Thứ Ba, 2 tháng 5, 2017

Youtube daily report May 2 2017

Hey I'm Kevin and I'm so glad to be here because life without you is just Bleh…

Doll.

A cute little guy that when you squeeze it, you never know what might come out.

Psst! It's his tongue. Which looks like it could use a little robotic taste activation

courtesy of Salt and pepper shaker robots because this is LÜT.

Clear your schedule for the world's first colorless coffee called...Clear Coffee.

How do they make this?

Well, it's. "made from Arabica beans and pure water, and produced by methods which

have never been used before."

Okay, so the way they make clear coffee is muddy but it only has 4 calories so you can

save

That walk around the exercise block toy for another day.

Now rest up with...

Bedlight!

A bright solution to smashing-into-walls-trying-to-find-the-light switch-induced concussions.

Its motion sensor activates the five foot LED strips when you get out of bed -- illuminating

the room from beneath your previously bland box spring.

So you can radiantly rest up for

Shooting your alarm clock.

Singeek Lock n' Load is a surefire way to wake you up since you have to aim to turn

it off.

To snooze, nail it five times but if you're alert enough for target practices you might

as well hope in the shower with

3D Soap Foam Pen.

Simply add liquid soap to the plastic base and start creating fabulous foam formations.

It comes with decoration items like eyes, ears, noses, and more so you can scientifically

celebrate at your artwork with the Lab Cocktail set.

Featuring test tubes and beakers to majestically mix and deliver delicious drinks but until you fill them up

they're

Hollow...Face of Einstein Illusion.

This painted puzzling toy never appears to be concave even when that part is facing you.

Our brains are programmed to know that faces are convex so even when we aren't looking

at that side, we fill it in and see what isn't there.

But ya now what is there? What?

Cool Blue Light Experiment Kit.

Which includes eleven different luminescent experiments to feed your brain with like learning

how fireflies glow or making a penny glow.

It's glow fun, easy, and as multifunctional as

Hideez Key.

This small square can be used to unlock doors and securely keep your passwords in one place.

It can even fill in your passwords for you.

It's safe because only your alluring eyes make it usable.

Also it alerts you if you leave it behind because you need it as much as it needs U...SB

DIY collection.

This shop features a plethora of cute little flash drives you can take apart and put

back together.

Monkeys, Penguins, Ninjas....lend me your ears.

For Animal Earrings.

From this ferret, to this pug, and all the way to this hungry hippo, you'll light up

the room like

Dinosaur 3D optical LED Illusion Lamp.

With eight changeable colors to get your prehistoric eye candy action on.

Lampeez also have other designs for illusion lamps but if you need a more mythical creature

hop on over to the Unicorn Hopper.

Which thankfully comes with a pump so you don't have to waste your precious breath.

If you think bouncing around on this thing is childish, I'd like to point out that

it does indeed come in an adult size so no need to hate when you can decorate with

Pattern Rollers.

Thanks to these you don't have to be trained in the art of intricate ornamentation because

ya just dip it in paint and roll it along the wall and it looks pretty.

Oh these would just look gorgeous next to my

Unfathomably unclogged defecation dungeon with Pongtu Toilet Disposable Sticker Plunger.

Seal it tight over the bowl, push it down, and watch as all your breathtaking business

is freed.

Okay this is actually gettign a little gross so...I'll just go.

I guess…

Alpaca Bag.

Links to all LÜT in the description below, click here for a playlist for more LÜT...and

as always, thanks for watching.

For more infomation >> Invisible Coffee? -- LÜT - Duration: 3:53.

-------------------------------------------

10 Most POINTLESS Wars Ever Fought! - Duration: 12:16.

- Ya know, some wars are fought over freedom and some are

fought over pastries?

(sword slicing)

(engines revving)

If there was ever a lesson not to mess with your neighbors,

this would be it.

Way back in 494 AD in Saudi Arabia,

the Banu Taghlib and Banu Bakr tribes

got into a disagreement over a camel.

The camel, owned by a woman named Al Basus,

wandered off to go hang out with some of the other camels.

Now, Al Basus' nephew was the leader of the

Banu Bakr tribe and those other camels were owned

by the rival Banu Taghlib tribe.

That wouldn't have been that big of a deal except

that the chief of the Banu Taghlib's

killed Al Basus' camel not realizing that it wasn't

one of his own.

When her nephew found out, he took an eye for an eye

to a whole nother level and killed the chief.

That sparked a massive war between the two tribes

that lasted for 40 years.

Okay look, I get it, camels are precious,

but I'm pretty sure a four decade long war that's still

referenced as a warning against holding a grudge

wasn't the best way to deal with the problem.

I know they got them lovely camel humps,

but you just buy another one instead of starting a war

and killing people.

It's a good choice.

(ominous music)

The golden stool is the royal throne of the Ashanti people

and is believed to hold the spirit of the Asante nation.

It's so precious that few people ever get to even see it,

let alone sit on it.

Asante was located along the Golden Coast in what is now

Ghana and back in 1900, while their chief was in exile,

they were dealing with the British trying to

colonize their land.

But on March 25th, the British governor,

Sir Frederick Hodgson, demanded that they not only

let him sit on the stool, but also give it to him

to bring to the Queen.

Oh, that was bad movie Freddie!

The request was so disrespectful that the chief's mother

led an attack against the Brits.

The siege lasted three and a half months

until the Brits with heavy reinforcements broke through

on July 14th.

Sadly, in retaliation, local villages were pillaged

and land was stolen.

Over 2,000 soldiers and countless more civilians

were killed and all because some guy

couldn't sit on a stool.

It's not like it was a toilet and the guy was just

urgent to make ca-ca.

It was just a regular stool.

He was just lazy and didn't wanna stand up.

Man, these people.

On September 17th, 1788 in the midst of the

Austro-Turkish war, an Austrian army of 100,000 men

set up camp near the town of Cria-sha-besh.

A group of Army scouts crossed the nearby river

to make sure that the enemy Ottoman army wasn't close by,

when they met some gypsies with a whole lot of schnapps.

The scouts were pretty bruised up when more

infantry soldiers showed up and demanded that they share.

But the scouts refused and no surprise,

a fight broke out and a makeshift fort was built

around the barrels of schnapps.

That's kinda crazy.

I've never wanted to drink that badly in my life.

But it gets worse because amongst the chaos,

shots were fired and thinking it was the Ottomans invading,

soldiers started yelling, "The Turks, the Turks,"

which was made worse when German speaking officers

started yelling halt, which sounded to some like Allah.

It was just a whole big mess and then the fight

woke the rest of the camp who joined into the battle.

By morning, 10,000 soldiers had been killed and wounded

by their own men.

Yeah but, still got the schnapps though.

The San Juan Islands are located between Washington state

and Vancouver Island, but ownership of the land

was never clearly defined by the US or the British.

In the mid-1800s, the British-owned Hudson Bay company

moved onto the island and set up a huge sheep ranch,

but then in 1859, American settlers showed up

thinking it was their land.

Things were pretty tense and then on June 15th,

American Lyman Cutlar found a pig digging in his garden,

so he shot it.

Mmm, bacon.

Problem was, the pig belonged to Charles Griffin, a Brit.

When the British police tried to arrest Cutlar,

he called for military support.

By August 10th, five British ships and 2,140 troops

were face to face with 461 Americans and 14 cannons.

But luckily, both sides gave the order to only fire

if fired upon, so they just kinda sat there.

It took over six weeks for each side to agree to reduce

their armies, but the tension lasted 12 years

when America officially took control of the islands.

See kids, think twice next time before you go into

an unknown island and start shooting pigs.

In 1731, the War of Spanish Succession ended

with a treaty that let British traders take 500 tons

of goods and as many slaves as they wanted

from Spanish colonies.

It wasn't much of a peace deal, so Britain and Spain

were at war a lot.

In 1731, Julio Fandino, the commander of a Spanish

patrol boat, boarded the British ship, The Rebecca.

Fandino accused the captain, Robert Jenkins, of smuggling

and as punishment, he cut off Jenkins' left ear.

He was like an early, more civilized Mike Tyson.

So, in 1738, British Parliament decided to hold a hearing,

no pun intended.

Lucky for them, Jenkins had kept his detached ear

for seven years and brought it with him to court.

They were so outraged by the shriveled little ear

that they actually declared war.

407 British ships and 186 Spanish ships were lost

and over 20,000 British were killed

along with 4,000 Spanish killed and 5,000 total wounded.

The war lasted nine years with no territory gains

or a winner, all over an ear.

Man, I can't listen to this story anymore!

Heh, see what I did there?

Ear joke.

From 1838 to 1839, France and Mexico were involved

in the Pastry Wars, but don't get too excited.

It wasn't nearly as delicious as it sounds.

At the time, many countries were trying to take control

of Mexico and people were getting upset

with all the damage being done to their property.

So, in November of 1838, a French pastry chef,

Monsieur Remontal, issued a complaint with the French King,

Louis-Philippe.

He claimed that in 1832, his shop near Mexico City

had been looted and he wanted 60,000 pesos in compensation.

So, the King gave him his full support and demanded

that Mexico pay 600,000 pesos in damages,

but Mexico just refused.

So, France sent a fleet of warships to Veracruz,

the main port in the Gulf of Mexico.

Not only did he occupy the entire city,

but they blocked the Navy leading to Mexico declaring war

on France.

It only ended on March 9th, 1839 when Britain intervened

and got the Mexican president to agree to pay.

That would've been way more interesting if someone

just stole a whole bunch of croissants

and two countries went at it.

(sigh) And more tasty.

On February 6th, 1840, the signing of the

Treaty of Waitangi allowed the British to legally occupy

New Zealand, which wasn't exactly favored

by the local tribes.

The British began to take over more control

and move the capital from Waitangi in the Bay of Islands

itself to Auckland.

This was upsetting to the Maori tribe, which had signed

a deal to ensure their independence.

As the region lost out on huge revenues because of the move,

they built up support for a rebellion against the British.

And on July 8th, 1844, supporters cut down the flagstaff

that flew the Union Jack on Maiki Hill

in Kororareka.

But it did not take long for the British to put up

a new pole and flag.

So, they went and cut it down again.

In six months, the pole was cut down

and put back up three times.

Having enough, on March 11th, 1845, the 600 armed Maori

stormed the city and fought the British who were outnumbered

but eventually won.

The Battle of New Orleans was the biggest battle

of the War of 1812 between the US and the British.

British forces had made their way down to Louisiana

with hopes of taking New Orleans.

On January 8th, 1815, they marched on the city

but Major General Andrew Jackson had set up a strong

defensive that was three lines deep

and four miles long.

The fighting lasted until January 16th and it was

one of the war's bloodiest battles, but amazingly,

the Americans won with only 100 casualties

compared to the 2,000 British who were killed.

Only one small problem.

The battle was completely unnecessary.

That's because when the fighting started,

the war was already over.

Earlier, on December 24th, 1814,

a peace treaty between the US and the UK was signed

in GET, Belgium, effectively ending the war.

But see, 200 years ago, news didn't travel like it does now

and it took weeks for the news to reach North America

and the troops.

Damn technology, you scary!

In 1958, Iceland claimed that they had exclusive

fishing rights 12 miles off their coast.

Sounds fair enough, except the British weren't happy

about it because this was four miles more than Iceland

had before.

But instead of dealing with the issue with long,

boring policy meetings, things got pretty fishy,

like literally.

Like a scene from the Three Stooges,

the captains from both sides started throwing

live cod at each other.

At one point, Icelandic patrol boats tried to board

the British ships, but they chased them off

with axes and hammers.

Iceland even tried to blast a British fishing boat

out of the water, but was chased away by a gang

of British naval ships.

By the end of it, Iceland had six Navy ships

and Coast Guard vessels up against the force

of the British Royal Navy.

It took all the way up until 1976 for the British,

after being internationally mocked and losing tons

of money on military expenses, that they decided to quit

and let Iceland keep their water.

The British love their fish, do they?

It's not really worth it now, is it?

No.

The Kettle War took place in the Netherlands in 1784

and is considered to be the most humiliating war

of all time.

At that time, the Netherlands were split

into two territories.

The Northern Netherlands and the Austrian Netherlands

backed by the Roman Empire.

Since the late 1500s, the Northern Netherlands

had blocked trade ships from using the Scheldt River

to access Austria-controlled Belgium.

But on October 8th, 1784, the Roman Emperor,

Joseph the Second, decided to send three ships,

including his prized merchant ship, Le Louis,

up the river figuring it was about time that the Dutch

just let them use it.

No one ever thought that the Dutch would even notice,

but oh boy, they were wrong.

With tensions running high, a Dutch warship

fired a single shot at Le Louie and it hit

a kettle of soup.

This alone caused the army to surrender.

The Emperor tried to save face by declaring war

on October 30th but no one took him seriously.

I'm pretty sure this is where the phrase,

"Pick your battles," came from.

Hey guys, thanks so much for watching this.

As always, I would very much appreciate it

if you left a like on it if you enjoyed this video

and of course, subscribe if you haven't yet.

Don't forget, I'm going to have a brand new video for you

tomorrow at 12, west coast time,

three eastern standard time.

So, make sure you come back to my channel then.

Have a great day, I'll see you then.

For more infomation >> 10 Most POINTLESS Wars Ever Fought! - Duration: 12:16.

-------------------------------------------

10 SWORD COMBOS/STRINGS YOU NEED TO KNOW - SWORD RUSSIAN MAFIA - Duration: 5:42.

DLight into Sair is a true combo, meaning there is no dodge window.

It works at all damages because DLight on sword has zero variable force which means

that damage doesn't increase the push back distance so the damage doesn't affect the

combo at all.

It has very low follow up potential.

It's the only sword combo that works at all range and damages so it's the most reliable

sword combo to use in any situation.

DLight into dair is a true combo but only if you do it at very close range.

This is because the first hitbox is very skinny and hits right below the user, if you miss

with that hitbox, it's still a very quick string, which means that it has dodge windows

where the enemy can dodge, this is because the 2nd hitbox is much bigger than the first

hitbox so it's more likely to hit but comes afterwards.

And you already know at what damages it works and why, that's right, zero variable force

on DLight.

It has incredible follow up potential that can lead into three hit combos or even four

hit strings that I will list in this video.

DLight into Recovery is a true combo . It works at all damages because, yup you guessed

it, DLight.

It works at a reasonable mid to close range although it can still be a string if you do

it at far range without jumping.

It has very low follow up potential where you have to rely on a dodge read to follow

up with it at lower damages.

If done perfectly, it's the most damaging and reliable knock out two hit combo on sword.

SLight into NLight is a very quick string.

It works at all damages and when you hear that, it usually means the starting move has

zero variable force which is true for SLight.

It works at close range only, the trick to landing the NLight after SLight is to always

hold forward even after you landed SLight until you hit the NLight.

It has low follow up potential which is mostly at lower damages.

SLight into DLight is a slow string.

It works at all range and damages so it's a bit more convenient than the previous string

but is much easier to dodge or jump out of.

It has great follow up potential because DLight has many true combos so you can follow it

up into Sair, Dair or Recovery for lots of damage.

Nair into recovery is a quick string.

It works best from 0 to 60 damage.

This string can work at any range you land Nair at but it's faster, therefore harder

to avoid when you land the nair close to the enemy.

It has low follow up potential.

DLight, dair into sair is a slow string at lower damages and quick string at higher damages.

It works from 60 to 120 damage.

The range also depends on the damage, at lower damages you want to hit close enough so the

enemy bounces closer to you, at higher damages, you want to hit it so the enemy bounces a

bit farther from you because they get bounced too high at that point otherwise.

This string has no follow up potential.

DLight, Dair into gravity cancel NLight is a true combo at 100-120 damage which is a

very small window to use it in but it can still be a decent string starting from 60

damage and it becomes a tighter string as it approaches 100 damage because the more

damaged the enemy is when you land dair, the longer they are stunned for.

This combo works at close range with DLight as well as with Dair but not too close.

Ideally you want to position the dair so that you bounce the enemy almost straight up but

also a bit away from you so that they land right in front of you for the GC NLight to

work.

It has no follow up potential.

If this combo sounds hard to do, that's because it is, you'll need to practice in

training mode a lot to be able to use this in real matches.

This is a quick string that works very similar to the previous combo except it's not a

true combo.

It works at 60 to 90 damage.

This string works at close range with DLight but the Dair is a bit more flexible because

DLight covers a wider area than NLight but you still need to hit the dair relatively

close to the enemy so they don't bounce too far away so the GC DLight will hit.

This string has great follow up potential because it has a second DLight which can then

combo into sair, dair or recovery.

Successfully pulling this string off is the simplest way to get the most damage on sword.

This is yet again another variation of the DLight into Dair follow up.

This time it ends with a recovery, doesn't require a gravity cancel and it's a true

combo.

This combo works from to 160 damage, although you can still use it as a string if you don't

jump starting as early as 50 damage.

This combo works at close range with DLight and the Dair has to be very close to the enemy

as well because the recovery has a smaller hitbox than the Nlight and DLight so this

combo requires the most precision of them all to pull off.

It's very worth it though if you can pull it off because it' the earliest knock out

combo on sword that can K.O a 3 defense legend starting at only 120 damage, either that or

it'll just do a lot of damage.10.5 It has no follow up potential since it is

pretty much a knock out combo.

And I already know what you guys are going to say, it's a true comb with three hits

and it kills so early, almost as early as the old Russian mafia.

So I'm gonna go ahead and name it the sword Russian mafia because even if I don't, you

guys will so I may as well.

Hey look, it's the sword Russian mafia, but seriously, it's kinda broken.

I hope this guide helped you out.

Please leave a like and subscribe if you enjoyed it, and if you don't want to miss any of

my next videos, click that bell under the video.

Thanks for watching and I'll see you next time.

For more infomation >> 10 SWORD COMBOS/STRINGS YOU NEED TO KNOW - SWORD RUSSIAN MAFIA - Duration: 5:42.

-------------------------------------------

REDWOLF EN LA IWA 2017. - Duration: 10:42.

Now we will show you a video where Saul from RedWolf Airsoft

Tell us about some of the IWA 2017 new products

Some of them are on stores already, some of them on sale after this spring

I decided to make this video because Saul explains this better than me

The info was too long in the other video, so we put it here

Check this out, because in my opinion some of this products worth it

Let's start

This is the ML-36 TAG Innovations CO2 Grenade launcher, they are from Russia

You can use it with different grenades

A pyrotechnic grenade that explodes and throw BBs

Smoke grenades

Dust grenades to mark the target

And rubber dummy grenades, for trainning

The ML36 maximun range is 150 meters

Really, 150 meters. Some videos prove it

We open here. You can see the spiral barrel

We put the grenade inside

Close it, and shoot

Obviously you must aim depending of the distance

The CO2 bottle is stored here

You can't see it now, but we can put the CO2 bottle here

once we don't flip up this and press

We won't prick the bottle, so it will remainwithout leaks

We calculate the distance we want to shoot

This marks are for actually functional distances, 50, 75, 100 and 150 meters

Each CO2 bottle can shoot from 8 to 10 of this grenades

Not heavy, not heavy at all. An empty speedloader is heavier than this

Here we can storage 2 more CO2 bottles. You can activate 3 of them for having from 24 to 30 shoots

So you won't need to be changing the the bottles constantly

Or you can just storage the bottles here

This is the ML36 Stand Alone, or we can separate it and put it on any rail

What is this?. -For removing it

We pull this piece

It doesn't come with this red dot, but comes with the RIS so you can use any sight

Cool grenades, here you have a catalogue with all the grenades

Can I take it to the toilet? -Sure

You have different grenades, based them all on the same system

This is the powder grenade

Also a dummy grenade, it just makes noise

Another grenade that spread BBs to 10 meters

And also a smoke grenade

The pyrotechnic grenade is the most common

It explodes and throw all the 0'20 BBs

The smoke grenade is second one more used

You have the color code here, red is explosive, yellow is dummy and blue is powder grenade

And another one that is not here, the smoke grenade

The video we have on YouTube, about Tim in Russia with tanks

They were using this TAG grenades

Here we have the new Airsoft Innovations grenade

Burst XL, this grenade complements the Cyclone

This is a sound grenade, it doesn't throw BBs

instead of being plastic, is made of CNC aluminum

It explodes doing 125 decibels at 5 meters distance

Enough for calling the hit

but this won't make you deaf like the CO2 Thunder grenades

Another pro is that it's small and compact

it works similar to the Cyclone

The detonator on the top part, we remove it and put the pin

Instead of throwing BBs, we use a single use membrane

Put the membrane, close here

And then just put the gas here

don't forget that you must put only 1 or 2 seconds of gas load

We will notice that the membrane gets curved

remove the pin, throw the grenade

everytime we throw it the cost is around 40 or 45 cents of euro

because the membranes are cheaper than the CO2 bottles

And it's heavy. In our city, and i guess in other fields too

we have to throw the grenade under the waist or rolling on the floor

In catalonia we throw it over the knee. -Yes something like that

But in other places in Spain they can throw the grenades over the head line

if this hits you in the head and you're not using a helmet

this can hurt you seriously

But we hope that the Airsofters use the common sense

Now let's talk about Wolverine HPA Systems

Wolverine is an American brand, and we like to mention that

the owner was working for the NASA as materials engineer

so it's a good reference to know this product has good materials

He knows what he's talking about, sometimes too much

because it's hard to understand everything

This has different HPA systems, for different players

This is the INFERNO, made for those who start with the HPA

for those who want it easy, having stable FPS

Looks like the typical piston. What is this?

The power connection

Here enters the air, and here the connection to the trigger

sending information about the fps, rate of fire and so

and here you can see this works with open and close bolt at same time

before it was only one position and it had incompatibilities

but now it is solved with the GEN 2

I have a GEN 2 and I call it the lawn mower

because it's a white line of BBs

The HYDRA GEN 2, I call this the System for experts

This let you adjust a lot of things, but you must know how to do it

if you do it wrong it won't shoot the BBs

You can adjust the rate of fire and the amount of air

I mean the amount of air it shoots

This is more complicated to use, I could be 10 minutes explaining it

But in resume the HYDRA is for experts, and the INFERNO is for beginners

This is the one I like the most, the BOLT

BOLT is an HPA system made for bolt action rifles

made for VSR

here we have a VSR with the BOLT system with the Wraith that we'll see later

The Wraith is made for using CO2 bottles instead of an compressed air bottle

you can move the bolt this easily

And done, you can adjust it to 650 FPS

thanks to the HPA you can adjust it to the last FPS

One question, where can you play with more than 600 FPS?

We can't play with 650 FPS in Spain, but they do in the USA

And the last system is teh REAPER

made for DMR, for semi shooting

this technology combines the INFERNO with the BOLT

The INFERNO is for AEG and the BOLT is for semi shooting

with this you have a double way valve that makes a prechamber

so the shooting is more stable, and slow

different systems, but it doesn't mean you can't use this system on an assault rifle

If you like to shoot in semi, it works

good thing of this is that you have different systems

but also different ways of putting the air inside

You have the regulators, the typical air regulator with the bottle

or you can use this beauty that works with CO2

You remove the replica stock tube, the CO2 bottle goes here

we open it easily

remove the CO2 bottle

put a new one

and close again

at first is hard to close it because it prinks the bottle

the air expands and it gets stuck, you can't open it until you use the gas

each CO2 bottle can shoot 200 BBs, it means 2 Mid-Caps

the air is well used

here is the regulator for adjust the FPS

this, combined with the INFERNO GEN 2 is the most used combination in the USA

Soon we will have the QUAKE, for a good recoil

powered by gas the kick is hard and fast

all of this will be on stores from May to June

I mean, REAPER, QUAKE and HYDRA

suddenly you have many options for the HPA systems, for different players and roles

Cool toys uh?

My conclusion is that I can't wait to try the new Airsoft Innovations Burst grenade

Because we had a good experience with the Cyclone

this Burst grenade has a more simple mechanism than the Cyclone

The HPA systems i see a new world of possibilities

I'm not an HPA or Polar Star user, but I'd like to use it in the future

but it's something I'd like to have in the future

specially if you can use CO2 bottles instead of the big air compressed bottle

And finally, that grenade launcher is madness

not only the look, but also because the range they said it has

But when they told me the aprox price, it's too expensive for me

That's all, i hope you liked it

Greetings, and see you on the next video

For more infomation >> REDWOLF EN LA IWA 2017. - Duration: 10:42.

-------------------------------------------

Did a Planet Escape the Solar System? - Duration: 3:54.

The solar system has looked pretty much the same for billions of years:

four inner rocky planets, four outer gas giant planets,

plus a bunch of dwarf planets and moons and asteroids and comets zooming around the place.

But it wasn't always like this.

We already know that the outer planets, like Jupiter and Uranus,

probably formed much closer to the Sun than they are now.

And the closer scientists look, the more it seems like

we're still missing some pieces of the planetary puzzle.

Which is why some astronomers think that our solar system might have once had

a whole extra planet that got kicked out as the other planets were shuffling around.

Of course, without a TARDIS, we'll never know the exact conditions

as the solar system was coming together four and a half billion years ago.

But we can use computer simulations to study the past.

Astronomers set up lots of different scenarios for the early solar system,

then simulate what would have happened over time,

based on things like how the gravity from one planet would have affected the others.

If a simulation ends with a solar system that looks a lot like what we see today,

that means the scenario's original setup could be a good model

for what the solar system used to look like.

By using this technique, astronomers developed what's known as the Nice model.

That's the model that suggests that our outer planets originally formed

closer in than they are today.

The disk of gas and dust surrounding the young Sun would've been

a great place for them to form.

Eventually, though, energy from the Sun blew all the gas away,

leaving behind the planets embedded in a rocky disk.

According to the Nice model, the planets then began to move,

but astronomers still aren't sure exactly what that movement looked like.

One possibility is that they moved mostly through encounters

with rocks in the disk called planetesimals.

When one of these rocks passed close to a giant planet,

it would've been thrown into a new orbit by the planet's powerful gravity.

But at the same time, the planet would've moved a tiny bit in the other direction.

Problem is, hurling planetesimals one by one

is a pretty slow way to move through the solar system.

And while the planets were migrating,

their gravity was probably wreaking havoc on the inner solar system.

Researchers have a lot of trouble setting up simulations of this

that end up actually looking like our solar system does today.

One problem is that a lot of the time, the simulations end

with Mars being ejected from the solar system entirely.

So that's clearly wrong.

You can avoid a scenario where Mars zooms away,

if the gas giant planets migrated outward much more quickly.

And that could have happened, if the planets were also slingshotting each other around,

in addition to all the planetesimals.

But even though in those simulations, Mars tends to stick around,

it's not enough to entirely avoid the problem of losing a planet.

A lot of the time, Jupiter just throws out one of its fellow gas giants instead.

Physics-wise, it makes sense: the loss of a planet is what provides the energy

that gets the other planets migrating outward more quickly.

But again, that's obviously not what happened,

because Saturn, Uranus, and Neptune are all still here.

So astronomers realized that there had to be something missing

in their picture of the early solar system, like another planet;

one that did get ejected from the solar system, which is why we don't see it anymore.

In one study, when researchers ran thousands of simulations that started with an extra

outer planet, they ended up with a normal-looking solar system about a quarter of the time.

Other investigations have been less conclusive, so we definitely can't say for sure

that our solar system once had an extra planet.

But it is possible, and it would explain a lot.

If it really did exist, this mysterious world was probably an ice giant

with about as much mass as Uranus and Neptune.

And like those planets, it would've formed

somewhere outside the orbits of Jupiter and Saturn.

To be clear, though, wherever it is now,

it's not the Planet Nine you'll sometimes hear people talk about.

If it exists, Planet Nine probably got its current orbit

hundreds of millions of years earlier.

Our lost giant would've joined the billions of other rogue planets

drifting through the galaxy on their own, unconnected to any star.

By now, it would've traveled so far that we'd never be able to identify it

as one of our long-lost neighbors.

In fact, we'll probably never know for sure whether it even existed.

The best we can do is come up with better simulations,

and look at other star systems for clues.

If we're still trying to figure out how many planets our solar system

started out with, who knows what else we have left to discover?

Thanks for watching this episode of SciShow Space,

and thank you especially to our patrons on Patreon who make this show possible.

If you want to help us keep making episodes like this, you can go to patreon.com/scishow.

And don't forget to go to youtube.com/scishowspace and subscribe!

For more infomation >> Did a Planet Escape the Solar System? - Duration: 3:54.

-------------------------------------------

Sean Hannity Admits That Fox News Might Be Done For Good - Duration: 4:25.

Things at Fox News might be even worse than most people realize.

The man who had been president of the network for about a year after Roger Ailes was ousted

was ousted yesterday, and now a woman has come in, and Sean Hannity isn't very happy

about that.

Sean Hannity tweeted out a response to somebody who asked him a question said, "This might

be the end of FNC as we know it.

Done.

If this continues."

Now, if this continues, we're not quite sure exactly what he means.

Maybe he means working for a woman, but perhaps Hannity has enough self-awareness to understand

that if this continues might mean the criminal behavior of Fox News.

I say criminal behavior because some people may not realize that Fox News, the network

itself, is actually under criminal investigation for covering up the settlement payments that

they've had to pay out to sexual harassment victims.

They hid that information from the network shareholders, a move that is illegal, but

Fox News is becoming this, I don't want to say elephant in the room, because we're all

talking about it, but it has become this disaster of a catastrophe of a nightmare for everyone

at that network.

Most of them deserve it.

Sean Hannity deserves this.

Tucker Carlson, Bill O'Reilly deserve this.

The women who were sexually harassed absolutely did not deserve that kind of treatment.

They don't deserve that kind of behavior.

The people who are just working there because they need the jobs or because they're good

at what they do, they don't deserve this.

They're not the ones out there spewing this partisan, horrible, nonsensical rambling that

this network puts out every day.

It's the hosts, the Steve Doocys, you know, the Brian Kilmeades, the Tucker Carlsons,

the Hannitys, those are the people doing damage to this country, and they deserve what is

happening to this network because they have fostered it, and in some cases, according

to allegations, have participated in it.

Fox News does deserve to go away.

Fox News as we know it, as Hannity says, does need to die.

It's time for this network to go away.

I mean, for 20 years or more they have been causing unquestionable damage to the United

States.

They're the ones that helped George W. Bush win reelection in 2004 in spite of the fact

that he had a negative approval rating.

That kind of thing didn't happen before that, but Fox News out there every day preaching

to their easily manipulatable right-wing audience helped this man get elected.

They helped promote Donald Trump and get him elected, along with Morning Joe.

They're the ones who did that, so yes, they have caused uncountable damage to this country,

and they deserve what's happening to them.

They deserve to fall apart.

They deserve to go out of business.

Rupert Murdoch has been a cancer on planet Earth.

He is spreading anti-climate change propaganda, right-wing propaganda, capitalist right-wing

[Iran 00:03:24] libertarian laissez-faire nonsense that doesn't work in the real world,

but that's what the network does.

It's brainwashed enough people in this country that they think we can have trickle-down economics.

The lowest class believes that if we give the wealthy more tax breaks they'll eventually

get some of that money, and it's because Fox News tells them that.

Now, not all of them believe it, but there are enough that do, and it is because Fox

News is telling them that.

I hope Sean Hannity is right, and I hope more than anything that this is the end of Fox

News as we know it.

For more infomation >> Sean Hannity Admits That Fox News Might Be Done For Good - Duration: 4:25.

-------------------------------------------

Can the GOP unify to pass a healthcare bill? - Duration: 3:46.

For more infomation >> Can the GOP unify to pass a healthcare bill? - Duration: 3:46.

-------------------------------------------

Chris Webber's Full Court Pranks - Kyle Larson in the Driver's Seat | truTV - Duration: 4:16.

today on "Full Court Pranks."

Chris: This is NASCAR's up-and-coming superstar,

Kyle Larson.

All right. Whew!

Now, today, he's gonna be taking these two stock car racing fans

on a ride

they'll never forget.

-How's it going? -Good. How are you?

-Good. -So, this'll be yours.

They think they're attending a VIP event

to meet a real NASCAR driver.

What they don't know is he's already behind the wheel.

-So excited. -Yeah, I know.

-We're excited to have you. -What is this event about?

-It's a NASCAR event. -Are you a big NASCAR fan? Yeah.

-Super, super fan.

-Sure.

-What do you love about it? -The people.

-I love the energy. -Yeah.

I love -- It's like you got your NASCAR fans --

-It's like, they're a riot.

-That's awesome.

I don't really understand the NASCAR thing.

They turn left and left, and I can't --

I can't watch cars

go in circles

for more than

a couple minutes.

Have you ever actually watched one

or been to one or anything?

I can't stay too involved in it long enough.

You have to give it more than just one race,

'cause there's so much

going on.

Races are so long.

♪♪

-Hey, how we doing? -Good. How are you?

Good. What are

you guys here for?

We're here for the VIP event.

Okay, do you have

your tickets?

-Thank you! -Okay.

[ Device beeping ]

I'm -- I'm really sorry, but this thing's just not scanning.

Are these

the original tickets?

-Oh, yeah. No, that's original. -No, that's the original one.

Um, do you have a different pass?

-No. -You could try un-installing

and reinstalling your app.

Sometimes --

technical difficulties.

You know what? I might try that. Hang on one second.

-Do have, like, a list of... -Yeah, I have like a master --

-I have a master list. -Is my name on that, or no?

-Okay, I'm gonna go check.

-Okay.

I got to get to the next pick-up.

All right, you know what? I'm gonna run into the admin office.

Are you okay? All right, I'll be right back.

-I'm gonna run in there.

-Okay.

This is something

you really want to go to, huh?

-Yeah. -Is there something I can do?

Unless you can sweet-talk the security guard somehow.

Maybe we could bribe him.

I might be able to do something.

He looks like he might need 20 bucks.

You want me to see if we can try and get in?

-Yeah. -So, are we waiting now, or --

-No, we're going. -We're going. You want me to go?

Yeah, you're good. Go.

Let's go.

Do it. Whoa.

-Why are you going so fast? -[ Gasps ] Oh, my God.

Stop the car! Stop!

What are you doing?!

What are we doing?

Oh, my God. Oh, my God. Oh, my God.

What are you doing? Don't go on the race track.

Oh, my God.

Get off the race track.

Kyle: Are we not supposed to be out here?

I don't think so. Aah!

Oh, my God.

Ideene: You got to get out of here. Really.

This is so unsafe.

Please stop the car.

-Hello? -Can you please tell the driver

to slow down and get off the track?

They want you to slow down and get off the track.

Whoo! This is nice.

Please stop the car so I can get out.

-Please. -Stop? I'm not stopping.

[ Laughing ] Oh, my God.

Oh, my God. [ Screaming ]

Okay. Can you please? Please stop.

Crystal: Oh, my God. Aah!

What are you doing?

Hey, hey.

[ Shrieks ]

Ideene:

What are you doing?

[ Screaming ]

Dude, I want to get out of this car.

Oh, my God. You need to stop.

Stop, stop, stop!

-What are you doing? -Hey!

-Both of you, out of the car! -Oh, my God.

Out of the car! You, out of the car!

-Out of the car?

-Ma'am.

-I don't know -- -What -- What is going on?

-I'm gonna -- I need a --

-Talk NASCAR driver?

Of course. That's what I'm here for today.

You want to meet one?

[ Laughing ]

Oh, my God.

-Oh, Kyle. -"Oh, Kyle."

You're on "Chris Webber's Full Court Pranks."

Oh, my God!

For more infomation >> Chris Webber's Full Court Pranks - Kyle Larson in the Driver's Seat | truTV - Duration: 4:16.

-------------------------------------------

Anna Wintour Throws Classy Pre Met Gala Party Source | TMZ TV - Duration: 1:13.

>> ANNA WINTOUR HAD A PRE-MET

GALA PARTY AT HER HOUSE IN NEW

YORK CITY.

TOM BRADY SHOWED UP, GISELLE

SHOWED UP, PHARRELL SHOWED UP,

KATY PERRY SHOWED UP, SIENNA

MILLER SHOWED UP.

A LOT OF CELEBS, ONE HOUSE.

HARVEY: IS -- SHE FEELS A LITTLE

OLD.

IS THAT STILL THE HOTTEST PARTY

IN TOWN?

>> WHO, ANNA?

HARVEY: YEAH.

>> OH, MY GOD, IT WILL NEVER NOT

BE.

>> IT IS AMAZING SHE'S STILL

POPULAR.

MAGAZINES ARE SORT OF A DYEING

BREED.

HARVEY: THAT'S WHAT I'M SAYING.

I GUESS BECAUSE IT'S THE MET

GALA AND IT'S ALL ABOUT FASHION

AND WHATNOT.

>> WE GOT HUMA SHOWING UP.

HARVEY: HUMA ABEDIN?

>> YEAH, HUMA SHOWED UP.

>> NO, THE OTHER HUMA!

THE OTHER HUMA!

>> YEAH, WHAT IS WRONG WITH YOU?

HARVEY: I DON'T KNOW.

THAT WAS STUPID.

[LAUGHTER]

For more infomation >> Anna Wintour Throws Classy Pre Met Gala Party Source | TMZ TV - Duration: 1:13.

-------------------------------------------

Retro Text Effect Adobe Photoshop Tutorial - Duration: 9:46.

how's it going everyone this is Chris

from spoon graphics bringing you another

video tutorial for Adobe Photoshop over

on my spoon graphics website I recently

published a couple of illustrator

tutorials and resources based around

retro type effects you know the popular

styles with basic 3d appearances and

decorative effects like inset faces so I

thought I'd also experiment with this

style in the dhobi Photoshop see how

similar effects can be made both

applications of their strengths is easy

to create the full 3d styling

illustrator while retaining live type

whereas Photoshop is far more powerful

at creating realistic gradients and

shading in today's tutorial I'll show

you how to create this great-looking

text effect it's made using a mix of

layer styles and some clever Photoshop

techniques but the best part is it also

makes use of smart objects to

non-destructively create the effect

meaning the original type element can

still be updated to change the wording

so begin by opening up Adobe Photoshop

and create a new document I'm going for

a document size of 2000 by 1200 pixels

fill the background with a color of your

choice do something that will complement

the color scheme of your type I'm going

for a pale green of 6 for 8 f7f use the

command and backspace shortcut to fill

the canvas click the new layer icon at

the bottom of the layers panel let's

select the brush tool configure the tip

to 0 hardness and a large size of around

1,800 use the X key shortcut to flip the

foreground and background colors around

so you're painting with white end of a

highlight in the top center of the

canvas reduce the opacity of this layer

to 30% to leave a Sol spotlight effect

select the type tool and lay out the

text of your choice the front trace

doesn't really matter too much as long

as it's somewhat retro-themed I'm going

with a font named MB Empire from my

collection but we'll click the layer to

open up the layer style options add a

gradient overlay then change the

gradient swatches to a dark to light

pinky red I'm using the colors b7 1 B 2

e 2 F 4 9 5 B E

right-click the layer and choose convert

to smart object this will preserve the

editable text within it so changing the

wording later we'll also update all

instances of this smart object

double-click the layer to add a whole

new set of styles to this smart object

begin with a stroke using the settings

seven pixels for the size positioned

inside and a really light pink color

such as FF II for e4 apply an inner

shadow next change the blending mode to

linear burn then uncheck the use global

light option and then to 120 degrees is

the angle in the distance to 15 and the

size to 30 pixels move the opacity

slider to around 50% add an inner glow

effect next change these settings to

linear burn using black in 220 pixels

for the side then reduce the opacity to

around 15% click OK to apply these

styles to see how the Korean inset

effect next we'll create a simple

pattern to overlay over the text face

create a new document 3 by 6 pixels use

the command + + shortcut to zoom right

into the document as far as you can go

and select the top half of the canvas

using the marquee tool hit the command +

backspace shortcut to fill this area

with black go to the Edit menu and

choose define pattern give it a

recognizable name such as 3 pixel line

pattern then close the document back in

the main working document double click

the layer again to add another layer

style this time select pattern overlay

and choose the newly created three pixel

line pattern from the drop-down choose

the blending mode to multiply to render

the white portion invisible leaving just

the black lines then reduce the opacity

to 10% it was subtle pattern across the

text space right click on the Smart

Objects layer and choose duplicate layer

given a name of 3d drag this layer below

the retro text layer and right-click and

choose clear layer Styles double click

the layer add a fresh set of styles

starting with a bevel & emboss effect

click the reset to default button at the

bottom of the panel leave it with these

basic settings add a color overlay and

choose a contrasting color to the text

face I'm using a mid blue of 4a 8 for 9f

this 3d layer is currently hidden below

the main text phase but you can toggle

off the visibility of the layer above it

check what it looks like the next part

of this tutorial makes use of a clever

photoshop trick known as transform again

or step and repeat for some reason my

photoshop sometimes glitches out when

it's applied to a smart object so I'll

show you a workaround that I've been

using rather than apply the

transformation effect to the smart

object I'll duplicate the layer and

choose rasterize from the right-click

menu the first part of the

step-and-repeat technique is to use the

shortcut command L&T or ctrl + c on

windows to set a transformation in this

case it's simply nudging the effect left

and upwards using the cursor keys once

this transformation has been applied

with the Enter key or the little tick

icon in the top toolbar the shortcut

command alt shift + T or transform again

while also creating a new layer with the

result now the transformation is saved

in Photoshop smeii

delete those rasterized layers and use

the command alt shift + t shortcut on

the smart object where it previously

glitched out it now works perfectly fine

repeatedly press the shortcut 40 times

to produce a three-dimensional effect

but basic bevel and emboss effect is

built upon with each new layer to form a

really cool 3d block appearance select

the move tool and click and drag the top

face into alignment and Shift + click

from the top 3d layer to the bottom 3d

layer in the layers panel and hit

command + G to create groups keep

everything organized double-click the

top 3d duplicate layer and add a drop

shadow effect change the blending mode

to soft light uncheck the global light

option and enter 135 degrees which sends

the shadow in a downwards 45 degree

angle and change the settings to 20

distance and 30 size reduce the opacity

to around 80%

scroll down to the last 3d layer at the

bottom of the layers panel right click

and select duplicate layer give this one

the name shadow drag this layer out of

the 3d group so it sits below the other

layers right click and choose clear

layer Styles double click the layer and

add a color overlay using a really dark

blue such as 0 6 0 b-17 head to filter

blur and motion blur and configure the

settings to 45 degrees with a distance

of 50 duplicate and rasterize the layer

in order to set up the transform again

technique without everything glitching

down this time use the command alt + t

shortcut and nudge the layer down and

left then hit enter press the command

alt shift + t shortcut to start the

transform again process but delete those

temporary rasterized layers and activate

the shadow smart object instead use that

command alt shift + t shortcut 60 times

to create a long drop shadow effect by

the way you can easily keep camp by

simply looking at the layer copy numbers

in the layers panel to make this shading

more realistic will fade the out by

adjusting the opacity of the layers

gradually select the first shadow layer

then hold the shift key and click shadow

copy 20 to select all the layers in

between reduce the opacity to 5% select

layer 21 up to layer 40 reduce the

opacity of these layers to 3% finally

select layers 41 to 60 and reduce the

opacity to just 1% select all the layers

from 60 right down to the original and

group them together retro effects like

this always look great with a bit of

grain create a new layer at the top of

the layer stack go to edit and fill then

change the drop-down menu to 50% gray

head to filter noise and add noise then

enter 3% with the Gaussian and

monochromatic options checked

jaison's layers blending mode to overlay

to allow the noise to interact with the

layers below it this graininess also

does a great job of smoothing out the

gradients to avoid any banding what's

really cool about this technique of

using

our subjects is it gives you the ability

to go back and edit the wording of the

text without having to update those

hundreds of layers individually

double-click the smart subjects

thumbnail of the first text layer to

edit its contents you can use the crop

tool to enlarge the canvas area to give

you more room and you can edit the word

in and even change the fun once you're

done go to file and save then close this

PSB file to return back to the main

document you'll see all the effects have

been automatically updated and applied

to the new smart object contents so if

you have fun making use of this text

effect within your designs there's also

loads more close game possibilities to

experiment with create unique retro

textiles if you enjoyed the tutorial or

lengthen your thumbs up on the video

would be really appreciated hit

subscribe to stick around on my channel

to be the first to see my upcoming video

tutorials and don't forget to check out

my illustrator versions of this kind of

retro effects over on my spoon graphics

website as always thank you very much

for watching see you in the next one

For more infomation >> Retro Text Effect Adobe Photoshop Tutorial - Duration: 9:46.

-------------------------------------------

Soy Luna 2: Luna mówi Ninie, że chce zapomnieć o Matteo [NAPISY PL] - Duration: 0:17.

For more infomation >> Soy Luna 2: Luna mówi Ninie, że chce zapomnieć o Matteo [NAPISY PL] - Duration: 0:17.

-------------------------------------------

Vena - Pojďme žít / let's live (G-Eazy & Kehlani - Good Life) - Duration: 3:55.

For more infomation >> Vena - Pojďme žít / let's live (G-Eazy & Kehlani - Good Life) - Duration: 3:55.

-------------------------------------------

The Hunt for Dark Matter - Duration: 1:01.

We're not sure exactly what dark matter is at all.

The motions of galaxies are governed by

something that's very, very massive that we can't see.

The HGC is a huge, huge project.

At the moment we have, it's a 10,000 pixel camera.

We're going to replace those with three million pixels each.

For anyone who's played with cameras

knows that this is utterly insane.

We've always been pushing the

boundaries of what is capable in electronics technology.

It takes imagining what that dark matter might

actually be, and then design a detector around it.

It's the highest resolution, slow

motion camera anyone's really kind of built.

For more infomation >> The Hunt for Dark Matter - Duration: 1:01.

-------------------------------------------

ODD SQUAD | Out to Lunch | PBS KIDS - Duration: 1:24.

Are you okay?

Yeah, totally. Are you okay?

Why wouldn't I be?

It's freezing in here and you're sweating.

Some people have different body temperatures.

(Screams)

What now?

Uh, uh...

I bit my tongue. Owwww.

I better go get a bandage.

For your tongue?

Yeah, gotta put pressure on it

or it'll blow up like a football,

and then people will be like,

hey, did you just catch a football in your mouth?

And I'd be like, hooray, touchdown,

but not really because your tongue hurts.

Did you follow my instructions?

We found two gadgets that measured five inches!

Show her, Gino.

This one, five inches.

This one, also five inches.

I said five inches long, not high.

What?

You were supposed to measure the length,

end-to-end...

Not the height, how tall it is...

Normally I'd be really upset,

but I feel like I'm learning a really important lesson

about measurement.

What happened when you fired both?

(Both laugh)

(Gibberish)

COOK: I'm not okay anymore!

(Screams)

For more infomation >> ODD SQUAD | Out to Lunch | PBS KIDS - Duration: 1:24.

-------------------------------------------

Jeep Wrangler Rough Country Front Sway Bar Disconnects 2.5 in (2007-2017 JK) Review & Install - Duration: 7:05.

I'm Ryan from extremeterrain.com and this is my review and installation of the Rough

Country Front Sway Bar Disconnects fitting all 2007 and up JKs.

These are available for two and a half inches of lift and there's a second set available

for three and a half to six inches of lift, so it just depends which lift kit is on your

JK.

Today we're gonna talk through the installation of these sway bar disconnects which is a very

simple one out of three wrench installation.

You're gonna be able to get these installed in about an hour with just your traditional

hand tools but we'll talk more about the install in just a second.

We're also going to talk about the construction and a few of the features of these sway bar

disconnects.

Disconnecting your front sway bar when you're off road has a lot of benefits.

If you have a lift or even if you have a factory suspension on your JK disconnecting that front

sway bar is going to give you a lot more front axle articulation, which simply means you

get to keep more tires on the ground at the same time providing more traction in getting

you over those tough obstacles.

Now you can certainly disconnect a factory front sway bar but you're gonna have to have

some tools on hand and you're going to have to have some bungee cords or some zip ties

to keep that sway bar up out of the way so it's not going to bind up in the suspension

when you're on the trail causing you to bend something.

What this kit allows you to do is have your sway bar links connected with a very quick

and easy to disconnect pin so that you can, in the parking lot before you hit the trail,

pull the pin, disconnect the sway bar, swing the links up out of the way, and the kit also

includes a spot to store those links.

So, you can pop them onto this bracket, again making it very, very simple to disconnect

and then to reconnect your sway bar.

Now this kit is going to be fairly inexpensive, however there are some other kits on the market

like the Teraflex one that are going to be right around the same price and don't require

you to drill to install this storage bracket.

So if you're not interested in drilling a couple of holes in your frame in order to

install that bracket but you do want to have the functionality of that storage bracket

I would recommend taking a look at the Teraflex brand.

As far as construction goes these links are going to be very similar to a factory sway

bar end link.

They have a tie rod end style ball joint on one end, they have a rubber bushing on the

other end, the difference of course is that this is going to be adjustable.

This link has a threaded rod and a stop nut so that you can adjust the length a little

bit.

There is a way to get your sway bar end links adjusted properly so that the sway bar is

at the proper angle when you're about halfway through your suspension travel, but most of

us will just eyeball the length of your sway bar and link.

You can get the sway bar to about parallel when the Jeep is sitting on the ground.

So, this kit is going to include those two-adjustable links.

One thing that I'm not crazy about on these links is that they're not greaseable.

If they were you'd be able to get a little bit more life out of not only the tie rod

end at this side but also the bushing at the other side, but this set is not going to be

greaseable.

Also, included in this kit is of course your quick disconnect pin.

This is going to take place on the bolt on the bottom side of your sway bar end link,

that's going to be on the axle side.

This allows you to very quickly and easily slide the bushing end over top of this and

connect it with the included pin, and of course, to reconnect it very easily as well.

The other thing that I mentioned earlier is that this does come with a storage bracket.

So, when you swing that sway bar end link up out of the way you have somewhere for it

to stay so it's not going to get bound up in the rest of the suspension.

Now the only downside to this bracket is that it does require you to drill a couple of holes

in the frame of your Jeep and use a couple of self-tapping screws to install the bracket.

Teraflex, as I mentioned before, makes a similar kit to this one however their storage bracket

goes on your front body mount so there's no drilling required.

If drilling is something that you're not comfortable with doing I would recommend taking a look

at the kit from Teraflex.

If you're okay drilling a couple of holes this kit is going to be a good fit.

As I said before, the installation of this kit is a very simple one out of three wrench

installation.

You can get these bolted onto your Jeep in just about an hour.

All you need to do is first remove your factory sway bar end links.

You'll be able to remove that end link from the sway bar itself and from the axle side

of its mount.

After that you'll be attaching your new end link, and this is the time when you want to

adjust the end link.

This end link is not double adjustable so you do have to have one end of it disconnected

in order to make that length adjustment.

So you can take a look at whatever sway bar end link you currently have on your Jeep and

adjust this one to be right around the same length using the stop nut to tighten it down.

After that you're going to attach the pin to the axle side of you sway bar end link

mount and then it's really just a matter of swinging the sway bar onto that pin using

the retention pin to hold it in place.

And the final step is going to be disconnecting the sway bar as you would on the trail, swing

the end link up out of the way so that it's parallel with the frame, and see exactly where

you need to mount this bracket.

You can really just hold the bracket up and see where it lines up, mark those holes, use

a center punch, drill the frame then install the brackets using those self-tapping screws.

Again, if you're not comfortable with drilling there are some other kits.

Teraflex, for instance, that has a very similar kit around the same price but doesn't require

drilling into the frame.

So as far as tools, you're going to need those traditional hand tools.

You are going to need a drill with a good sharp drill bit, you're going to need a center

punch, but other than that overall a very easy install.

Both of the front sway bar disconnect kits, the one for two and a half inches of lift

and the one for three and a half to six inches of lift, come in at right around $60, which

I think is a fair price for what you're getting.

I would like to see a sway bar end link that is greaseable to add a little bit of life

to it and to make sure that it remains quiet.

And I'd also like to see a bracket that doesn't require you to drill into the frame like some

of the other brands on the market.

But overall this is going to be a functional kit and it's going to be fairly inexpensive.

So if you have a lift on your JK, you'd like to go off road, and you'd like to get the

most suspension articulation and travel for the most performance out of your Jeep having

a set of sway bar disconnects is going to make it very easy and quick to both disconnect

and reconnect your sway bar.

This kit in particular is going to be fairly inexpensive and it's gonna get the job done.

So, that's my review of the Rough Country Front Sway Bar Disconnects fitting all 2007

and up JKs that you can find right here at extremeterrain.com.

For more infomation >> Jeep Wrangler Rough Country Front Sway Bar Disconnects 2.5 in (2007-2017 JK) Review & Install - Duration: 7:05.

-------------------------------------------

Diorshow Pump'N'Volume - Peter Philips' interview - Duration: 1:40.

the idea was to make the impossible possible

make possible for women to apply a mascara which is very rich

and creates really thick fat lashes

without clumping, like I can do when I'm backstage

by pumping you soften the formula and get a creamy volumizing effect

that creates those really rich fat lashes without clumping

Extra extra-large lashes, I start my routine

by using the Dior Show Maximizer in 3D then I pump the volume

I squeeze, apply zig zagging to get all the lashes coated from roots till tips

Bella is a girl that looks great and confident without

and she can transform herself become this amazing idealized, version

of a girl, by applying make-up, by playing with hair

by styling, she just loves to be a girl

Divine

Petillante

Real

which was great about this campaign, is that we actually

shot a part of the campaign in real backstage and which gives a totally different

dimension and vibration to the whole concept of the campaign

In this new palette, we've combined

different textures with different pigmentations, and they give just gorgeous harmonies to play with

you can go from a very natural makeup look to a very bold makeup result

it can seem complicated but it's a very easy palette actually

it's literally something eye catching that helps your eyes speak

For more infomation >> Diorshow Pump'N'Volume - Peter Philips' interview - Duration: 1:40.

-------------------------------------------

Jeep Wrangler Airaid MXP Series Cold Air Intake - SynthaFlow Filter (2012-2017 JK) Review & Install - Duration: 6:56.

I'm Ryan from extremeterrain.com, and this is my review and installation of the Airaid

MXP Series cold air intake fitting all 2012 and up JKs with the 3.6-liter engine.

There are two different versions of this kit available, one with the SynthaMax air filter

in either red or blue and one with Airaid's premium air filter.

Today we're going to talk through the installation of this cold air intake which I'm going to

give a two out of three wrenches because there is some cutting of the factory airbox involved

to get this installed.

We're also going to talk through the construction and a few of the features of this system.

Any time you help your engine to breathe easier, either in or out, you are theoretically going

to see some horsepower and torque gains.

However, with a Jeep most of those gains are going to be at the very top of the RPM range

where we don't spend a ton of our time.

What I would expect from a cold air intake like this is a little better throttle response,

some more noise from underneath the hood and possibly a few miles per gallon increase.

You may feel a little bit of a power increase, but again that is going to be more at the

top of the RPM range.

I do like this system because it has a completely enclosed airbox.

What that is designed to do is get the coldest, freshest air possible for an airbox that's

still going to be under the hood where it's generally warmer than outside of the Jeep.

This also does come with a couple of different choices for air filters, so again the SynthaMax

filter that has a little bit less cotton gauze in it and is designed to be a better filter

filtering out more particulate or the slightly less expensive premium air filter that does

have a little bit of the cotton gauze in it.

As far as pricing goes, for an enclosed airbox cold air intake this is right where I would

expect it to be and it's in line with some of the other brands that we have available.

As you can see, this cold air intake comes in a couple of different pieces and, like

I said, one of those is the fully enclosed airbox.

What an airbox like this is designed to do is draw the coldest possible air into the

engine for a box that is still in the engine bay.

I say that because you're still going to be drawing air that's underneath the hood that

has been warmed up from the engine giving off heat.

The only way to get truly cold, fresh air into the engine would be a snorkel or something

like a Ram Air setup that is available on the site.

However, this is going to do a nice job of drawing cold air and getting more air into

the engine than that factory system would.

Aside from the enclosed box, you of course have your cold air intake tubing and filter.

As I mentioned before, there are a couple of different filter choices available.

The SynthaMax filter from Airaid is a little bit more expensive than their premium filter

and it has less cotton gauze in it.

It is designed to filter out even smaller particulate.

But, if you want to save a little bit of money or you're not as concerned about the filtration

qualities, you can go with the premium filter.

Still a great filter, it just has a little bit more of the cotton gauze inside of it.

This system is designed to be mostly bolt-in.

You don't have to cut the Jeep, but you do have to cut up your factory airbox.

You're going to remove the factory air scoop and put it onto this airbox.

Part of the reason that you have to do that is because this is a 50-state legal system

so it can be used in California, so there are a couple of more restrictions that need

to be taken into account.

As I said before, I am going to call this a two out of three wrench installation.

Generally a cold air intake, especially one that is not an enclosed airbox like this one

is, is a very, very simple install.

This is going to be a little bit more difficult, and we're calling it a two out of three wrenches

because of the cutting you'll have to do on your factory airbox to remove that factory

air scoop and attach it to the new box.

The first step is, of course, removing the engine cover and removing all of your factory

air intake system.

That will include disconnecting the air temperature sensor and the crank case vent.

Once the old system is out of the way you can start assembling your new system.

There are a couple of brackets and plates that you'll install onto the box.

Of course, this does come with all of the hardware and connectors as well as the clamps

that you're going to need to get it installed.

Once you've gotten as far as you can with this on the bench you'll go ahead and mark

and cut your factory airbox, remove that airbox scoop and mount it on your new box.

From there it's just a matter of getting this all into the Jeep.

You will have to change out a couple of grommets that hold that factory airbox into place to

accept your new larger airbox.

You'll also have to change out a couple of the clips on that engine cover because that

does sit over top of the airbox as well.

The whole installation is not a difficult one and it should take you less than two hours,

however there is a little bit of cutting that is involved as I mentioned before.

So, this isn't something that you're going to be able to easily swap your factory airbox

back in again if you ever decide to go back.

You will have already cut up that factory airbox and it won't be of any use to you anymore.

To get this installed you are going to need some traditional hand tools and you are going

to need a Dremel or something that can cut plastic in order to remove that air scoop

from the factory box.

I mentioned before as far as a fully enclosed airbox cold air intake system goes this is

right around where I would expect it to be.

There are some that are a couple of dollars more, a couple of dollars less.

Some of those ones have some more features.

For instance, because this is an enclosed airbox, inspecting the filter can be a little

bit difficult.

Some of the systems on the market actually have an indicator.

They use vacuum to tell you when your filter is starting to get clogged up.

But, you do pay for those additional features.

So, it comes down to your budget and what you want for your Jeep.

Airaid has been around for a good long time in the cold air intake space and they do make

a pretty good product.

If you're looking for a cold air intake to install on your Jeep that is going to draw

some of the coldest possible air from underneath the hood and possibly give you a little more

throttle response, some more noise from underneath the hood and a few more miles per gallon as

well as a little bit more power at the top of the RPM range, this is going to be a nice

kit.

This is going to be slightly less expensive than, say, the Injen system, but again that

does have a few more features.

Overall, I would say that this is a really nice choice for an enclosed airbox cold air

intake system.

That's my review of the Airaid MXP Series cold air intake system fitting all 2012 and

up JKs that you can find right here at extremeterrain.com.

For more infomation >> Jeep Wrangler Airaid MXP Series Cold Air Intake - SynthaFlow Filter (2012-2017 JK) Review & Install - Duration: 6:56.

-------------------------------------------

Ruth B. Looks Back On Her Growth From Vine To Lost Boy - Duration: 3:15.

I remember the first time I saw or heard of Vine,

this girl in my Bio class was like taking six second

videos running around and I was like "What in the

world is she doing?"

And I was like "Holly what is that?"

She's like "It's Vine, you haven't heard of it?"

And I didn't think much of it and then I went and

downloaded it the next day and for about a year I

kinda just used to for fun and just to see what other

people were posting.

And then eventually I decided to post a six

second snippet of me singing and that kind of

was the first step in me realizing "Oh wait maybe I

can use this for something more than just when I'm bored"

I believe that the first song was "Just Hold

on We're Going Home" by Drake and I remember I had

like thirty followers that were all like my school friends.

And then the next day I woke up and I had a

thousand and I was freaking out.

Like I was literally going insane and I remember

being like "Okay I'm gonna sing on here from now on"

The first cover that I did that got me a lot of

attention was a song actually by, I don't

know how to say their name but like "Rae Sremmurd"

...the guys that do "Black Beetles" But it was their

song "No Flex Zone" and yeah I made a little beat

to it and caught six seconds of it and I

remember that one was like...got a lot of

comments and yeah...

So I think it was about two years ago, I was

watching a TV show called Once Upon a Time and

that's where it all started and the season that I

was watching was all about Peter Pan.

I had been getting into the groove of making up

these six second covers and so I was kinda just

singing a bunch of different lines and one of

the lines that I sang was "I am a lost boy from

Neverland usually hanging out with Peter Pan"

and I caught it on my phone and I kept it just in my saved

Vines for like a week and I was gonna delete it a

week later but I was like "You know what, this is

kinda catchy" so I posted it and that was kinda the

very beginning of "Lost Boy" And then all the

comments were people telling me "We wanna hear

more" and that's why, for a week I would just add a

new line every day.

Eventually I had a chorus and that's kinda when I

was like "I should probably write this"

When people reacted to it I knew they were reacting to

something that I had made versus something I was

just singing and that really got me to fall in

love with writing my own music.

I was nice to see that shift from like just a

Viner to a songwriter as well.

And it was really cool to see people finding meaning

in my words, like that was the biggest thing for me

above anything.

Was anytime I would read a comment that was like

"Wow I get this" or "This song makes sense to me"

Like that was the most insane incredible thing to me

and it still it.

Songwriting for me has become a really unique thing.

In the beginning when I first started writing it

would kind of be like, come up with a line or come up

with a title and write around that but now it's

kind of, whatever inspiration hits me,

I could be walking down the street and see a look on

someone's face and that could spark an idea or

something I actually go through, a conversation I

have with my friends.

And I think Vine really impacted me in terms of

just being creative cause when you use Vine you only

had six seconds.

So you wanted it to be as possible.

So I think I try to inf6use that mentality in my

writing now.

I want every line to be as impactful and as

meaningful and I don't ever wanna write something

just to write it.

Like I want every single line that I sing to mean

something to someone.

For more infomation >> Ruth B. Looks Back On Her Growth From Vine To Lost Boy - Duration: 3:15.

-------------------------------------------

'Natasha, Pierre & The Great Comet Of 1812' Lead Tony Nominations - Duration: 0:51.

IN MOST OF MISSOURI AND MORE

RAIN IS EXPECTED BY TOMORROW.

BROADWAY IS A BUZZ THIS MORNING

ABOUT THE TONY NOMINATIONS

REVEALED A FEW HOURS AGO AND ONE

MUSICAL IS LEADING THE WAY.

SHARON: NATASHA PR AND THE GREAT

COMMENT OF 1812 HAS 12 KNOTS.

IT STARS JOSH GROGAN IN HIS

ROADWAY DEBUT.

HERE IS THE COMPETITION IT

FACES.

COME FROM AWAY, DEAR EVAN HANSEN

AND GROUNDHOG DAY.

YOU CAN WATCH THE TONY AWARDS

RIGHT HERE ON CBS 2 ON SUNDAY,

JUNE 11 AT 8:00 P.M.

For more infomation >> 'Natasha, Pierre & The Great Comet Of 1812' Lead Tony Nominations - Duration: 0:51.

-------------------------------------------

nanoHUB-U Nanophotonic Modeling L3.19: Plasmonic Nanoparticle Light Trapping - Duration: 3:23.

[Slide 1] Hey everyone.

Welcome to Lecture 3.19.

So, in the last lecture, we were just talking about how we can model different

experimentally observed plasmonic light trapping structures for

crystal and silicon photovoltaics and so now,

we're actually going to explore more details of how we can fully understand and

then optimize these sort of light trapping structures.

[Slide 2] And so this is kind of quantifying what is the enhancement of

absorption associated with adding the silver nano-particles which we identified

last time as the most promising type of structure for enhancing absorption.

And you can see that with the nanoparticle, we can have

absorption up to 65% at wavelengths that are very close to the band edge because of

this extraordinary field enhancement and confinements.

Whereas, if you did not have this sort of light trapping then it's

almost an order magnitude weaker absorption.

So you basically increase from 10% up to 65% with the assorted nanoparticle.

[Slide 3] And so, then, just zooming in again on the field enhancement,

you can see that the field enhancement, with the nanoparticle, it's like this.

Without the nanoparticle, it's actually like quarters magnitude smaller.

[Slide 4] So this is like really strong, significant effect and

so another way to look at it kind of zoomed out from the previous picture.

It kind of looks like this and so

you can see that there's a big enhancement over the whole volume of the crystalline

silicon which might be like two microns thick.

[Slide 5] And then, if you look at this as a function of texturing height,

then you can see that, actually, with the plasmonic nanoparticle,

especially for very short structures, that there's a marked improvement.

But then the gap kind of closes as you increase the height

to a large enough value.

So, that indicates that over the whole spectrum,

it may not be extremely beneficial for a very thick structure.

So, say, like a crystalline silicon wafer.

But then or a crystalline silicon thin film where texture heights are limited

to less than one micron, then this could actually be a big benefit, or a big boost.

[Slide 6] And so just to kind of visualize like what kind of outputs you got from these sort of

systems, again you have the parasitic loss,

quantified as basically subtracting 3.7 from the ultimate JSC that's possible.

And then of course you have some reflection losses of

about 5 mA per square centimeter, but you are still left with a surprisingly large

value of 36.6 mA per square centimeter,

which of course is below kind of the maximum theoretical value.

for silicon.

But it actually comes not too far away from some of the world record

wafer based crystalline silicon cells.

So that says at least in principle this sort of light trapping could allow you

to reproduce the performance of

crystalline silicon wafer based cell with much less silicon.

[Slide 7] This is just showing like what the texture looks like for the system.

For more infomation >> nanoHUB-U Nanophotonic Modeling L3.19: Plasmonic Nanoparticle Light Trapping - Duration: 3:23.

-------------------------------------------

Ruth B. Looks Back On Her Growth From Vine To Lost Boy - Duration: 3:15.

I remember the first time I saw or heard of Vine,

this girl in my Bio class was like taking six second

videos running around and I was like "What in the

world is she doing?"

And I was like "Holly what is that?"

She's like "It's Vine, you haven't heard of it?"

And I didn't think much of it and then I went and

downloaded it the next day and for about a year I

kinda just used to for fun and just to see what other

people were posting.

And then eventually I decided to post a six

second snippet of me singing and that kind of

was the first step in me realizing "Oh wait maybe I

can use this for something more than just when I'm bored"

I believe that the first song was "Just Hold

on We're Going Home" by Drake and I remember I had

like thirty followers that were all like my school friends.

And then the next day I woke up and I had a

thousand and I was freaking out.

Like I was literally going insane and I remember

being like "Okay I'm gonna sing on here from now on"

The first cover that I did that got me a lot of

attention was a song actually by, I don't

know how to say their name but like "Rae Sremmurd"

...the guys that do "Black Beetles" But it was their

song "No Flex Zone" and yeah I made a little beat

to it and caught six seconds of it and I

remember that one was like...got a lot of

comments and yeah...

So I think it was about two years ago, I was

watching a TV show called Once Upon a Time and

that's where it all started and the season that I

was watching was all about Peter Pan.

I had been getting into the groove of making up

these six second covers and so I was kinda just

singing a bunch of different lines and one of

the lines that I sang was "I am a lost boy from

Neverland usually hanging out with Peter Pan"

and I caught it on my phone and I kept it just in my saved

Vines for like a week and I was gonna delete it a

week later but I was like "You know what, this is

kinda catchy" so I posted it and that was kinda the

very beginning of "Lost Boy" And then all the

comments were people telling me "We wanna hear

more" and that's why, for a week I would just add a

new line every day.

Eventually I had a chorus and that's kinda when I

was like "I should probably write this"

When people reacted to it I knew they were reacting to

something that I had made versus something I was

just singing and that really got me to fall in

love with writing my own music.

I was nice to see that shift from like just a

Viner to a songwriter as well.

And it was really cool to see people finding meaning

in my words, like that was the biggest thing for me

above anything.

Was anytime I would read a comment that was like

"Wow I get this" or "This song makes sense to me"

Like that was the most insane incredible thing to me

and it still it.

Songwriting for me has become a really unique thing.

In the beginning when I first started writing it

would kind of be like, come up with a line or come up

with a title and write around that but now it's

kind of, whatever inspiration hits me,

I could be walking down the street and see a look on

someone's face and that could spark an idea or

something I actually go through, a conversation I

have with my friends.

And I think Vine really impacted me in terms of

just being creative cause when you use Vine you only

had six seconds.

So you wanted it to be as possible.

So I think I try to inf6use that mentality in my

writing now.

I want every line to be as impactful and as

meaningful and I don't ever wanna write something

just to write it.

Like I want every single line that I sing to mean

something to someone.

For more infomation >> Ruth B. Looks Back On Her Growth From Vine To Lost Boy - Duration: 3:15.

-------------------------------------------

Comment réussir un régime sain ? - Duration: 7:31.

For more infomation >> Comment réussir un régime sain ? - Duration: 7:31.

-------------------------------------------

Avoid These 7 Foods to Remove Joint Pain Overnight Joint and Knee Pain Relief - Duration: 4:24.

For more infomation >> Avoid These 7 Foods to Remove Joint Pain Overnight Joint and Knee Pain Relief - Duration: 4:24.

-------------------------------------------

Diorshow Pump'N'Volume - Peter Philips' interview - Duration: 1:40.

the idea was to make the impossible possible

make possible for women to apply a mascara which is very rich

and creates really thick fat lashes

without clumping, like I can do when I'm backstage

by pumping you soften the formula and get a creamy volumizing effect

that creates those really rich fat lashes without clumping

Extra extra-large lashes, I start my routine

by using the Dior Show Maximizer in 3D then I pump the volume

I squeeze, apply zig zagging to get all the lashes coated from roots till tips

Bella is a girl that looks great and confident without

and she can transform herself become this amazing idealized, version

of a girl, by applying make-up, by playing with hair

by styling, she just loves to be a girl

Divine

Petillante

Real

which was great about this campaign, is that we actually

shot a part of the campaign in real backstage and which gives a totally different

dimension and vibration to the whole concept of the campaign

In this new palette, we've combined

different textures with different pigmentations, and they give just gorgeous harmonies to play with

you can go from a very natural makeup look to a very bold makeup result

it can seem complicated but it's a very easy palette actually

it's literally something eye catching that helps your eyes speak

For more infomation >> Diorshow Pump'N'Volume - Peter Philips' interview - Duration: 1:40.

-------------------------------------------

For more infomation >> Diorshow Pump'N'Volume - Peter Philips' interview - Duration: 1:40.

-------------------------------------------

Elections FR (2e tour) | Episode 04 - Duration: 1:51.

For more infomation >> Elections FR (2e tour) | Episode 04 - Duration: 1:51.

-------------------------------------------

For more infomation >> Elections FR (2e tour) | Episode 04 - Duration: 1:51.

-------------------------------------------

Quand Aelmel se prononce en tant que Empereur Dieu - Duration: 2:24.

For more infomation >> Quand Aelmel se prononce en tant que Empereur Dieu - Duration: 2:24.

-------------------------------------------

For more infomation >> Quand Aelmel se prononce en tant que Empereur Dieu - Duration: 2:24.

-------------------------------------------

Lightnin' Hop Rock 'N' Roll Dance Party - Duration: 3:42.

LIGHTNING CHARLIE, HIS WIFE

BETH AND JIM ARE JOINING US

THIS MORNING, THANK YOU FOR

JOINING US.

THANK YOU FOR LETTING US BE

HERE.

LIGHTNING CHARLIE NOT ONLY

DO YOU PROVIDE THE BEST

ENTERTAINMENT AROUND. OH STOP

.

YOU DOING A FUN EVENT ON MAY

5.

IT IS GOING TO BE A LOT OF

FUN AND WE CALL IT THE

LIGHTNING HUB, JUNE NAMED IT,

THE ROCK 'N ROLL DANCE PARTY AT

THE JOHNSON CITY SENIOR CENTER

ON MAY 5 AT SEVEN, WE'RE

LOOKING FORWARD TO IT IS RIGHT

UP MY ALLEY MUSICAL 50s AND 60s.

IT IS LIKE A SAW COP.

WE ENCOURAGE EVERYONE TO

DRESS THE 50s AND 60s THAT THEY

CAN FIND, AND THE THEME AND

EVERYTHING INSIDE AND

DECORATIONS ARE ALL 50s. JIM

I UNDERSTAND YOU ARE THE ONE

WHO GOT LIGHTNING CHARLIE AND

HIS WIFE OVER TO THE SENIOR

CENTER AND WHY LIGHTNING

CHARLIE?

WE HEARD ABOUT HIM AND WE

GOT TOGETHER AND STARTED

TALKING.

I FOUND OUT RIGHT AWAY HE WAS

FAMILIAR WITH THE DELTA BLUES

WHICH IS WHERE I CAME FROM.

PERFECT, IT WAS MEANT TO BE.

FROM THEN ON IT WAS A GREAT

FRIENDSHIP.

JIM WE WILL LET LIGHTNING

CHARLIE AND BETH SING A FEW

SONGS, CANNOT WAIT. GO AHEAD

AND TAKE IT AWAY.

WELL HELLO MARY LOU, GOODBYE

HEART, SWEET MARY LOU I'M SO IN

LOVE WITH YOU.

I DO MARY LOU, WE NEVER PART SO

HELLO MARY LOU GOODBYE HEART.

YOU ASKED ME BY ONE SUNNY DAY,

YOU PAST THOSE BIG BROWN EYES

MY WAY AND I WANTED YOU FOREVER

MORE.

I AM NOT ONE WHO GETS AROUND, I

SWEAR MY FEET IS STUCK TO THE

GROUND AND I NEVER DIDN'T NEED

YOU BEFORE.

I SAID HELLO MARY YOU, GOODBYE

HEART. SWEET MARY LOU I AM SO

IN LOVE WITH YOU.

Y'ALL CAN CLAP.

I DO MARY LOU, WE'D NEVER PART

SO HELLO MARY LOU GOODBYE HEART.

I SAW YOUR LIPS, I HEARD YOUR

VOICE, BELIEVE ME I JUST HAD NO

CHOICE, WILD HORSES COULD NOT

MAKE ME STAY AWAY.

I THOUGHT ABOUT A MOONLIT NIGHT

, ARMS AROUND YOU GOOD AND TIGHT

, THAT IS ALL I HAD TO SEE FOR

ME TO SAY.

HEY, HELLO MARY LOU, GOODBYE

HEART, SWEET MARY LOU I AM SO

IN LOVE WITH YOU.

I DO MARY LOU, WE WOULD NEVER

PART, SO HELLO MARY LOU,

GOODBYE HEART.

YES HELLO MARY LOU GOODBYE HEART

. YES HELLO MARY LOU GOODBYE

For more infomation >> Lightnin' Hop Rock 'N' Roll Dance Party - Duration: 3:42.

-------------------------------------------

For more infomation >> Lightnin' Hop Rock 'N' Roll Dance Party - Duration: 3:42.

-------------------------------------------

Comment réussir un régime sain ? - Duration: 7:31.

For more infomation >> Comment réussir un régime sain ? - Duration: 7:31.

-------------------------------------------

For more infomation >> Comment réussir un régime sain ? - Duration: 7:31.

-------------------------------------------

Yooka Laylee Part 18 - Tentacle Fun - Duration: 21:36.

Time for another arcade game, not too thrilled about it but whatever

That was worse than the last one, Joust is fun and all but not THAT fun lol

Best minecart track, worse arcade machine...what?

I am so wet right now for this tentacle monster to ravage me...

This world is almost perfect so far, great atmosphere, layout is decent, transformation is so cool, minecart was awesome, boss made me want to touch myself *wink* lol, and the arcade...not so much fun

But with that, stay beautiful <3 cya

For more infomation >> Yooka Laylee Part 18 - Tentacle Fun - Duration: 21:36.

-------------------------------------------

For more infomation >> Yooka Laylee Part 18 - Tentacle Fun - Duration: 21:36.

-------------------------------------------

m-Fin How To: Creating Report Views in CU-Data - Duration: 1:48.

Do you regularly run reports for the same SpeedTypes?

With CU-Data you can save report outputs and pre-set values, sparing you time and effort.

Here's how it works…

First -- run the report that you want to save.

When the report displays, click the Add this Report icon on the top left of your screen.

It's the one that looks like a floppy disk

Select Save report as report view from the drop down.

A popup window will appear.

If you like -- you can change the default name of this Report View

In any case, choose Select My Folders as the location.

Then click OK.

When you want to revisit your Report View, click My Content from the navigation menu.

Clicking directly on the Report View name in this folder will re-display the report

with all the same parameters you entered when you first saved it.

Clicking on the Run As icon in the report will re-prompt for a new period or other change

Would you rather always land on the prompt page for your Report View?

You can take a few simple steps now to ensure you always land on the prompt page

Instead of clicking on the Report View name, click on the three dots to the right of it.

Then, select View Versions

Click on the date and EN-US will appear just below.

Now, click on the trash icon and then click OK on the Confirm Delete popup.

This will delete the report output version that had previously saved.

And now … when you click the Report View from the My Content folder, you'll go

straight to your saved prompt page!

For more videos and answers to your questions, visit the Fin-Pro helpdesk website.

For more infomation >> m-Fin How To: Creating Report Views in CU-Data - Duration: 1:48.

-------------------------------------------

m-Fin How To: Running Reports in CU-Data - Duration: 1:32.

Are you ready to run a report in the upgraded CU Reporting System?

The navigation has changed a bit, but you'll find the prompts and m-Fin reports are essentially

the same!

Here's how it works:

Log in to the system using your campus portal and click Reporting and Compliance, CU-Data.

This will take you to the CU-Data homepage.

You have two ways to find a report.

You can use the Search icon and type a keyword such as operating for Operating Summary - select

the report Or you can click the Team Content folder and

select Finance.

A list of reports will appear in alphabetical order - select the report

Enter your report prompts and click Finish to run.

Want to re-run the report with different parameters?

Click the Run As icon in the upper left.

then select Reset prompts and run.

Want a different format?

Click the Run As icon and select the format you prefer:

PDF … Excel ...Excel data … or CSV.

If you want to print a fully formatted report, it's helpful to run the report to PDF.

Want to drill for additional detail?

Click on any of the blue hyperlinked values …

The resulting data will generally display in the same tab.

For more videos and answers to your questions, visit the fin-pro helpdesk website.

For more infomation >> m-Fin How To: Running Reports in CU-Data - Duration: 1:32.

-------------------------------------------

m-Fin How To: Drilling Down in CU-Data - Duration: 1:07.

Do you run m-Fin reports and want to know about what's behind the numbers?

Whenever text is underlined in blue, you can click on it to run the m-Fin report that shows

the next level of detail.

Here's how it works: First, run your report.

Here, we've run the m-Fin operating summary.

Notice all the amounts in blue?

Go ahead and click on an amount.

A new report opens in the same tab.

In this instance, it's the m-Fin financial detail.

If you like, you can drill down even further by clicking on any of the source codes or

journal IDs.

These drills function just like your original report.

You can run them to different formats using the Run-As icon, reset prompt values, or print

fully formatted versions.

To go back to your original report, click the previous report icon on the top-left of

your screen.

Don't use your browsers back-button for this.

For more videos and answers to your questions, visit the fin-pro helpdesk website.

For more infomation >> m-Fin How To: Drilling Down in CU-Data - Duration: 1:07.

-------------------------------------------

Volkswagen Polo 1.2 TDI Bl.M. Comfl. - Duration: 0:55.

For more infomation >> Volkswagen Polo 1.2 TDI Bl.M. Comfl. - Duration: 0:55.

-------------------------------------------

Αχ, χελιδόνι μου/Ah, helidoni mou - Χάρις Αλεξίου/Haris Alexiou (2007) - Duration: 3:21.

Ach my swallow, how can you fly

in this blackened sky?

the sunset is dripping blood

and how will you cry, how will you cry,

ach my swallow.

Ach my palikari, the trains have left,

there is no road to leave the country,

and those who spoke of liberation,

tell me where they went, tell me where they went,

ach my palikari.

Ach my dear little heart, imprisonned,

the sun you are awaiting does not come,

only the town-crier in the market-place

deafens you, he deafens you,

ach my poor little heart.

For more infomation >> Αχ, χελιδόνι μου/Ah, helidoni mou - Χάρις Αλεξίου/Haris Alexiou (2007) - Duration: 3:21.

-------------------------------------------

Selling Fidget Spinner Toys at School - Duration: 3:09.

Today I want to tell you a short story about selling fidget spinners in school and the kids who think they're getting ripped off.

Welcome back to CapOhTV, the channel where we know school is a joke and you don't want to be the punchline.

If this is your first time here and you also think school is a joke and you want to take back control of your education,

then hit that subscribe button now.

These little spinners are SUPER popular right now and I see them every day when I'm substitute teaching.

They're also SUPER sold-out in most locations.

You see, these things are cheap to make. You can get them wholesale for $1.60 a piece if you buy them in a pack of 20.

And in a retail store, they sell for $5 to $6.

Well, it turns out that there is a kid in the high school that I substitute in for $8.

That doesn't seem like a bad deal.

In fact, I paid $7 and 80 cents for this one off Amazon because it was the only one I could find that was in stock with Prime shipping.

But, apparently, high school kids don't understand the concept of supply and demand.

A few people bought these for $8 from this one kid. Let's call him Billy.

Billy was smart enough to realize, "Hey, if I buy these for $5 at my local Walgreens (or wherever he got them),

then I can sell them for a few dollars more to kids at school and make a little money.

And these other kids were happy to buy it for $8 and spin the spinner in class and distract themselves from real work and

cause a lot of arguments over who gets to play with the spinner next!

But when they found out that they could buy these for $5 at Walgreens and they paid $8 to Billy,

they got upset and they said Billy ripped them off, they said Billy was trying to take advantage of them.

My response to them was "No, he didn't!"

Do you know how much the shirt you're wearing cost to make and to ship and to get into the store so that you could buy it?

It probably cost them eight... nine dollars.

And you paid maybe $20 for it!

You don't have any problem with that, do you?

That's called profit margin, that's called running a business.

And little Billy here is a little entrepreneur and he realized if these are sold out everywhere and I've got a few extra of them,

then I can make some money

There's nothing wrong with that!

The lesson here is: buy low, sell high, recognize an opportunity when it's right in front of you.

Now, with that said, these will be banned in most schools very shortly.

They're just another distraction from the meaningless work that you're asked to do every day.

And the school can't stand for that!

So, if you happen to be sitting on a bunch of fidget spinners that you bought for a cheap price,

then go to school, set up shop, just don't get caught.

You can make a lot of money!

Are you part of the fidget spinner craze? Leave a comment down below, let me know what you think about them!

And if this was your first time here to CapOhTV and you also think school is a joke and you want to take back control of your education,

then his that subscribe button now!

Thanks for watching, see you later, BYE!

For more infomation >> Selling Fidget Spinner Toys at School - Duration: 3:09.

-------------------------------------------

Jesse Watters Stuns With Sudden Announcement After Ivanka 'Blow Jb' Joke - Duration: 4:09.

Jesse Watters Stuns With Sudden Announcement After Ivanka 'Blow Jb' Joke

Fox News Channel (FNC) commentator Jesse Watters received a sizable promotion when his longtime

mentor, Bill O'Reilly, was let go over sexual harassment allegations last week.

Now a full-time co-host on The Five, Watters' new stint is already off to a rocky start.

Following his seemingly inappropriate joke about President Donald Trump's daughter

Ivanka, he stunned fans with another sudden announcement they didn't see coming.

On Tuesday, Watters shocked Fox's audience with what seemed to be a sex joke about Ivanka,

whose first job as an official advisor to her father's administration was to take

part in a women's summit in Germany.

During a segment on Tuesday night, Watters remarked on the way that Trump held a microphone

while she discussed women's rights at a panel in Germany.

"It's funny.

The left says they really respect women and then when given an opportunity to respect

a woman like that they boo and hiss … so I don't really get what's going on here,

but I really liked how she was speaking into that microphone," Watters said.

Watters gestured with his hand toward his mouth as he made the remark and then grinned

at his co-hosts.

The next morning, Watters said his comment was not meant to be sexual innuendo.

"During the break, we were commenting on Ivanka's voice and how it was low and steady

and resonates like a smooth jazz radio DJ," he said.

"This was in no way a joke about anything else."

[Source: The Hill] It appeared that no one was buying Watters' explanation for the

comment, and just one day later, he made a surprising announcement.

"I'm going to be taking a vacation with my family, so I'm not going to be here tomorrow,"

Watters said on Wednesday.

"I'll be back on Monday, so don't miss me too much."

It certainly seems odd to be taking a vacation just days into a brand new job, especially

one which offered such a substantial promotion.

Also of note is the fact that O'Reilly announced a sudden getaway of his own amid the harassment

scandal, and the network decided to part ways with him in the coming days.

In fact, the star anchor was with his family in Italy when he received the news that his

decades-long career at Fox had come to an end.

This is not the first time Watters has come under fire for controversial comments, either.

Watters has in the past made controversial remarks.

During the 2016 presidential election, he was accused of racially stereotyping Asian-Americans

in a TV segment in which he asked them whether it was the "year of the dragon" and whether

they knew karate.

[Source: Business Insider]

As FNC continues to overhaul its image and replace many of its longstanding talents with

fresh faces, it isn't brash to consider the fact that Watters may be out of a job

in a short time.

With the left on the offensive, constantly finding any opportunity to attack the right-leaning

network with allegations of sexual harassment and misogyny, network executive are of the

mindset that they simply cannot afford to take any chances with their on-air personalities.

Indeed, there is a new culture being ushered in at Fox, and it remains to be seen whether

Watters will be a part of it.

For more infomation >> Jesse Watters Stuns With Sudden Announcement After Ivanka 'Blow Jb' Joke - Duration: 4:09.

-------------------------------------------

"Turtle Soup" / Beautiful Soup (Ukulele Cover) - Duration: 1:41.

Beautiful Soup, so rich and green, Waiting in a hot tureen!

Who for such dainties would not stoop?

Soup of the evening, beautiful Soup!

Soup of the evening, beautiful Soup!

Beau--ootiful Soo--oop!

Beau--ootiful Soo--oop!

Soo--oop of the e--e--evening, Beautiful, beautiful Soup!

Beautiful Soup!

Who cares for fish, Game or any other dish?

Who would not give all else for two p ennyworth only of Beautiful Soup?

Pennyworth only of beautiful Soup?

Beau--ootiful Soo--oop!

Beau--ootiful Soo--oop!

Soo--oop of the e--e--evening, Beautiful, beauti--FUL SOUP!

Beau--ootiful Soo--oop!

Beau--ootiful Soo--oop!

Soo--oop of the e--e--evening, Beautiful, beautiful Soup!

For more infomation >> "Turtle Soup" / Beautiful Soup (Ukulele Cover) - Duration: 1:41.

-------------------------------------------

Donald Trump The Snake Poem Opinion Reacting to My Old Videos Teresa - Duration: 5:14.

hi YouTube okay we are reciting the

snake we're actually reviewing my old

video and I told you guys that I thought

Donald Trump

I took the snake and applied it to him

in America he seems to think he's

applying it to people coming in

immigration I'm applying it to him so

this is what you do you read through the

poem and I'm going to read through the

poem for you guys now the last time I

changed it a little bit so you can see

on this video here I changed some of the

word this time I'm going to read it so

you guys can hear it and understand it

straight from how it is okay here we go

on her way to work one morning down the

path alongside the lake a tender-hearted

woman saw a poor half frozen snake his

pretty colored skin had been all frosted

with the dew poor thing she cried I'll

take you in I'll take care of you take

me in tender woman take me in for

heaven's sake take me in tender woman

sighed the snake she wrapped him up all

cozy in a comforter of silk and laid him

by her fireside with some honey and some

milk she hurried home from work that

night and soon as she arrived she found

that pretty snake she'd taken to have

been revived take me in tender woman

take me in for heaven's sake take me in

tender woman side the snake she clutched

him to her boosom you're so beautiful

she cried but if I hadn't brought you it

by now you might have died she stroked

his pretty skin again and kissed him and

held him tight instead of saying thanks

the snake gave her a vicious bite take

me a tender woman take me in for

heaven's sake take me in tender woman

sighed the snake I saved you cried the

woman and you bitten me but why you know

your bite is poisonous and now I'm going

to die oh shut up silly woman said the

reptile with a grin you knew damn well I

was a snake before you took me in take

me in tender woman take me in for

heaven's sake

take me in tender woman sighed the snake

and so you see that's Donald Trump right

there when you think of the part when it

says oh shut up silly woman said the

reptile with a grin and so look at

Trump's like reptile and grin he's got

his orange reptile face and so that's

Trump all all through here is is he's

talking about himself he's the snake so

he's saying America as in she voted him

in and so now now he just I guess he

thinks he can be it I don't know what

you'd call it dictator maybe I don't

know

and so yeah but anyway over here is my true colors video

so here we go

on her way to work one morning down the path along side the lake

a tender hearted woman saw a half frozen donald trump

his pretty color orange skin had been all frosted in the dew

poor thing she cried i'll take you in i'll take care of you

take me in tender woman take me in for heavens sake

take me in tender woman sighed the orange donald trump

she wrapped him up all cozy in a comforter of silk

and laid him by her fireside with some honey and some milk

Trump decided to skip the White House

Correspondents Dinner and so you can see

here he well it's kind of like if if

people are going to say things he

doesn't want to hear he just kind of

isolates himself off somewhere else and

that's kind of this division that we

have in this country too and he kind of

tapped into that and because he knew it

existed because they you know created it

with the well the past rhetoric

anyway but yeah that's just what I

wanted to say about that particular

video in this you know now he's reading

it as president he read the snake as

president he's telling the United States

who he is he's the snake people voted

Donald Trump as president voted Donald

Trump

into the United States as president and

he's the snake that's why he's reading

this this poem by Al Wilson that's why

he's reading the lyrics because he's the

snake and and he's telling you so and so

you know when when someone tells you who

they are believe them and and so yes

yeah I can't think of anything else

right now this is what I would like I

would like for you guys to subscribe and

ring my bell ring my bell follow me on

YouTube and ringing the bell will send

you emails and notifications and things

like that I want to thank you so much

for watching please thumbs up this video

share it with your friends leave

comments suggestions ideas I'll see you

soon peace love and avocados

For more infomation >> Donald Trump The Snake Poem Opinion Reacting to My Old Videos Teresa - Duration: 5:14.

-------------------------------------------

Geology Field Trip 2017 - Duration: 1:05.

My name is Daniela.

We are going on a field trip

With the Earth and Ocean Sciences

You learn something in class

like the technical part

but it's very different to see the real thing.

You actually know how to recognize the rocks.

so it is very interesting.

I would like to study biology.

Earth and ocean was approaching towards the biological,

and the nature, and the weather.

Knowing about how the air forms.

Before this class,

I usually watch rocks and was like "mehh,

it doesn't matter"

but now it's like "oooh! That's an igneous rock,

that's a sedimentary rock"

and it's very cool to know more about

that, and not just see beautiful landscapes

It's more like, some

interesting and mysterious process happened.

For more infomation >> Geology Field Trip 2017 - Duration: 1:05.

-------------------------------------------

Comment réussir un régime sain ? - Duration: 7:31.

For more infomation >> Comment réussir un régime sain ? - Duration: 7:31.

-------------------------------------------

Selling Investment Real Estate Denver - Duration: 4:05.

- [Chris] Chris Lopez here

with DenverInvestmentRealEstate.com

and I have Charles Roberts sitting next to me.

And Charles, I've heard you half jokingly,

half seriously a couple times

say sometimes you're not the best real estate agent

'cause you've actually talked a lot of clients

out of selling their investment property.

So, fill that in.

- [Charles] So, my clients bought literally hundreds

of properties during the downturn 2008 to 2011.

They've still been buying since then but, boy,

do we close a lot of properties there.

So probably every couple of weeks, two or three weeks,

I'll get a client who calls me and says, "You know what,

I want to sell my properties."

And I'll say, "Great, and I'd love to help you sell them",

but let me at least first ask, like,

why do you want to sell?

I like to be able to challenge my friends, my colleagues,

my clients and see what they are thinking.

And really what it comes down to

is often times they'll say, "Well, the market's been up

for a while, I think we're at the top."

And we'll talk about that.

And the truth is I don't personally agree.

In the last year I bought six more properties

from my portfolio and I would never pretend

that I can predict the market,

but I don't think anybody can predict the market,

and I think owning long-term property makes a lot of sense.

So, sometimes they'll decide to buy and sometimes

they'll say, "You know, I'm gonna hang on for a while,"

and let's see what they want to do.

Now, if they want to sell, then at that point

what we do is we talk about what the best way to sell it is.

So I'm a real estate agent and we have all of the tools

and all of the capability to be able to help them

sell their property for the easiest...

In the easiest situation

for the top price for the easiest hassle.

- [Chris] Okay, so I'm gonna kind of loop back around

to I'll say troubleshooting investors or clients

with those property, like, what are some

of the common issues that come up

where you've actually been able to help them

resolve the issue and keep the property

or turn them around from something they want to sell

like, wow, I'm glad I kept this, now it's performing?

- [Charles] So, for example, I might have

a client who had a bad tenant.

That would be the obvious one right there

and let me tell you, we've all had bad tenants.

If you've never actually owned real estate as an investment,

well, you haven't had a bad tenant, but everybody else has

sooner or later, we all understand that.

The bottom line it comes down to this,

if you're gonna own property, you're gonna make

a ton of money, you're gonna have some bad tenants.

We get paid very very well for having some tough situations

and I've got lots and lots of them.

So, let's say someone calls and said, "You know what,

I'm just done with this."

Great, they might be done with it, but I also might say,

well, let's talk about the situation:

Are you managing the property yourself?

Should you maybe get a property manager?

Do you have a property manager managing

and maybe you should be managing it yourself?

Maybe this wasn't the right property for you.

There's lots and lots of ways of looking at it

and the fact is maybe they're just done

and that's the way it should be.

But I think the message here is that you, me,

everybody wants to, or should want to talk,

with people who want to consult with them,

who want to ask them questions and hopefully,

arrive at whatever the right answer

and whatever that is is fine for them.

But it's interesting and it's fun

and hopefully it's helpful to be able to talk with people

and maybe solve some problems along the way.

- [Chris] So, if someone is sitting in this situation

should I just reach out to you and talk,

or, I mean, what would be the next step for you.

- [Charles] Yeah, I mean I really think so.

This is what I do 15 hours a day.

I run Your Castle Real Estate Live Urban Real Estate

and I work with investors and I buy and sell property myself

and this is kind of entertaining for people like me and you

to be able to talk to people, to reach out,

to have relationships with people and may be able

to help them with real estate or may be able

to point them in the right direction,

but I certainly invite people to, you know, come to our blog

or send us emails or reach out to us and say,

"Hey, I've got this problem.

Is this something that we can talk about?"

The answers gonna be yeah and maybe we can even help out.

- [Chris] Great, well if you wanna get in touch with us,

go to DenverInvestmentrealEstate.com/Consult

and you can get in touch with Charles or myself

or go check out our experts section.

You've got experts from all over the industry

in the Denver Real Estate market.

Feel free to reach out to them, as well.

For more infomation >> Selling Investment Real Estate Denver - Duration: 4:05.

-------------------------------------------

2017-05-02 Members' Statements - Duration: 15:16.

For more infomation >> 2017-05-02 Members' Statements - Duration: 15:16.

-------------------------------------------

Atualização do cPanel HostGator Brasil - Duration: 1:13.

For more infomation >> Atualização do cPanel HostGator Brasil - Duration: 1:13.

-------------------------------------------

2017-05-02 Déclarations des députés - Duration: 15:19.

For more infomation >> 2017-05-02 Déclarations des députés - Duration: 15:19.

-------------------------------------------

How difference about gay things japan and france - Duration: 5:50.

Hi It's ryan koike

today I'm gonna talk about how difference about japanese gay and french gay

at first Open relationships

I think most of all french gay couples are in a relationships

Open relationship means even if you have a boyfriend, you can date other people. also sex too

surprisingly it's not popular in Japan about relationships in gay couples.

and also gay marriage is not common

I can see who are married or in a open relationships

when i slept with people who are in a relationships

At first there was a feeling of guilt, but I felt it was reasonable to think it well

continue it, the relationship will keep for a longer time and it will be not hard to get bored

It becomes a new stimulus, you can have sex with 3some or 4 ...

So it turned out that there was a good side for each other

It is not easy to understand for me But i can feel it is better for majority

I thought it was a reasonable action

i want to try maybe..

second,On French people's lower body circumstances

I mean..its talk about penis lol

I thought bigger and there is no phimosis people in france

In fact, in my case...there are some people who are uncut and small

but it's not a lot than japanese, but i think more than 50% are uncut

and it's different phimosis compare to japanese

The Japanese phimosis is normally covered and it can be peeled off at the time of erection. French people sometimes do not get stuck when erecting.

and they feel hurts when i peeled that skin

it's hard to **ck

And they couldn't washed it by self , because of pain

so that's why....so smelly.........(not all people though)

And third thing is difference about gay apps

Japanese do not do much of direct wording, they often go to date or drink alcohol. sometime hungout

but I think westerners are more direct behavior

they start immediately send a message what are you looking for ? what your style about sex?

I think that there is a tendency to respect sexual preferences

They want to avoid inconsistencies of sex beforehand

Not much in Japan, but that is very reasonable

it's really not bad things

and also it's related about second thing(uncut) westerners are very care of face, body and genital pics

Because they have preferences, they want to prevent inconsistencies

afterward it getting easier matching to people

so..i wanna try that behavior when i back to japan

and i have already felt a lot of interesting things in here. but its my first time video so it ll be over soon this time

if you like this video,please subscribe and like so on!

For more infomation >> How difference about gay things japan and france - Duration: 5:50.

-------------------------------------------

Keep Balance - Labios Negros - Duration: 2:38.

For more infomation >> Keep Balance - Labios Negros - Duration: 2:38.

-------------------------------------------

[VOSTFR] A.C.E (Jason & Wow) x fla4free - K.A.R.D Don't Recall remix cover - Duration: 3:27.

For more infomation >> [VOSTFR] A.C.E (Jason & Wow) x fla4free - K.A.R.D Don't Recall remix cover - Duration: 3:27.

-------------------------------------------

How to Play Clash Royale Level 1😀 - Duration: 10:20.

Balloon is Very Well Played

For more infomation >> How to Play Clash Royale Level 1😀 - Duration: 10:20.

-------------------------------------------

Yooka Laylee Part 18 - Tentacle Fun - Duration: 21:36.

Time for another arcade game, not too thrilled about it but whatever

That was worse than the last one, Joust is fun and all but not THAT fun lol

Best minecart track, worse arcade machine...what?

I am so wet right now for this tentacle monster to ravage me...

This world is almost perfect so far, great atmosphere, layout is decent, transformation is so cool, minecart was awesome, boss made me want to touch myself *wink* lol, and the arcade...not so much fun

But with that, stay beautiful <3 cya

Không có nhận xét nào:

Đăng nhận xét