Hello
Welcome another day to my channel. I'm Chimi
And she's Arana and we're going to fix her legs
We are going to fic her legs with wire.
it's very easy, only what we need is wire
and some instructions
a "wiring"
it's basically put a wire inside
to improve the poseabillity
It's the third reinforcement to strung
hot glue, and wire.
It's the desperate way to keep the doll straight
Also you can put it on arms
And it works to simple jointed body or double.
This one is simple and easier
inside video!
[MATERIALS]
We'll need
Wire
I picked nº6 wide
Hot glue gun
Pliers
the doll
and patience :D
At the beginning we have the doll
the legs
that doens't work well
look!
This is usually what happens with lillicat
Some of you will feel identified
The doll doesn't have middle point
here
or here...
So, we are gonna
improve
the poseabillity
with wire
ok
We need to measure
the distance between
top to bottom leg
We need to cover the entire leg.
It doesn't matter if it's shorten
or longer
Well, it shouln't be longer
It's very easy to make
just you have to do it
Cut here
[it's hard to cut]
The important thing is that cover all the distance.
Just like this
At the same with another one
We can measure like the previous
or like this.
[this is harder to cut xD]
It's hard!!
Next step.
Now with the hot glue.
the only silicon bars I have are with glitter
and I have to use up xD
The other side
Just put a bit, don't need to much.
If you don't have bulk wire
you can use it double.
Use two wire bars for every leg.
Ouch! I burned!
Once, silicon is dry
insert the wire for the leg
bow the leg
and we have this hole.
put inside the wire completely.
And now we bend
and insert to the other leg piece.
les't see it's works
OK!
We have the string
and the wire inside
Fits perfectly
Here push it down a bit.
The right is done and the left not yet
the wired
Look
This is the most problem that have the lillicat's dolls with this body
But with this I fix it
and the doll hangs straight more time.
The wire is inside
You can also do this with arms
but I use a thinner wire
I think the arms doesn't need too much strong
they are slim
And now we try they lay down
This was hard to me xD
Les't see here
lets try to put it down.
This wire it's not very well.
let's try to straighten a bit
[I keep fighting with wire]
Look! The wire rise here a bit.
You can do this process with any other doll,
not necessarily with a Lillycat one.
But with her is who I get better results
I have to try this with Minifee
because some of you knows I'm very
very tired with the Minifee and her legs.
but as she has another system
with more pieces and more complicated
I don't think wire will work.
If you ever try, let it to me down in comments
And done!
This leg works.
Now she has more mobility
and goodbye to the weir knee movement
and stand like a rock!
I hope you like it and it helps you
Please, write me down if you have any questions or problems
As I already said
I used the nº 6 wire but you can use another thinner and put it double.
If you see with one doesnt work, put it double.
Put two bars in each leg or arm
At arms I use thin wire
arms are slim so it works better
Down here is Like, Subscribe, the ring and many things that doesn't work xD
The comments: write me "Hey! It worked"
or "look, it doesn't work"
and i can help you with anything
Write me
because I always respond ;)
this will be my new slogan: "I always respond"
See ya!
Không có nhận xét nào:
Đăng nhận xét