our semis and stuff we use a little heavier concentrate
but with the UTVs and ATVs
you only really need about two to three ounces.
We got our microfiber mitt.
What we're going to do is pre wet this thing down
so we can start wiping everything we want to wash it all by hand
Now I'm not going to do those nasty areas
all I'm going to do is the main focus on what everybody sees.
We're going to do the body pretty much
so...here we go
Now we finished the rinse stage, while the vehicles still wet,
I like to spray the Renegade Products' Rubber and Vinyl on all the tires.
All the CV joints, the rubber boots, and all the hoses on the motor
While the stuffs all wet, the rubber and vinyl likes to settle
in really nice over the top of the water. It works really great.
so what I'm doing here is I'm just breaking it down
going completely into all the tires, doing the back sides, the treads, the top.
all four sides as much as you possibly can
any overspray you get onto your wheels; this stuff will wipe off pretty easily
when you get to that step
Once all of that is complete, what we want to do is we
want to grab our microfiber towel and dry off the rest of the vehicle.
what I do is I grab a clean microfiber,
fold it into squares so that if we do run into any dirt and debris,
what we can do is we can actually flip it over to a clean side.
. Even if the towel gets a little wet
once you get on the clean sides,
as long as you're thinning it out in the air to help finish dry it
that's what you want to do.
you just don't want to let it sit and pool up in any particular spot.
Alright, now it's time to make the decision.
Are we working on plastic, are we working on paint,
or are we working on something else?
what we're looking for is on plastics,
, you want to use a quality rubber and vinyl
That's going to condition your plastic. Bring it back to that light new finish again.
If you're working on paint and stuff, you're going to want to use a spray wax
it's going to help leave that anti-static finish
with keeping dust away and making your next clean up that much easier
so what we're going to do is we're going to spray this all down
with either a spray wax or rubber and vinyl.
our plastics if you look real close here, they're starting to dry out.
What we want to do is we want to spray it down really good
wipe it in so it leaves that nice satin finish
so it looks brand new again
and then we're going to use the spray wax on the painted areas
again, helping to make sure that it stays nice
and clean for the next time.
Get all that mud on, it'll release real easy.
So now that you saw
real close up of me wiping the seats down
If you got a good quality Rubber and Vinyl,
, you can also do your seats with it
you don't always have to switch up to just a standard leather cleaner
but conditioning your seats is number one priority
last thing you want is that fabric in your seats
deteriorating, getting dry rot, weather rot.
as you can see here, we completely finished up the entire car.
We used the all-purpose cleaner, we use a good rubber and vinyl
on all of our rubber, vinyl and plastic
all purpose cleaner was used on all those heavy
areas where there was a lot of grime
we used the Moneyshot Foam to clean the entire body
then we use the spray wax to do those plastics where it
was painted and anything that was light vinyl wrap
This thing is completed right now
and this CAN-AM Maverick X3 Turbo R is looking damn good
Just as we were finishing this thing up
the owner of Assault stopped by.
Marcelo here,
Introduce yourself to the people
Hey guys Marcelo Danze here with Assault Industries
We talked a little bit before about what you guys all did here
I think its awesome what you guys are doing
these bolt on parts are super cool they look nice
ah thanks
I think its just a cool addition to the industry
do you see this thing growing?
Absolutely, absolutely
it's been really really crazy with all these different brands coming out
and OEMs
The UTVs are getting faster, stronger, and a lot more fun to drive
and it's cool to see them starting all these race series too. I know you're involved in that as well
Yeah, yeah actually we've...we just got back from Barstow testing a
YXZ we put together with Privateer Motor Sports with
our friend Ricky. And yeah it's going to be fun for us this year
and Adrian driving a 1985 Polaris RZR
and yeah we're trying to get a lot bigger
and getting deeper into racing so it should be a fun year this year
That's cool. That's cool to see where you guys are growing to and
cool to see where you guys are headed
What do you think of my detail job?
I can't believe it! I rolled up and I saw this and it looked like a brand new car
straight out of the dealer. It's amazing
I love your guys' product and
now my car's ready to get cleaned up here
now I got to talk them to sticking around and doing it a little longer
I'm going to try at least
Alright, checking out everybody
check out my Instagram, my Facebook, YouTube
Instagram is metalpolisher3826
YouTube channel
youtube.com/evanstegermetalpolishing
Facebook's just Evan's Detail and polishing
check these guys out where you at?
Assault UTV
All on Instagram
Check them out, hit them up, buy their stuff.
Không có nhận xét nào:
Đăng nhận xét