Price Rs. 86,500
Price Rs. 86,500
-------------------------------------------
Review: Cheap CNC Machine from Banggood.com - Duration: 10:24.Dear friends welcome to another video!
I am really excited because today we are going to take a first look at this CNC machine!
It is a low-cost CNC machine which can achieve some amazing results!
Without any further delay let's get started!
Hello, guys, I am Nick and welcome to educ8s.tv a channel that is all about DIY electronics
projects.
In this channel, I share everything about the projects I build to help you develop similar
projects or inspire you to start making things because it is easy, fun and creative.
Subscribe to the channel now if you do not want to miss any future video.
In this video, I am going to share with you my experience with this new CNC machine.
I own this machine for about two months now and now and I am ready to share my opinion
about it with you.
I am an absolute beginner in CNC milling and machining.
Before receiving this machine, I had never used a machine like this so in this video
I will describe my experience as a first time user of a cheap CNC machine.
I discovered this small and low-cost CNC machine while browsing on Banggood's website.
I always wanted to add a CNC machine to my workshop and before spending a large amount
of money for a big machine I thought it would be a good idea to try a cheap one first, learn
the basics and then, moving on to a more advanced one.
That's why I decided to try it.
The machine costs around 300$ at the time I am recording this video.
Banggood was kind enough was kind enough to send me this CNC machine to try it and share
my opinion about it with you!It is one of the cheapest machines out there, and from
the images on the product page, it seems it can produce amazing results!
I almost repeated those results with the provides woods pieces and files, but unfortunately,
I accidentally destroyed the end mills because I was a complete beginner with CNC machines.
The machine comes as a kit in a big box which weights over 10Kgs!
All the parts inside were packaged very well, and it arrived intact.
There was only one important thing missing, an assembly manual!
Unfortunately, the kit comes with no printed instruction or any manual.
So, after searching online I discovered some images from Eleksmaker the creators of the
machine that describe the assembly of the machine.
It took me around 10 hours to build the machine, mostly due to the lack of a proper assembly
manual.
I also watched this video which provided a lot of information.
You are in better luck though, the creators of the machine created a new webpage with
detailed instructions about the assembly procedure a few weeks ago.
After that, I was ready to test the machine!
But where is the CD?
There was no CD inside the package.
Once again I searched the internet for software.
It took me a couple of days to understand how this machine works and what kind of software
I need.
I will try to explain the workflow from start to finish.
Let say we want to create a simple wooden Christmas ornament like this one.
First of all, we have to design it in a design software.
We are going to use Easel a free online tool today.
This tool will generate a g-code file.
Next, we are going to use another software to send this file to the machine.
We are going to use Universal-Gcode Sender today.
The machine is running its own piece of software to communicate with the computer to receive
the g-code file, control the stepper motors and the spindle.
The software the CNC machine is running is a simple Arduino sketch because the brains
of the machine are our familiar Arduino Nano!
Now that we know the workflow let's create our first wooden part.
First of all, we need to load the latest firmware to the CNC machine.
All we have to do is to upload the firmware the manufacturer of the machine offers.
In order to upload the firmware to the machine, you need to connect it to your computer.
After that, we power on the machine and install the CH340 USB to serial driver if it is not
already installed on your machine.
We open the Xloader program, and we load the Eleks-v0.9.hex file.
The machine is now configured.
You find a link to all the files in the description below.
Now let's design our part.
I tried a lot of design software, but I think the easiest way to start is to use Easel,
an online tool by Inventables, the creators of the famous X-Carve CNC machine.
This tool is free, you just have to sign up, and you are ready to use the software.
We create a new project, and we set up our machine.
The work area is around 150mm x 60mm.
We set the spindle control to automatic and the RPM to 5.000.
Now we need to import the dimensions of the piece of wood we are going to mill.
Be very precise with your measurements by using a digital caliper.
Now we can design the part.
I chose a tree icon from the examples, and I resize it to fit to the size of the wood
piece I have.
I choose the cut tab; the cut depth is going to be 5.3mm since 5.3mm is the thickness of
the wood piece.
I won't use any tabs this time so I disable this feature.
The next step is to select the end mill we are going to use.
I am going to use a 2mm end mill from this kit I bought from banggood.
You can find a link to it below.
This CNC machine comes with 2 end mills that are suitable for engraving but not for cutting
wood.
Next, we press the "Cut Settings" and we go to Custom.
I change the "Depth per pass" field to 0.2mm.
We are almost ready.
We go to Machine -> Advanced and we set the "Safety Height" at 0.3mm.
We press the Generate g-code button, and then the export-gcode button.
That's it!
Our g-code file is ready.
Now all we have to is to send this file to the CNC machine using the Universal G-Code
sender software.
We have to follow the instructions I found online in order to configure the software
for this CNC machine.
After trying a test project with the machine, I noticed that the Z-axis movement was reversed!
After searching online, I discovered the solution.
We have to reverse the Z-axis movement by software by going to Firmware Settings and
setting the parameter #3=4.
Now we open the gcode file we created before, and we press Visualize.
We can see our design and the path the end mill is going to follow.
We are only one step away.
I place the wood piece on the CNC table, and I attach it using double-sided tape.
Beneath it, I have attached another thin piece of wood to protect the end mill in case it
cuts through our 5mm wood piece due to some error.
Then we manually move the spindle and place the end mill at the bottom left corner of
our piece of wood.
The end mill must be very close to the wood, almost touching it.
Now, we have to press the reset zero button at the Universal G-Code sender software.
This is very important; we have to press the button each time we start a new project.
Finally, we are ready to press the Send button.
The machine starts working and the spindle is moving.
We can watch the path that spindle is going to follow in the Visualize window as well.
The G-code file is sent to the machine line after line, so the CNC machine must be connected
to the computer at all times.
I really like watching the CNC machine doing its thing.
It is really very cool to watch a machine cutting wood by itself.
While the CNC does its job, let me tell you about a new Android game I developed.
It is called Fact or Fiction, and it is a free Quiz Game.
It contains thousands of facts, and it supports two languages, for now, English and Greek.
If you like quiz games, I am sure you are going to enjoy this one as well.
You can download it for free from the Google Play Store.
I will provide a link to it in the description of the video below.
A few minutes later the part is ready!
We remove it from the CNC table like this, and our part is almost ready!
It looks so cool!
All it needs is a bit of sanding!
As you can see, creating complex wooden parts is not possible with no woodworking skills
at all!
We can also use this machine to create parts and objects out of Plexiglas as well or mill
our own PCBs.
I haven't tried any of this yet; I just created some wooden parts so far.
As a final thought, I really like this machine, and I think I am going to use it a lot in
the near future.
My goal is to buy a more advanced CNC machine in the future, but until then, I will experiment
with this small one, to gain experience and do some cool projects with it.
The machine is great to learn the basics of a CNC machine, but the learning curve is steep.
The assembly of the machine was frustrating because of the lack of a proper assembly manual.
Luckily, there is a better one available now so you will have a better experience than
I did.
The next disadvantage is the lack of proper software.
I had to find out by myself what software to use with the machine and how to operate
it.
I wish there was a video like this one published on Youtube when I learned the basics.
It would have saved me many days of trial and error.
One last disadvantage is the screws provided with the machine.
Especially the screws on the spindle must be very strong and sturdy to withstand the
forces and the vibrations.
Replace the provided screws with better M3 screws.
I destroyed 5 end mills and many wood pieces when using the provided screws.
You are going to find everything you need, from screws and endmills to software and instructions
in the description below.
If you overcome these problems, the results are really rewarding.
You can achieve amazing results with this machine if you learn how to use it.
I am looking forward to trying new things with the machine now that I know how to operate
it.
I will try to mill PCBs, to cut Plexiglass parts, and engrave wooden parts.
I managed to engrave this before my end mill broke.
The detail is stunning!
I can't wait to try it again with my new end mills.
I think a CNC machine is a great tool for every maker.
It opens up a whole world of new projects.
I would love to hear your opinion about this CNC machine and CNC machines in general.
Do you find it useful and are you going to invest in one in the future.
Please post your comments in the comments section below!
If this is your first time here, I would love to have you subscribed.
In this channel, I post videos about DIY projects twice a month.
I love making things, and I believe that anyone can make things, anyone can become a maker.
That's why I created this channel, to share my knowledge with the community and learn
from the community.
I hope you will join us.
I will see you in the next video!
[ Translating these subtitles? Add your name here! ]
-------------------------------------------
FNC KINGDOM in JAPAN 연습 현장 - Duration: 4:02.FNC KINGDOM in JAPAN PRACTICE
Hello, this is AOA Chan Mi
There's a lot of people gathered here in the practice room
Hello
This is SF9 Da Won
I want some screen time for myself
We're currently preparing for our Kingdom concert
Excited
FTISLAND Jong Hoon, SF9 Young Bin & Jae Yoon Practicing together
Following from the side
Preparing for their koi performance
AOA Yu Na & SF9 In Seong's We don't talk anymore
Namolla Family impersonation
First reveal!
FTISLAND Min Hwan,
N.Flying Jae Hyun & Hwe Seung
SF9 Da Won & Hwi Young
AOA Min A & Chan Mi
SF9 Zu Ho & Tae Yang's
Dirty Work with Ji Min (AOA)
Song starts
AOA Ji Min, N.Flying Seung Hyub's Uptown Funk
FNC KINGDOM in JAPAN Practice Ends
-------------------------------------------
MRvlog#4 R1 vs GSXR Roadtrip | التشنشيط في الطريق [ARABIC subtitle] - Duration: 14:47. For more infomation >> MRvlog#4 R1 vs GSXR Roadtrip | التشنشيط في الطريق [ARABIC subtitle] - Duration: 14:47.-------------------------------------------
Ho Ho Ho! Merry Christmas You Bastards! 🎅 | The Best Of LucZyn 2017 👊 🎄🍾🎆 - Duration: 1:29:29. For more infomation >> Ho Ho Ho! Merry Christmas You Bastards! 🎅 | The Best Of LucZyn 2017 👊 🎄🍾🎆 - Duration: 1:29:29.-------------------------------------------
Minecraft EN ZOR İMKANSIZ ÇÖL HAPİSHANE'DEN KAÇIŞ! - Duration: 8:02. For more infomation >> Minecraft EN ZOR İMKANSIZ ÇÖL HAPİSHANE'DEN KAÇIŞ! - Duration: 8:02.-------------------------------------------
Quem São Seus Heróis? - Duration: 10:07. For more infomation >> Quem São Seus Heróis? - Duration: 10:07.-------------------------------------------
ЭЛЕКТРОНИКА ИЗ КИТАЯ. 10 КРУТЫХ ТОВАРОВ С АЛИЭКСПРЕСС и GearBest + КОНКУРС - Duration: 6:08. For more infomation >> ЭЛЕКТРОНИКА ИЗ КИТАЯ. 10 КРУТЫХ ТОВАРОВ С АЛИЭКСПРЕСС и GearBest + КОНКУРС - Duration: 6:08.-------------------------------------------
Angel Card Reading DECEMBER 24-30 with Elizabeth Harper - Duration: 10:31.Welcome everyone to this week's angel messages my name is Elizabeth Harper and
what I'd like you to do first is place one or both of your hands over your
heart just like angel wings. Invite your angels to guide you to message one two
or three, card one two or three a message that comes from their heart to yours.
What you can also do is invite your angels to guide you to a particular
place in the video move your cursor along until intuitively feel it's time
to stop right there is an extra special message for you from your angels all
right? So we've got my big deck of cards right here. I'm just going to shuffle
them just a little bit. I've already shuffled I like to move that energy
around as well. See you can Intuit where we're gonna pick card one two or three
from in this big deck. So it feels like I actually feel like I can see it yeah
it's a green card that is Archangel Gabriel that's number one all right. So I
feel like the same thing on the bottom almost the same place but it's a yellow
card that's the Archangels card that's message two. Oh and there's one just
sticking out there but oh it's there's three cards no it's not. That is the
daily meditation cards as well. Daily message cards all right so number one
let's see what you've got. You've got Writers Group how interesting.
Look at that card now it says 'Create or join a writers group to gain inspiration
friendship and support." Now you might be thinking to yourself 'well hang on a minute.
I'm not a writer or I don't have anything to write,' but I feel that this
is about creativity. That it's a about sharing with people that that
essence of communication which is the writing it's the essence of inspiration
it's the essence of creativity yes the essence of healing I'm being told as
well because it's coming through that ears and throat and heart vibration all
together. So there's a sense of it's not necessarily about writing it could also
be about just connecting to people just connecting in a tribe connecting with
those people that have the same mindset as you the same energy as you the same
intention as you etc. The Writers' group can also be because it's the end of the
year I back from contact this because I can hear what's coming through at the
same time. It it can also be about writing your desires for next year, your
wishes for next year, your plans, your goals etc. and getting together with a
group of people can really help you solidify those goals. It can help you to
get ideas from other people as well and there's a power in groups that you don't
necessarily have by yourself. So there's also a sense of commitment as well as
you join that group. So as I'm looking at this I'm seeing this beautiful this
lovely orange top you see that? And that golden vibration there it's almost
like an orange flame isn't it? That's coming up that's that sacral center and
that sacral Center is about creativity and inspiration and I feel there as well
you know there are it's a building that's there's a sense of building
blocks coming up here. So whatever this is about it may be that you start out
having an idea and you want to join a group but that group is going to expand
into something else it's building a solid foundation for you for your
creativity for your intuition for your for your inspiration and growth comes
from that as well because it's fertile it's that sacral Center energy that's
coming in. Oh I love that turned out to be something pretty good didn't it?
All right so our second card is, "You Know What to Do" don't you just hate it when
somebody says that to you? You know you don't need to be told. You know what to
do this is Archangel Uriel, "Trust your inner knowledge and act upon it without
delay." Now Uriel also has this kind of orange color golden energy and is
holding a light. When you have this light there is this vibration that is about
knowledge, its about understanding, it's about getting information. You you
throw light on a subject so that you can expand on it so you can understand it. So
with this I feel that your angels are just saying you know if you're having
problems at the moment, if you're trying to figure something out and thinking
about this for myself as well you know we teach what we most need to learn
right? Every message is also for me. So when I look at this and sense this and feel
into it it's saying that the question that you're asking at this moment this
big question that you may have right now you know the answer to it. You already
know the answer to it. Just feel into it just get a sense of what it feels like
Feel it in your body. Feel it in your heart. Feel it in your
soul. What does it feel like? And then go with that feeling. You can call on
Archangel Uriel to support you and help you with that energy and then with the
light it's opening yourself up to the light and maybe meditating on that
question that you have the big question that you have at this moment. Meditate on
it, bring a light into it and just allow that answer the answer to come in. I was
thinking about this this morning interestingly that you know when you
meditate you get to this place of Nirvana when you get to this amazing
place where there's all knowledge you no longer have any questions because you
have all the answers right there and it's like your question doesn't exist
anymore. So you have access to all knowledge it's just a
case of opening yourself up to receive. Alright our
third card is, "Release and Surrender" Oh my so this is violet and yellow these
are opposite each other on the color wheel so the violet is that Crown Chakra
the yellow is the solar plexus. Solar plexus can hold the energy of fear it
can hold this energy of power as well so with the cleansing what happens is you
release that fear. You release the pain. You release that maybe need for
something that you don't need anymore surrender to the energy and you become
much more powerful in that as well. So it says, "We shower you with blessings of our
radiant love. Open your arms and release the challenges that you've held tightly
gripped within your hands. Open your hands, arms and heart to our love and
assistance." That's so beautiful that's such a beautiful card as well and it
almost makes me think of the Statue of Liberty you know? So there's a sense of
freedom and liberation that comes from this I noticed that she I don't know if you
can see that her hands have rays of light coming out as well so theres healing
that comes from this. You know when we cleanse, when we release, when we let go
then all the cells of your being can come into this beautiful place of light.
I love that and with that violet and yellow energy again there is a sense of
the violet is change. Violet is transformation and that yellow is the
cleansing vibration but the two energies coming together also say that maybe it's
time for you to come out that's that yellow energy. The violet is you know a
little bit hidden in the violet and then the yellow is saying
come on out to play. So the violet is moving up and that yellow is coming
right out. So you are going to be seen it's time for you to be seen it's time
for you to let go surrender and shine your light and come into your power. Okay
that's it for this week's angel messages I hope you enjoyed them
now do make sure that you check out my VIP waitlist for my new membership site
it's coming up very soon and if you are on the waitlist you will be the first to
know but you will also be getting some special deals by being on that waitlist.
I also have of course of course an Archangel Gabriel prayer to share with you
Archangel Gabriel is that beautiful vibration of creativity and inspiration
perfect for this time of year. If you enjoyed this video please give it a
thumbs up. Let me know in the comments below if the messages resonated for you
and of course if they did please share this video with your friends I'm sure
they would love to have an angel message. I will see you next week
Merry Christmas to you, Happy Holidays and Angel Blessings. Bye!
-------------------------------------------
☑️ MİNECRAFT'TA SLİME DÜNYASI PORTALI - Duration: 12:09. For more infomation >> ☑️ MİNECRAFT'TA SLİME DÜNYASI PORTALI - Duration: 12:09.-------------------------------------------
Rafinha | "Pique is the best penalty taker!" | Barcelona teammates - Duration: 2:08. For more infomation >> Rafinha | "Pique is the best penalty taker!" | Barcelona teammates - Duration: 2:08.-------------------------------------------
Indoor Playground with balls Family fun Play Area for children Nursery Rhymes song for kids - Duration: 3:38.Indoor Playground with balls Family fun Play Area for children Nursery Rhymes song for kids
-------------------------------------------
【MUKBANG】 Exciting Food!!! Baby Back Ribs With Macaroni And Cheese [4306kcal] [CC Available] - Duration: 4:24.Hello it's Kinoshita Yuka (English subs by ~Aphexx~) (Change font size, color, transparency via menu settings)
so today! tadaa, I'll be eating baby back ribs today
This is an American dish It's bone in pork meat
~ back ribs ~
And this is some macaroni and cheese
Such huge and amazing looking portions This weighs 1.2 kilograms itadakimasu
A nice char to it And it looks like this on the flip side with a bone still in it
Its flavored really nicely With many spices
And the meat surrounding the bone taste so yummy
I just love munching down on these bones And it also has such a nice look to it
That it would be perfect for any Christmas parties Or gatherings
It came with fries as well
A perfect match
I think there's 14 pieces here (#FakeNews there are 15)
And this is some mac and cheese
It's such a simple pairing melting of macaroni With cheese its so yummy
The baked Cheese is very tasty
And cola is a perfect accompaniment
Bone-in meat has such a fancy feel to it
yummy
It's also got a wild and Savage feel to it
(be a super fan and share Yuka's vids on all your socials)
I wonder why it is that meat surrounding the bone Tastes this wonderful
Since it's common practice that we extract Flavor from Bones
Perhaps some of the flavors from the bones Are seeping into the meat itself
I also love biting into this like a Savage
I'm also in love with ripping the meat that clings to the bone off with my teeth
That part of the meat is especially yummy
This would probably be super yummy eaten at a Barbecue
Mac and cheese is so yummy
I totes want more fast food shops Here in Japan to carry this
They even added corn in this
The added sweetness from the corn Gives it an added layer of yumminess
Last one
All done gochisosamadeshita
The baby back ribs were very yummy
I totally love that feeling of ripping meat from the bone
And the way it looked is amazing as well I believe it would be perfectly suited for parties
Christmas is coming up soon And it would be nice for times like that
It would probably be extra yummy over in America I totally want to eat barbecue
It was so yummy want you all please give it a try as well
And as always thank you for watching this video if there is Anything that you'd like me to do or eat please tell me
In the comment section below if you like this video please hit The like And subscribe buttons BAI BAI
-------------------------------------------
Покупка транспондера на М4 «Дон»; стоянка в Лосево - Duration: 25:49. For more infomation >> Покупка транспондера на М4 «Дон»; стоянка в Лосево - Duration: 25:49.-------------------------------------------
2048 년에서 온 시간 여행자는 외계인이 2018 년에 지구를 침공할 것이라고 경고 - Duration: 2:20. For more infomation >> 2048 년에서 온 시간 여행자는 외계인이 2018 년에 지구를 침공할 것이라고 경고 - Duration: 2:20.-------------------------------------------
《戰地風雲:惡名昭彰3》越戰設定! ► 會是2018年的續作?還是謠言? - Duration: 3:09. For more infomation >> 《戰地風雲:惡名昭彰3》越戰設定! ► 會是2018年的續作?還是謠言? - Duration: 3:09.-------------------------------------------
북한 김정은 최고사령관 추대 3년…"수령결사옹위" - Duration: 2:43. For more infomation >> 북한 김정은 최고사령관 추대 3년…"수령결사옹위" - Duration: 2:43.-------------------------------------------
The BEST Strategy To Invest In Cryptocurrency! - Duration: 1:38:17.Best Crypto Strategy!
-------------------------------------------
Khoảnh khắc kỳ diệu - TỔNG HỢP TUẦN #66 - Phim hoạt hình - Phim Hay ► Phim Hoạt Hình Hay Nhất 2018 - Duration: 32:59. For more infomation >> Khoảnh khắc kỳ diệu - TỔNG HỢP TUẦN #66 - Phim hoạt hình - Phim Hay ► Phim Hoạt Hình Hay Nhất 2018 - Duration: 32:59.-------------------------------------------
전시용 랩핑뽑기!? 리터치 기술로 뽑아보는 옷갈아입히기 피카츄!? 퀄리티가 진짜 좋은 일본정품! 지우개가 엄청많은 건대 인형 뽑기 (2탄) #69 ♡더비러비츄♡ - Duration: 12:03. For more infomation >> 전시용 랩핑뽑기!? 리터치 기술로 뽑아보는 옷갈아입히기 피카츄!? 퀄리티가 진짜 좋은 일본정품! 지우개가 엄청많은 건대 인형 뽑기 (2탄) #69 ♡더비러비츄♡ - Duration: 12:03.-------------------------------------------
How smart is today's artificial intelligence? [UPDATED B] - Duration: 1:00. For more infomation >> How smart is today's artificial intelligence? [UPDATED B] - Duration: 1:00.-------------------------------------------
ÖZYANK DİSS -(Diss rap Track official music video) -Muhammet Özyanık - Duration: 2:58. For more infomation >> ÖZYANK DİSS -(Diss rap Track official music video) -Muhammet Özyanık - Duration: 2:58.-------------------------------------------
《戰地風雲:惡名昭彰3》越戰設定! ► 會是2018年的續作?還是謠言? - Duration: 3:09. For more infomation >> 《戰地風雲:惡名昭彰3》越戰設定! ► 會是2018年的續作?還是謠言? - Duration: 3:09.-------------------------------------------
New Honda Pridor 100 2018 Price in Pakistan Specs Rs. 86,500 Video ebike.pk - Duration: 2:21.Price Rs. 86,500
Price Rs. 86,500
-------------------------------------------
How Your WiFi Will be Hacked? - Duration: 2:23.hello friends in this video I am going to show you all how your Wi-Fi will be
hacked or how to hack Wi-Fi this video is only for knowledge purpose don't
misuse this technique and it's completely illegal so for this we need
to download two applications I have given a direct links in the description
below do check now go to settings and go to about phone and select status and
long press on the serial number we need to copy the serial number here after
this close this window and open ES File Explorer select internal storage and
click here on three dots selecting new and now select file here give filename
as a serial number simply paste the serial number here which we already
copied and press ok yes now open V PS VP a tester application click on agree then
icon here synchronize button it will show us all active nearby Wi-Fi networks
select the Wi-Fi you want to connect with then click OK now here select an
option called connect automatic pin within seconds of time your phone will
be connected with selected Wi-Fi network yes here no need to root your device but
if your phone is rooted then you can see the password if not you can only connect
so this is how people will hack you a Wi-Fi network be secure a Wi-Fi network
I'll show you in my next video how to protect to your Wi-Fi network so hope
this video is useful to you all who subscribe this channel for more updates
like this click on Bell icon to get notified about my videos thanks for
watching we'll see you in my next video
-------------------------------------------
5 Exercises for flat stomach | How to reduce belly fat at home with simple exercises - Duration: 4:53.5 Stomach Exercises You Can Do at Home for a Flat Tummy.
Belly fat not only looks bad, but it is also a storehouse of many internal problems such
as diabetes, heart diseases and more.
Belly fat or visceral fat is fat that
accumulates between your organs like stomach and intestines.
In addition to conscious eating, you need to do have an active lifestyle.
Take out 30 minutes from your busy schedule every day to walk, play a sport, swim or indulge
in any activity that makes you move around.
Burning calories is key to reducing abdominal fat.
Finally, to convert the flab into fab, you need to target this specific
area to get rid of the fat and tone the muscles.
Here are 5 stomach exercises that may help you to be fit.
1.
Planks.
One of the best exercises that you can do for your core is a plank.
It helps to improve your posture by building isometric strength.
Planks tone and strengthen the
muscles of the abdominal region and support the spine.
Go down on the floor in the press up position.
Put the weight on the forearms while bending your elbows.
Form a straight line through your body from shoulders to
ankle, suck your belly button into the spine and hold on the position for some time and
relax.
In the beginning you may be able to hold the pose only for 8-10 seconds.
Don't worry, this will increase as you keep doing this.
Repeat the same five-six times.
2.
Side Plank.
It helps to maintain proper posture and reduce stress on the spine and hence helps to prevent
back issues.
Strengthens the abdominal and the back muscles and can be
practiced anytime but being consistent is the key here.
Extend your legs and lie on your right side such that your feet and hips rest on the floor
on top of each other.
Place your right elbow under your shoulder, while
contracting your core muscles lift your hips and knees off the floor.
Hold on to the position for few seconds and come back to the normal position.
Repeat the same on
the other side.
3.
Sit Ups.
Strengthening the abdominal muscles is the advantage of this exercise.
Start by lying flat on a floor mat, face up.
You can put your arms behind your head or cross
them in front of your torso.
Now, keep your lower body still and move your upper body towards your knees.
Take a deep breath and exhale as you go up.
Inhale as you
bring your body back to the mat.
Make sure your arms are not pushing against your head and neck too much.
You are supposed to use the abdominal muscles to move up and
down, so make sure your neck is not strained during this exercise.
Do this 10-15 times.
4.
Russian Twist.
Sit on a floor mat and bend your knees slightly, your heels should be flat on the mat.
Now, start leaning back till you feel that the muscles of the abdomen are
engaged.
You could also come to this position by lying flat on the floor first.
Now, bend your knees and raising your upper body towards the knees.
You would be
creating an imaginary V-shape with your torso and your thighs forming the arms of the V.
Hold your arms straight in front of your face.
Slowly twist from one side to
the other.
Make sure you are moving with the strength of your abdominal muscles and not your arms
alone.
As you get better at this exercise, you could try holding a
ball or weights when moving from side to side.
5.
Crunches.
Crunches are considered as the fastest way to burn the belly fat and are very easy to
do at home without any equipment.
They tend to build endurance and power in your
belly muscles.
Lie down flat on the floor, place your hand behind your head, bend your knees and place
your feet flat on the ground.
Lift your upper body off the
floor, exhale as you go up and inhale as you come down.
Repeat, for few minutes and relax.
-------------------------------------------
Nât - S'envoler (Clip officiel) - Duration: 2:59. For more infomation >> Nât - S'envoler (Clip officiel) - Duration: 2:59.-------------------------------------------
mac tips#03:How To add new, delete and Switch Language On Mac Keyboard 2017 - 2018 New & Only Method - Duration: 2:30.Hello everyone, I'm SernHao! Welcome to my channel!
What we going to study today is:
How to Add new and switching input language in MacBook.
I believe you might like me,
Encounter a situation to be entered in different languages.
Such as email or google search certain words.
You knew. . . : P
Here I will share with you
How to Add and fast switching language input in MacBook
Prior to this, please allow me to play a little advertising.
SernHao Tv will always be updated on
Practical MacBook's tips.
If you do not want to miss the information in this regard,
Please remember to subscribe to SernHao Tv.
After the subscription, click on the small bell next to it.
Then you will be noticed when the latest video release.
(1) add language input source method
First we go to the left hand side, mac logo here, click.
Select System Preferences. . .
Select Keyboard.
Then select Input Sources.
Here I've added three language input method.
The first is the traditional Chinese Pinyin; second Simplified Chinese Pinyin;
The third is English.
Now I going to add a new language input method.
Click "+."
Select (Language) input method you want.
I chose Japanese. Add.
This is (language) Input I just added up.
This is (language) Input I just added up.
In the upper right corner is the "menu" there.
Click on this, and then you can see the other input method.
(2) delete the language input method.
As long as you choose the language input source you do not want it anymore,
Then click on the lower left corner "-" on it.
(3) switching the input method language.
There are two ways.
(3.1) the switching input language - Slow
Can go to the upper right corner, click.
Then select the input method we want.
(3.2) to switch the language input - Fast
Or shortcut key is:
control + space
This time, you can not let go of the control key.
Then click on the "space key." To select the input method you want.
That is all I want to share with you about
the useful tips of MacBook and macOS.
If you think this sharing is helpful, then,
Please help me to click a Like.
Then, also share it to a friend who may need.
I also hope you to tell me in the comments below,
Regarding your experiences and tips.
I am SernHao. See you in my next video bye ~
-------------------------------------------
🔥「十億觀看俱樂部」榜眼與榜首相差十億,YouTube觀看次數超十億的音樂MV 數據統計日期:2017/12/20 The Billion View Club - Duration: 20:02. For more infomation >> 🔥「十億觀看俱樂部」榜眼與榜首相差十億,YouTube觀看次數超十億的音樂MV 數據統計日期:2017/12/20 The Billion View Club - Duration: 20:02.-------------------------------------------
Train Like A Warrior -Coming ... For more infomation >> Train Like A Warrior -Coming ...-------------------------------------------
For more infomation >> Train Like A Warrior -Coming ...-------------------------------------------
Men's Daily Makeup【Lirm】|Eng Sub - Duration: 10:48.I have the urge to be seen as cute.
Mackee magic marker sold anywhere.
By drawing a line over the double eyelid,
the eyelid will be more clear.
Hello, I'm Lirm.
I am usually doing makeup and singing on Twitter and Twit Casting.
On the 26th of December, my very first solo live will be held.
The details of the live will be explained after the makeup.
I will do the makeup first.
For the circle lens.
The drawings I do on Twitter are,
characters with pink hair and blue eyes,
so to align that I use blue color lens.
I started out by doing the hair in pink,
but I got bored with it so I am doing it blond now
so I am matching it.
For the eyelid glue, I am using AB eye liquid.
After one year that I had started makeup,
I found it in a store.
The adhesive level is quite excellent compared to other glue,
and it dries really fast.
I use it since I can instantly make double eyelid.
The base CC cream.
I originally substituted with BB cream,
but I found this when I was shopping,
and when I took it in my hand, I found it really good.
And I started using it.
The concealer is KATE stick concealer in light beige color.
KATE products are pretty useful compared to the price.
I feel it covers quite well.
It's stick concealer so you don't have to worry about fingers getting dirty.
Since I am a guy, my beard and my eyebrows are thicker than girls.
So I am covering up the beard
My smile lines tend to stick out a lot,
so I apply it there as well to show some 3D effect.
Adding to the eyebrow will make the eyes have strong feature so I use it there.
The foundation is essential mineral foundation.
The color natural ocre.
I found it while shopping and used the tester.
And I am using it now.
It's same as the CC cream before,
it doesn't give that really thick makeup look so I use it.
The powder is SANA excel lucent powder.
Shere beige color.
As you can see, it's quite a big size.
It's value for money,
and it also has some glitter in it,
so it gives a shine to the skin so I use it.
When I add powder to my skin,
I wouldn't puff it on a lot,
but holding it down and letting it blend in will give less effect to the skin
and since I believe the skin is essential for the ladies,
so I hope you can use this tip.
The blush is Angel Heart Soft Powder Cheeks.
Color no.1 Dolly Pink.
The Angel Heart eyeshadow and blush originally gives great color,
and I can buy it cheap so I use it.
The normal way to use the blush is use it on the cheeks,
but I add it directly to the eye bags.
By adding it to the high position, I believe it gives you a different character than others.
That's where I use it.
For the eye bags, I'm using BIBO eyeful eyebrow in amber brown.
I will be using this on the eyebrows,
Since it's a brown without much yellow color in it
so I believe it's easy to draw the shadows.
This one like the one before sells at a fairly low price,
so try it out.
The one I'm using on the plump part of the eye bags,
KATE metal glamour eye shadow
brown two.
The lightest color to be added after the shadow is on the eye bags,
overlaying on top.
After using this, using Angel Heart in color red.
This is used for the eye bags, from the outer corner to the middle of the eyes
using the red color as a gradation.
Great color.
By adding red color to the eye bags
makes it look more plum when far away than the white color.
For the nose shadow
KATE designing eyebrow 3D
Using the light brown color.
I am mixing the lightest color and the middle color and using it.
Drawing the nose shadow from the middle of the eyes down to the tip of the nose
Once the shadow is done,
KATE slim create powder N
This is a highlighter.
Putting this in where the nose shadow is added
to make the nose look longer.
This is where I'm using it.
KATE brown eyeliner is used on the double eyelid line.
By adding a line over the double eyelid,
It makes it more clear.
Next is KATE metal glamour eyes eyeshadow.
By using the dark color of this,
before drawing the eye line, drawing the shadow of the bottom eyelid.
When doing it, I'm using this thing sold at 100 yen store.
It's a cotton swab for makeup, which the pointed side is used for detailed parts.
By adding the shadow with the eyeshadow before adding the eye line,
this will give more of the 3D look.
The eyeliner is dark brown color from Love Liner.
When drawing the eyeliner,
I think a lot of people draw the line while closing their eyes,
but when I do it with eyes closed, it looks really crooked,
so I open my eyes really wide when pulling it.
Since I want the outer corner to be really droopy,
so making the lines droopy and connecting with the bottom line.
The eyebrows are done with the same one used on the eye bags.
BIBO eyeful eyebrow in amber brown color.
Starting this from the outer corner to just before hitting the inner corner
After that I'm using this which I used on the nose shadow.
Using the KATE designing eyebrow powder
blending in the inner corner at the end.
For the shape of the eyebrows, I'm not making the top part like a mountain
Since I have a very strong urge to make the eyes droopy,
so I'm making the eyes to be droopy like the eyes.
The one I'm using after creating the eyebrows,
KATE 3D eyebrow color natural ash.
This is the same as the BIBO eyebrow pen,
by using the ash color which doesn't have much yellow in it,
and creating it naturally.
The one I'm using for creating mole is,
this Mackee magic marker which you can find anywhere.
I get asked whether it come off with water or makeup remover,
but it comes off instantly with warm water.
Whether it has effect on my skin or not, I have no idea at all,
but since the tip is round and easy to use, I like to use it.
The position to draw the mole is,
adding two under the eye bag on the right side,
and one under the left side of the lips.
This will first make the eye bag look really cute
and will give a sexy taste under the lips.
The lipstick is Media pink colored lipstick.
Since the image color is pink,
so I am using quite a dark pink color.
The next is Karismacg flower tint.
It says it changes color with temperature,
It give a natural finish so I use it.
The lip brush I am using right now,
I went and bought this yesterday.
It said it's really easy to use.
And I bought it.
Quite plain.
After adding all the lipstick, I took some off with the tissue paper.
Keep in mind it's a makeup for men,
so I have the motto of not making it too dark, so I use the tissue.
For the hair arrangement, I am using the hair iron.
I am using this brand called ADST.
Since I was a beautician before,
so I am good at doing hair,
so I did it.
I did a little bit of naturally curly hair this time.
Since I want my face smaller,
so I am curling it inward with the straightening iron,
and the rest in waves.
When I want the hair to look in volume,
some people use the hair iron in many parts,
but when you use the wax at the end,
if you spread it out, it will definitely give some volume.
So the iron should not give so much heat
so dividing the hair into three parts.
And finishing the hair in three times.
How was it?
I had done the normal makeup,
but since I'll be going outside it's toned down a lot.
And since I have the urge to be looked as cute,
so making the eyes and eyebrows droopy
or adding the pink color.
If you like, please try it out.
My CD will be released soon.
This will be my very first single CD.
The name of the song is Miraizora.
As a special bonus, it has my original message in it,
and if you buy it at this limited event,
you have a chance to take an instant photo with me,
so please come and meet me at the event.
There will be more videos of me coming up soon,
so please subscribe to the channel and enjoy it.
Bye bye!
-------------------------------------------
For more infomation >> Men's Daily Makeup【Lirm】|Eng Sub - Duration: 10:48.-------------------------------------------
MERRY CHRISTMAS! Hark the Herald Angels Sing | Shopkins Christmas song for kids - Duration: 1:53.Hark! the herald angels sing Glory to the newborn King
Peace on earth, and mercy mild God and sinners reconciled
Joyful, all ye nations, rise Join the triumph of the skies
With th' angelic host proclaim Christ is born in Bethlehem
Har, the herald angels sing Glory to the newborn King
Hail, the heav'n-born Prince of peace Hail! the Son of Righteousness
Light and life to all he brings Risen with healing in his wings
Mild he lays his glory by Born that man no more may die
Born to raise the some of earth Born to give them second birth
Hark! the herald angels sing Glory to the newborn King
-------------------------------------------
For more infomation >> MERRY CHRISTMAS! Hark the Herald Angels Sing | Shopkins Christmas song for kids - Duration: 1:53.-------------------------------------------
LEARN TO MAKE LACK - IF THERE IS TOO MANY PAIN, IT IS TIME TO SAY BYE! - Duration: 4:52.Often we humans have a giant
hard to say goodbye
due to this. we stay connected to people and projects
no longer are worth, and today
the only cause pain and anguish
It's time to pack up and go
when the words do not convince,
when there are more fights than fondling
when the pleasantries are exchanged for favors,
when there is only monologues,
when out alone is more important than going out to eat
a pizza together, when there are more obligations than pleasures,
when there is complicity and friendship.
In life, I wanted to be a person who believed
in second chances in pardons in new possibilities
without having to measure very.
I Wish I had more innocence. I wanted to believe more.
I wanted to be less selfish
and less foot.
I wanted to have purity of heart as children.
I wanted to believe in promises. I wanted,
but then it takes a slap in the face, is very
you do not embitter unlikely, if only a little.
I've tried many times to understand,
why so much humiliation
and no response fueled my pain
The disillusionment that embraces us, bitter
and let us poison by unbelief
to live a new love
and have someone new in our lives.
No one is equal and everyone mind
if only a little, if only for a moment
or once in a lifetime.
less vulnerable to be happier
If redo and complete Falls
that love is what moves your life
Learn to live without idolatry novels
in a relationship, respect
It should be above any other attitude
or even up care.
Who respects is loyal,
You know what you want
and does not handle their feelings.
typically take a while to learn fret is fret
that people are people and cowards
They are always cowards.
It is not easy to assume the errors, count the sins and admit mistakes
however it is necessary to be more human and less liar.
People cheat, lie and
make mistakes,
But living a facade relationship
or submission is a lot of lack of self-love.
It's not easy to be strong, take a
second chance,
forgive or even start,
all this is almost impossible, but it is necessary
when love speaks louder and shouts for someone new.
It is very difficult for an endpoint,
finished a year relationship, raise your head and then,
all this takes much longer
for balance,
but there is always a new horizon,
even if you does not see the way
We will spend days and sad days,
crying will be the best lullaby
and the longing will tighten when the memories are back
his or her
is time to and from goodbye
when there is coldness, indifference and storms.
It's time to be alone
when there is no understanding, when the
hug is forgotten when the kiss ceases to exist
and when the heart aches distances. together even
If there is too much pain, it's time to say goodbye.
Maybe he or she is perfect,
ideal for marriage being a parent
but it was not made for you.
Maybe he's your dream, but you are not his dream.
or her
Perhaps
she has discovered what it takes.
enjoy life and live other romances
Maybe she just decided to go around to
knowing someone else to be the same fret.
It's nobody's fault, not yours, not his or hers.
Are the directions of life
that sometimes separate the
to meet in another heart.
Survive and win the setbacks that appeared
while you think you are in love with someone
but definitely
do not believe in unstable relationships
and no deliveries.
If there is no loyalty,
You can not survive a lifetime,
because love has to be transparent
and he does not survive amid the indifference.
think about it !
Kick the bucket and be happy!
-------------------------------------------
For more infomation >> LEARN TO MAKE LACK - IF THERE IS TOO MANY PAIN, IT IS TIME TO SAY BYE! - Duration: 4:52.-------------------------------------------
The industry of fake - (VPRO documentary - 2014) - Duration: 44:47. For more infomation >> The industry of fake - (VPRO documentary - 2014) - Duration: 44:47.-------------------------------------------
For more infomation >> The industry of fake - (VPRO documentary - 2014) - Duration: 44:47.-------------------------------------------
Line Renaud éprouvée par la disparition de Johnny Hallyday remercie tous - Duration: 2:40. For more infomation >> Line Renaud éprouvée par la disparition de Johnny Hallyday remercie tous - Duration: 2:40.-------------------------------------------
For more infomation >> Line Renaud éprouvée par la disparition de Johnny Hallyday remercie tous - Duration: 2:40.-------------------------------------------
Le vase de Soissons : quand Clovis rompt avec la tradition franque - Duration: 3:22. For more infomation >> Le vase de Soissons : quand Clovis rompt avec la tradition franque - Duration: 3:22.-------------------------------------------
For more infomation >> Le vase de Soissons : quand Clovis rompt avec la tradition franque - Duration: 3:22.-------------------------------------------
Aaron Sorkin's Molly's Game For more infomation >> Aaron Sorkin's Molly's Game-------------------------------------------
龙珠,新作设定各种崩坏,打败沙鲁的悟饭被小杂兵重伤 - Duration: 2:15. For more infomation >> 龙珠,新作设定各种崩坏,打败沙鲁的悟饭被小杂兵重伤 - Duration: 2:15.-------------------------------------------
Что такое навязанная услуга? / Консультация юриста / МОИ ПРАВА - Duration: 1:02. For more infomation >> Что такое навязанная услуга? / Консультация юриста / МОИ ПРАВА - Duration: 1:02.-------------------------------------------
Nât - S'envoler (Clip officiel) - Duration: 2:59. For more infomation >> Nât - S'envoler (Clip officiel) - Duration: 2:59.-------------------------------------------
Промо Каналу Gaster Let's Play Tanks - Duration: 1:02. For more infomation >> Промо Каналу Gaster Let's Play Tanks - Duration: 1:02.-------------------------------------------
How Your WiFi Will be Hacked? - Duration: 2:23.hello friends in this video I am going to show you all how your Wi-Fi will be
hacked or how to hack Wi-Fi this video is only for knowledge purpose don't
misuse this technique and it's completely illegal so for this we need
to download two applications I have given a direct links in the description
below do check now go to settings and go to about phone and select status and
long press on the serial number we need to copy the serial number here after
this close this window and open ES File Explorer select internal storage and
click here on three dots selecting new and now select file here give filename
as a serial number simply paste the serial number here which we already
copied and press ok yes now open V PS VP a tester application click on agree then
icon here synchronize button it will show us all active nearby Wi-Fi networks
select the Wi-Fi you want to connect with then click OK now here select an
option called connect automatic pin within seconds of time your phone will
be connected with selected Wi-Fi network yes here no need to root your device but
if your phone is rooted then you can see the password if not you can only connect
so this is how people will hack you a Wi-Fi network be secure a Wi-Fi network
I'll show you in my next video how to protect to your Wi-Fi network so hope
this video is useful to you all who subscribe this channel for more updates
like this click on Bell icon to get notified about my videos thanks for
watching we'll see you in my next video
-------------------------------------------
【MUKBANG】 Exciting Food!!! Baby Back Ribs With Macaroni And Cheese [4306kcal] [CC Available] - Duration: 4:24.Hello it's Kinoshita Yuka (English subs by ~Aphexx~) (Change font size, color, transparency via menu settings)
so today! tadaa, I'll be eating baby back ribs today
This is an American dish It's bone in pork meat
~ back ribs ~
And this is some macaroni and cheese
Such huge and amazing looking portions This weighs 1.2 kilograms itadakimasu
A nice char to it And it looks like this on the flip side with a bone still in it
Its flavored really nicely With many spices
And the meat surrounding the bone taste so yummy
I just love munching down on these bones And it also has such a nice look to it
That it would be perfect for any Christmas parties Or gatherings
It came with fries as well
A perfect match
I think there's 14 pieces here (#FakeNews there are 15)
And this is some mac and cheese
It's such a simple pairing melting of macaroni With cheese its so yummy
The baked Cheese is very tasty
And cola is a perfect accompaniment
Bone-in meat has such a fancy feel to it
yummy
It's also got a wild and Savage feel to it
(be a super fan and share Yuka's vids on all your socials)
I wonder why it is that meat surrounding the bone Tastes this wonderful
Since it's common practice that we extract Flavor from Bones
Perhaps some of the flavors from the bones Are seeping into the meat itself
I also love biting into this like a Savage
I'm also in love with ripping the meat that clings to the bone off with my teeth
That part of the meat is especially yummy
This would probably be super yummy eaten at a Barbecue
Mac and cheese is so yummy
I totes want more fast food shops Here in Japan to carry this
They even added corn in this
The added sweetness from the corn Gives it an added layer of yumminess
Last one
All done gochisosamadeshita
The baby back ribs were very yummy
I totally love that feeling of ripping meat from the bone
And the way it looked is amazing as well I believe it would be perfectly suited for parties
Christmas is coming up soon And it would be nice for times like that
It would probably be extra yummy over in America I totally want to eat barbecue
It was so yummy want you all please give it a try as well
And as always thank you for watching this video if there is Anything that you'd like me to do or eat please tell me
In the comment section below if you like this video please hit The like And subscribe buttons BAI BAI
-------------------------------------------
Healthy No-Bake Energy Energy Ball recipes in Tamil - Duration: 2:54.Healthy No-Bake Energy Energy Ball recipes in Tamil
-------------------------------------------
Le vase de Soissons : quand Clovis rompt avec la tradition franque - Duration: 3:22. For more infomation >> Le vase de Soissons : quand Clovis rompt avec la tradition franque - Duration: 3:22.-------------------------------------------
mac tips#03:How To add new, delete and Switch Language On Mac Keyboard 2017 - 2018 New & Only Method - Duration: 2:30.Hello everyone, I'm SernHao! Welcome to my channel!
What we going to study today is:
How to Add new and switching input language in MacBook.
I believe you might like me,
Encounter a situation to be entered in different languages.
Such as email or google search certain words.
You knew. . . : P
Here I will share with you
How to Add and fast switching language input in MacBook
Prior to this, please allow me to play a little advertising.
SernHao Tv will always be updated on
Practical MacBook's tips.
If you do not want to miss the information in this regard,
Please remember to subscribe to SernHao Tv.
After the subscription, click on the small bell next to it.
Then you will be noticed when the latest video release.
(1) add language input source method
First we go to the left hand side, mac logo here, click.
Select System Preferences. . .
Select Keyboard.
Then select Input Sources.
Here I've added three language input method.
The first is the traditional Chinese Pinyin; second Simplified Chinese Pinyin;
The third is English.
Now I going to add a new language input method.
Click "+."
Select (Language) input method you want.
I chose Japanese. Add.
This is (language) Input I just added up.
This is (language) Input I just added up.
In the upper right corner is the "menu" there.
Click on this, and then you can see the other input method.
(2) delete the language input method.
As long as you choose the language input source you do not want it anymore,
Then click on the lower left corner "-" on it.
(3) switching the input method language.
There are two ways.
(3.1) the switching input language - Slow
Can go to the upper right corner, click.
Then select the input method we want.
(3.2) to switch the language input - Fast
Or shortcut key is:
control + space
This time, you can not let go of the control key.
Then click on the "space key." To select the input method you want.
That is all I want to share with you about
the useful tips of MacBook and macOS.
If you think this sharing is helpful, then,
Please help me to click a Like.
Then, also share it to a friend who may need.
I also hope you to tell me in the comments below,
Regarding your experiences and tips.
I am SernHao. See you in my next video bye ~
Không có nhận xét nào:
Đăng nhận xét