Youtube daily report Dec 25 2016

Ultimate North American Driving Fails Compilation

For more infomation >> Ultimate North American Driving Fails Compilation - 43 - Duration: 10:07.

-------------------------------------------

What is Chanukah? | Hannah Witton - Duration: 10:53.

For more infomation >> What is Chanukah? | Hannah Witton - Duration: 10:53.

-------------------------------------------

Economists Warn Of Dangers Of Surging Income Inequality - Duration: 4:15.

Economists from UC Berkeley as well as French economist Thomas Piketty have come forward

and said that there is an alarming trend in the United States that only seems to be getting

worse, and that trend is the income inequality between the top 1% and the bottom 99%.

Before we get into their analysis here, let me take you back about a year.

Bernie Sanders was getting trashed by the Hillary Clinton wing of the Democratic Party

for being such a one-trick pony.

All he talked about was income inequality and how bad it was, and how bad it was getting

and how bad it was going to get.

Man, that got tiring, right?

Well, as it turns out, he was right.

I mean, we all knew it was a big issue, but according to these economists it's actually

a lot worse than we thought and is going to be a major driver of an economic down term

in our very near future.

Here's what these economists found.

Let me read this.

"The average pre-tax income of adults in the bottom 50% income share in the US has stagnated

since 1980.

The bottom 50% share of income share has collapsed from about 20% in 1980 to 12% in 2014.

In 1980, the top 1% adults earned an average 27 times more than bottom 50% adults, while

they earn 81 times more today.

The share of women falls sharply as one moves up the income ladder, with only 11% in the

top 1% today."

The list goes on and on, folks, but these economists and Bernie Sanders are absolutely

right.

If we do not do something about income inequality in the United States, there really can't be

a United States.

Everything is driven by the economy, right?

I mean, the global economy, the US economy, markets and blah, blah, blah.

We're told everything now is just money, but what happens when the bottom 50% of Americans

don't have money?

We don't have money to spend.

We can't go out and buy cars.

We can't buy homes.

We can't rent homes.

We can't go on vacations.

We can't buy our children presents for the holidays or for their birthdays.

We can't go out to dinner.

You know what happens when those things start happening?

Automobile manufacturers shut down.

Restaurants shut down, start laying off workers, and then those workers can't afford to do

this.

It's the trickle-down effect and it's the only way that trickle-down works.

That's what these economists are warning us about.

The problem is getting so bad, the wealth concentration in the United States is getting

so bad, that it is going to drive another economic downturn in the United States that's

going to be worse than the one we saw in 2007-2008.

Really, the only people who can do something about this, there is limited power of what

the legislative and executive branches can do, but it's corporate leaders.

You have to pay people more, and if it takes the federal government stepping in to raise

the minimum wage to $15 or, hell, maybe even $20 depending on how bad inequality gets,

then you're going to have to suffer through that.

Your days of trying to screw over American workers by going and lobbying politicians

to get protections repealed, that has to come to an end because it's not just our livelihood

that's at stake.

It's yours, because what happens to a multi-billion dollar CEO when citizens can no longer afford

to utilize their company?

They go out of business.

They lose everything.

But I think CEOs in the United States seem to have forgotten that.

They are dependent on us, not the other way around.

For more infomation >> Economists Warn Of Dangers Of Surging Income Inequality - Duration: 4:15.

-------------------------------------------

Russian Plane Crashes Into Black Sea - Duration: 0:38.

RAEGAN MEDGIE WILL HAVE YOUR

FULL FORECAST COMING UP.

RIGHT NOW, A DEVELOPING

STORY.

THE CRASH OF A RUSSIAN MILITARY

PLANE WITH MORE THAN 90 PEOPLE

ON BOARD.

OFFICIALS NOW SAY SOME BODIES

HAVE BEEN RECOVERED.

AND RESCUERS ARE SEEING NO

SIGNS OF ANY SURVIVORS.

RESCUE CREWS FIRST LOCATED

FRAGMENTS OF THE PLANE THE SAME

MODEL AS AN AIRCRAFT WE'RE

ABOUT TO SHOW YOU, UNDER THE

SURFACE OF THE BLACK SEA.

IT DISAPPEARED AFTER TAKING OFF

ON A FLIGHT TO SYRIA.

84 PASSENGERS AND EIGHT CREW

For more infomation >> Russian Plane Crashes Into Black Sea - Duration: 0:38.

-------------------------------------------

After-Christmas Shopping Tips - Duration: 3:35.

BUT NOW WE HAVE A GOOD STRETCH

OF WEATHER FOR THE REST OF THE

WEEK.

STORES AND MALLS GET

CROWDED RIGHT AFTER CHRISTMAS.

SOME PEOPLE ARE LOOKING TO MAKE

RETURNS OR USE GIFT CARDS.

SOME MAY BE HUNTING FOR THOSE

POST-HOLIDAY MARKDOWNS.

HERE WITH YOUR POST-HOLIDAY

GAME PLAN IS BENJAMIN GLAZER

THE FEATURES EDITOR AT DEALS

NEWS.

THANK YOU FOR JOINING US.

THANK YOU FOR HAVING ME.

PEOPLE ARE STILL UNWRAPPING

GIFTS.

BUT FOR THOSE WHO MAYBE HAVE

SEEN SOMETHING ALREADY THAT

THEY MIGHT WANT TO RETURN, WHAT

SHOULD YOU DO WITH GIFTS THAT

YOU GET THAT YOU DON'T WANT?

Reporter: IF POSSIBLE, IT'S

BEST TO HAVE A RECEIPT.

IF YOU ARE TRYING TO MAKE A

RETURN.

OF COURSE, THIS COULD BE A

LITTLE DEALT CAT IF YOU DIDN'T

GET A RECEIPT.

BUT GO TO THE PERSON WHO GIVE

THED IT TO YOU.

SAY YOU KNOW IT'S NOTHING

PERSONAL YOU JUST WANT TO ENJOY

THEIR GENEROSITY AS MUCH AS

POSSIBLE.

WHAT DO YOU THINK ABOUT

REGIFTING?

I DON'T THINK IT'S SUCH A

DIRTY WORD.

WHAT'S WRONG WITH PASSING ALONG

A GIFT TO SOMEONE WHO WILL BE

ABLE TO TAKE FULL ADVANTAGE OF

IT.

THAT YOU DIDN'T USE MAYBE.

[ LAUGHTER ]

THAT YOU DIDN'T USE AND MAKE

SURE YOU'RE NOT GIVING IT BACK

TO THE PERSON WHO GAVE IT TO

YOU.

THAT'S IMPORTANT.

WHEN IS THE BEST TIME TO MAKE A

RETURN?

IF YOU WANT THE MOST

SPENDING POWER FOR YOUR CLERKED

YOU PROBABLY WANT TO DO IT

RIGHT AWAY.

SO YOU CAN TAKE ADVANTAGE OF

THE AFTER-CHRISTMAS SALES.

IF YOU WANT TO AVOID THE

CROWDS, WAIT TWO WEEKS.

OF COURSE YOU NEED TO MAKE SURE

THAT YOU CAN WAIT TWO WEEKS

THAT THE STORE WILL STILL

ACCEPT THE RETURN ON THAT ITEM.

TALK A LITTLE BIT ABOUT THAT

BECAUSE A LOT OF STORES DO --

THEY DO HAVE A SPECIAL POLICY

DURING THE HOLIDAYS.

THAT'S RIGHT.

MOST STORES IF THEY CHANGE THE

RETURN POLICY DURING THE

HOLIDAYS, THEY ARE GOING TO

MAKE IT MORE GENEROUS.

THEY ARE GOING TO GIVE YOU MORE

TIME.

BUT A FEW AROUND 5% WILL

ACTUALLY LIMIT THE TIME.

AND YOU HAVE TO REMEMBER THAT

EVEN WITH A NORMAL RETURN

POLICY, MAYBE 30 DAYS, THAT

GIFT MIGHT HAVE BEEN SITTING

UNDER THE TREE FOR TWO WEEKS

ALREADY.

WHAT ARE THE BEST THINGS TO

BUY IF YOU ARE LOOKING TO BUY

AFTER CHRISTMAS?

THERE'S A LOT OF SALES.

WHAT ARE THE THINGS THAT PEOPLE

SHOULD BE SHOPPING FOR?

AFTER-CHRISTMAS SALES

DOMINATED BY CLOTHING.

SO THAT SHOULD BE THE NUMBER

ONE THING FOR SAVING MONEY ON

YOUR LIST.

THIS IS AN ESPECIALLY GOOD TIME

TO GET WINTER APPAREL BECAUSE

THAT WASN'T AS -- WASN'T AT ITS

LOWEST PRICES OVER BLACK FRIDAY

WHEN A LOT OF ITEMS ARE.

NOW WE ARE HITTING THE MIDDLE

OF THE SEASON, IT WILL BE

CLEARANCE LEVEL PRICES.

SO IF YOU WANT TO START YOUR

CHRISTMAS AND HOLIDAY SHOPPING

NOW FOR NEXT YEAR, CLOTHING IS

A GOOD THING TO GET.

SURE, HATS, SWEATERS.

AND EVERYTHING LIKE THAT.

SO CLOTHING NOW.

WHAT ABOUT ELECTRONICS AND

OTHER HOME ITEMS?

WHEN IS A GOOD TIME TO BUY

THOSE?

ELECTRONICS, UM, IT'S NOT

THE BEST TIME.

YOU KNOW, IF YOU WANT THE

DISCOUNT, YOU'RE GOING TO HAVE

TO HUNT FOR THE DEAL.

YOU KNOW, DO YOUR RESEARCH.

LOOK FOR COUPON CODES.

HOME GOODS I WOULD RECOMMEND

WAITING UNTIL PRESIDENT'S DAY

SALES.

ANOTHER THING THAT IS A GOOD

BUY THIS MORNING IS FITNESS

EQUIPMENT OR DURING THE AFTER-

CHRISTMAS SALES AND THEN INTO

JANUARY BECAUSE STORES WANT TO

TAKE ADVANTAGE OF PEOPLE MAKING

FITNESS-RELATED NEW YEAR'S

RESOLUTIONS.

FITNESS EQUIPMENT WHAT IS --

EVERYTHING FROM ACTIVE WEAR

TO BARBELLS, EVEN TREADMILLS

BIG STUFF THAT IF YOU GET TEN,

20% OFF THAT IT COULD TRANSLATE

TO THOUSANDS.

ANYTHING ELSE POST-CHRISTMAS

THAT PEOPLE SHOULD KEEP IN

MIND?

DECEMBER 26th IS THE BEST

TIME TO BUY CHRISTMAS

DECORATIONS.

AGAIN, IF YOU ARE LOOKING

FORWARD TO NEXT YEAR, YOU KNOW,

THINKING AHEAD, SOME OF THOSE

BIG LAWN INFLATABLES, ALL TIME

PRICE LOWS THE WEEK AFTER

CHRISTMAS.

THAT'S NOT WHEN EVERYONE WANTS

TO BE THINKING ABOUT IT BUT

IT'S THE BEST TIME TO BUY.

BUT IN A YEAR YOU'LL BE GLAD

YOU DID RIGHT?

[ LAUGHTER ]

RIGHT.

THANK YOU SO MUCH, WE

APPRECIATE IT.

THANK YOU VERY MUCH.

For more infomation >> After-Christmas Shopping Tips - Duration: 3:35.

-------------------------------------------

SCOTT BAIO'S WIFE SAYS HIS ATTACKER IS A CRAZY LADY | TMZ TV - Duration: 1:57.

YOU THINK YOU'RE LOOKING AT A

NORMAL SUBURBAN MOM DROPPING HER

KIDS OFF AT SCHOOL.

BUT ACTUALLY YOU'RE STARING INTO

THE EYES OF MADNESS!

AT LEAST ACCORDING TO SCOTT

BAIO'S WIFE RENEE.

>> SCOTT BAIO, CHILI PEPPER WIFE

FEUD IS CONTINUING.

ANNOUNCER: YES, IT'S BAIO'S

BLOODSHED PART 2!

THIS IS REALLY STILL A THING,

HUH?

OK.

>> SCOTT BAIO CLAIMED HE WAS

ATTACKED AT A SCHOOL FUNCTION

FOR HIS KIDS BY RED HOT CHILI

PEPPER CHAD SMITH THE DRUMMER,

HIS WIFE NANCY MACK.

ANNOUNCER: YES, NANCY ALLEGEDLY

PHYSICALLY AND VERBALLY ATTACKED

SCOTT FOR BEING A TRUMP

SUPPORTER IN FRONT OF CHILDREN.

AND AFTER "TMZ" BROKE THE STORY,

SCOTT'S WIFE SAID HER FAMILY

STARTED GETTING HARASSED ONLINE.

>> I'M NOT SURE WHY ME, MY

HUSBAND OR CHILD IS GETTING

BASHED.

HARD TO STAND BACK AND DO

NOTHING.

SO SHE DID SOMETHING.

SHE DROPPED A MODERN DAY ATOMIC

BOMB -- AN UNFLATTERING SCREEN

SHOT OF THE ENEMY!

DOES THIS LOOK LIKE A SANE

MOTHER/LADY TO YOU?

BOOM!

HARVEY: WE KNOW SHE ACTUALLY

VIDEOTAPED PART OF THE

CONFRONTATION.

>> AND SHE RELEASED A SCREEN

GRAB OF IT.

>> DON'T YOU THINK THIS JUST

CREATES MORE DRAMA FOR PEOPLE

MORE TO ATTACK HER?

>> YES, OF COURSE, IT DOES.

>> THESE PARENTS HAVE TO STOP.

MOVE ON AND DO THIS PRIVATELY.

ANNOUNCER: YEAH, EVERYBODY STEP

AWAY FROM THE INTERNET, EXCEPT

FOR TMZ.COM OBVIOUSLY.

>> MOVE ON.

IT'S CHRISTMAS TIME.

THERE ARE MORE THINGS TO LIKE

WORRY ABOUT.

ANNOUNCER: YEAH, LIKE WHATEVER

HAPPENED TO WILLIE AMES?

WHAT IS HE DOING FOR CHRISTMAS?

For more infomation >> SCOTT BAIO'S WIFE SAYS HIS ATTACKER IS A CRAZY LADY | TMZ TV - Duration: 1:57.

-------------------------------------------

2015-2017 Mustang (GT) BMR Lowering Springs - Drag Review & Install - Duration: 5:39.

Hey guys, Stephanie with americanmuscle.com, here with a review and install of the BMR

Drag Lowering Springs for 2015 and newer Mustangs.

We're gonna be talking about a few different things with these springs, but mostly we'll

talk about what you can expect from these springs in both the performance and looks

categories, and we're also gonna talk about the install as well.

I'll talk more about the install later, but you're looking at a two out of three wrenches

in the difficulty meter.

The BMR Drag Lowering Springs are gonna be a good option for the S550 owners out there

who are looking for a drag spring that's gonna help transfer weight for better acceleration.

Lowering springs have a big impact on both the looks and handling of these cars, and

these springs are a linear spring that are gonna offer a pretty big drop.

These springs will drop the S550 about 1.2 inches in the front of the car and 0.5 inches

in the rear.

It may not sound like it, but this is a good amount of drop for the S550.

And even though these springs aren't as much about the looks improvements as they are about

performance, you're still gonna be gaining in the looks area.

Depending on your wheel and tire setup, this drop is going to eliminate a lot of the wheel

gap that the car has from the factory, and it's gonna leave the car sitting a little

bit above the tires.

But of course, that can change depending on what size wheels you're running.

Keeping on track with the subject of the drop that these springs offer, keep in mind that

a one inch drop, or just under a one inch drop is pretty standard across the board for

this year range.

So the 1.2-inch and 0.5-inch drop is gonna make for a change in the car's appearance

as well as give you those performance changes.

And you're also lowering the car's center of gravity, so you're gonna see some handling

benefits as well.

But the main purpose of these springs is for straight line acceleration, so these focus

on weight transfer to help with traction.

Now, none of this means that these springs won't work on a daily-driven car.

They'll work just fine.

These springs are also still gonna work with both the factory wheels and the preconfigured

wheel and tire kits that are on the site.

When it comes to shopping for a set of springs, it really all comes down to your personal

preference and what you want out of the springs.

These springs were specifically designed to be a drag spring, so you have to keep that

in mind if you've got a street car and you're worried about ride quality.

Now with that being said, I wanna mention that these are linear springs.

These are not the progressive rate springs that we tend to see that are gonna change

as you drive.

Linear springs have a constant rate of force per inch, so they have one defined spring

rate and that's it.

So basically as the load on the spring increases, the spring compresses an amount directly proportional

to that load, and this makes a linear spring more performance-oriented than a progressive

rate spring.

Progressive rate springs, or variable rate springs, have low initial spring rates that

increase as the spring is compressed, which makes for a softer and smoother ride quality.

I do wanna say that a lot of times when you're shopping for lowering springs, you're also

shopping for things like adjustable caster camber plates and a new set of both shocks

and struts.

In this case, I wouldn't say that caster camber plates are necessarily required, but I will

say that a one and a half inch drop is about the limit of where you'd need a set of adjustable

caster camber plates in order to get your alignment within spec.

It's gonna be close, so a set of caster camber plates wouldn't be a bad idea at all.

At the end of the day, it never hurts to have caster camber plates, so if you've got the

extra cash, I'd say go ahead.

But in all reality, you will be able to get away without picking up a set.

As far as the shocks and struts, this goes back to the drop and the performance that

you want out of the car.

I'd say that you can get away with the factory shocks and struts in this case, due to the

fact that you probably don't have any miles on your components at this time.

But if you're really looking for drag strip performance, it's always a good idea to pick

up a set of adjustable rear shocks to help with that weight transfer and your traction.

When it comes to price, it all depends on how you buy these springs.

BMR offers a full set for between $200 and $300, or you can purchase just the front or

just the rear springs.

The front springs will cost just over $100, and the rears will cost right about $150.

So you do have some options there.

Now, as far as the price for the set of springs goes, these springs are gonna be one of the

middle-of-the-road options.

They're not the most expensive, but they're not the least expensive either.

But if you're just looking to get your car lower and you aren't concerned with ride quality,

there are some other options on the site that cost a little less and will get you where

you need to be.

So the install here is gonna take about four hours.

I'm gonna call it a two out of three wrenches on the scale.

You will need some knowledge to complete this install, so I'd recommend having a knowledgeable

helping hand or taking to this to a shop for the install, especially since it's always

a good idea to get an alignment after the install anyway.

This install can be done on jack stands if you don't have access to a lift, but as usual,

a lift would be your best bet here.

Gonna need a few tools, including a spring compressor, so make sure you have that before

you start the install.

You're gonna need to get down to the spring and strut assembly, so everything like the

wheels, the brakes, the ABS lines will need to be moved out of the way so you can pull

the assemblies outta the car.

The spring compressor will help you remove the spring from the strut and install the

new front springs, which are compressed and installed the same way.

The strut assemblies go back the same way they came out, and the install's the same

for both sides.

The rear's where things are little bit different, but it's nothing crazy.

Essentially, the IRS upframe [SP] will be dropped, along with the rear shock mount,

so you can slide the rear springs out.

Just like the front, the rear springs install the same way that they were uninstalled.

There's no surprises there.

And after the new springs are in, you can begin reinstalling the shocks and everything

else that you want installed, and that's about all it's gonna take.

Like I mentioned earlier, a fresh alignment after the install isn't a bad idea.

Wrapping things up here, the BMR Drag Lowering Springs are a linear spring with an aggressive

drop and improvements in handling to make for a car that feels track-ready.

They'll drop the car 1.2 inches in the front and 0.5 inches in the rear, and they're designed

to give better weight transfer for better traction.

The springs are not difficult to install, they're at the middle of the pack as far as

pricing goes, and you can check them out more online right here at americanmuscle.com.

For more infomation >> 2015-2017 Mustang (GT) BMR Lowering Springs - Drag Review & Install - Duration: 5:39.

-------------------------------------------

Iron Man vs Captain America / Creating Vision | Avengers Age of Ultron (2015) | 4K ULTRA HD - Duration: 3:48.

I can work on tissue degeneration

if you could fry whatever operational system Cho implanted.

Yeah, about that.

No.

- You have to trust me. - Kind of don't.

Our ally, the guy protecting the military's nuclear codes,

I found him.

Hello, Dr. Banner.

Ultron didn't go after Jarvis because he was angry.

He attacked him because he was scared of what he can do.

So Jarvis went underground.

Scattered, dumped his memory.

But not his protocols.

He didn't even know he was in there until I pieced him together.

So, you want me to help you put Jarvis into this thing?

No! Of course not.

I wanna help you put Jarvis in this thing.

We're out of my field, here.

You know bio-organics better than anyone.

And you just assume that Jarvis's operational matrix

can beat Ultron's?

Jarvis has been beating him from inside without knowing it.

This is the opportunity.

We can create Ultron's perfect self

without the homicidal glitches he thinks are his winning personality.

We have to. - I believe it's worth a go.

I'm in a loop!

I'm caught in a time loop. This is exactly where it all went wrong.

I know. I know. I know what everyone's gonna say.

But they're already saying it.

We're mad scientists.

We're monsters, buddy. We've gotta own it.

Make a stand.

It's not a loop.

It's the end of the line.

This framework is not compatible.

The genetic coding tower is at 97%.

You have got to upload that schematic in the next three minutes.

I'm gonna say this once. - How about "none-ce"?

- Shut it down! - Nope, not gonna happen.

You don't know what you're doing.

And you do?

She's not in your head?

I know you're angry.

Oh, we're way past that.

I could choke the life out of you and never change a shade.

Banner, after everything that's happened...

It's nothing compared to what's coming!

- You don't know what's in there. - This isn't a game!

No, no. Go on.

You were saying?

- Pietro!

What?

You didn't see that coming?

I'm rerouting the upload.

Go ahead, piss me off.

Wait!

For more infomation >> Iron Man vs Captain America / Creating Vision | Avengers Age of Ultron (2015) | 4K ULTRA HD - Duration: 3:48.

-------------------------------------------

Did Denzel Washington Just Shame Our Photog? | TMZ TV - Duration: 1:18.

>> MR. WASHINGTON, I'M EXCITED

FOR THIS MOVIE, SIR.

I GOT DENZEL WASHINGTON IN NEW

YORK CITY.

HE'S IN THE MOVIE "FENCES," HE'S

AN ACTOR AND DIRECTOR IN IT.

THIS IS THE BEST MOVIE YOU'VE

DONE SO FAR.

I'M EXCITED FOR DIRECTOR.

>> SO DENZEL IS DENZEL IN THIS

CLIP.

HE'S EXACTLY HOW YOU WANT DENZEL

WASHINGTON TO BE.

>> LISTEN, I STUDIED ACTING,

WHAT'S THE KEY TO CRYING ON

SCENE?

>> BECAUSE OF ALL OF THE ACTORS

HAD ONE OF THE BEST CRY SCENES

EVER IN A MOVIE.

>> GO TO COLLEGE.

>> GO TO COLLEGE?

I DID.

>> WHAT DID YOU GRADUATE FROM?

>> CANE UNIVERSITY IN JERSEY.

>> WHAT DID YOU STUDY?

>> COMMUNICATIONS.

HARVEY: WAIT A MINUTE, WAS HE

COLLEGE SHAMING YOU?

>> I DON'T KNOW IF HE'S SHAMING

ME BUT IT'S 10 DEGREES IN NEW

YORK CITY AND I'M HOLDING A

CAMERA

TRYING TO ASK A GUY HOW TO CRY

IN A MOVIE, SO I DON'T KNOW --

THINGS AREN'T GOING THAT GREAT.

[LAUGHTER]

>> THAT MAKES ME CRY!

For more infomation >> Did Denzel Washington Just Shame Our Photog? | TMZ TV - Duration: 1:18.

-------------------------------------------

2015-2017 Mustang RTR Tactical Performance Adjustable Sway Bar Kit - Front and Rear Review & Install - Duration: 5:29.

Hey, guys, Stephanie with americanmuscle.com here with the RTR Anti-Roll Adjustable Sway

Bar Kit, for 2015 and up S550 Mustangs.

In this video, we're gonna be discussing a few different things with this sway bar kit,

but mostly we're gonna be talking about the materials and construction of the sway bars,

and the install.

I'll get more into the install later, but I'll tell you right now that this is an easy

install, and I'm gonna call it a one out of three wrenches on the difficulty meter.

The RTR Anti-Roll Adjustable Sway Bar Kit is gonna be a good option for someone that's

looking to improve their handling for their S550, plain and simple, with an adjustable

tubular sway bar that's gonna give them handling options.

Sway bars have a big impact on the handling of the S550, or any Mustang for that matter,

so they tend to be one of the most cost-effective handling upgrades.

They provide a lot of benefits, such as less body roll for better all-around handling,

which is great news for the S550 chassis, and they aren't as expensive as other suspension

mods.

Sway bar kits, like this one here, have a positive impact on handling performance with

one single purchase.

The way sway bars work isn't complicated.

For normal driving and cornering, the suspension is gonna compress and decompress.

A sway bar counteracts as compression and decompression.

The weight transfer during cornering creates a twisting force on the sway bar so that the

sway bar creates a lifting force on the outside control arm in order to create a flatter handling

experience.

By flatter handling experience, I mean things like correcting understeer and oversteer.

There are a few things that affect how much of an impact the sway bar has.

The thickness of the bar and its composition are gonna play a big role, and these bars

from RTR are tubular bars, which means that they're gonna be strong but they're also lightweight,

especially when you compare them to a solid bar.

And both these bars are upgrades over the factory bars when we look at thickness.

The front bar is 35 millimeter and the rear bar is 25 millimeter.

They are also powder-coated so they are gonna have corrosion resistance, as well.

Another factor that's gonna affect how well a sway bar works is the geometry of the bar.

By the geometry of the bar I mean that the sway bar has bends and different angles to

it, but the key is gonna be the length of the lever arm, which is right here.

Both of these bars are three-way adjustable.

So you can see that you have three options here for your install.

Having these bars be three-way adjustable means that you're gonna have a longer lever

arm.

When you look at the length of the lever arm, the shorter the arm is, the greater torque

and the more force that the bar is going to have.

This is what you're adjusting when you're moving around between the points on an adjustable

sway bar, the amount of force and torque that will be applied to that outside control arm

in order to decompress the outside suspension.

Now, you have three different options here when you go to install these bars, and depending

on what kind of performance you're looking for from these bars.

So just know that if you're hanging out here at the very end of the lever arm, you're creating

a softer setup, one that's closer to stock.

The bushing is also gonna affect the sway bar.

These bars come with polyurethane bushings, which is gonna be a good option for street

cars.

Poly bushings are more rigid than the factory soft rubber bushings are, but they aren't

too rigid to stop all movement.

The more rigid the bushings are, the more rigid the bars will be because they'll not

be allowed to move as much.

These bushings are also easy to maintain, which means that you can keep greasing them

over time, which will keep down on the noise and keep up the life of the bushing.

The last think I wanted to talk about when it comes to sway bar effectiveness is that

suspension travel is going to affect the sway bar.

When I say suspension travel, I'm mostly referring to spring rates.

The sway bars and the springs are gonna work very closely together, and while sway bars

are a very effective upgrade on their own, these sway bars work best with a set of RTR

springs.

The springs and these sway bars were designed to work hand-in-hand to give you three totally

different handling experiences.

As far as price, you're looking at spending between $500 and $600 for this kit, which

is relatively close to the other options on this site, but it is a little bit more expensive.

But if you're looking to complete an RTR handling package, or you're brand loyal, then this

kit is what you're looking for.

The other options on the site do have different materials, or different adjustability, or

different thicknesses, so just make sure you're shopping in the range of materials, thickness,

and adjustability that you need for your setup and how you want your car to perform.

The install for these sway bars is not difficult at all.

You're looking at spending about two hours to get it all done, and it's a one out of

three wrenches on the difficulty meter.

Get a handful of different tools but nothing crazy, and as usual, a lift would really help

here but the job can be done on jack stands if you don't have access to one.

Your old sway bars are gonna need to be removed.

I'd recommend greasing any new bushings as well, prior to the install, since waiting

until after everything is installed will make that process a little bit more difficult.

Grease the bushings as much as possible, since poly bushings can be a little noisy after

a short period of time.

Getting the factory sway bars out is really only a few bolts.

You might need to pop out your air box to get to some of the bolts for the front sway

bar, but the majority of the bolts can be removed from reaching down through the engine

bay, except for the [inaudible 00:04:40] bolts, of course.

And you just have to maneuver the old bar out, which can be a little bit tricky but

it just takes a little time.

The rear is a little bit easier to get to.

You can get to all the bolts from below the car, so remove the end links, and the bolts

and the brackets that hold the bar to the subframe, and sneak the bar out from below

the car.

The new bars install the same way that the old bars came out, so there's no surprises

there.

You just need to figure out what your adjustment points are gonna be and how you want the car

set up.

Wrapping things up here, the RTR Sway Bar Kit includes a front and rear three-way adjustable

bar that's tubular in design, and thicker in diameter than the factory bars, for more

rigidity.

This kit's made to help with cornering and handling by keeping the suspension flat and

even.

You can check it out more online here at americanmuscle.com.

For more infomation >> 2015-2017 Mustang RTR Tactical Performance Adjustable Sway Bar Kit - Front and Rear Review & Install - Duration: 5:29.

-------------------------------------------

A Christmassy Week in Korea 🎄국제커플의 크리스마스 파티 & 보정동 카페거리 & 비모 채널 (자막 CC) - Duration: 15:21.

For more infomation >> A Christmassy Week in Korea 🎄국제커플의 크리스마스 파티 & 보정동 카페거리 & 비모 채널 (자막 CC) - Duration: 15:21.

-------------------------------------------

2015-2016 F-150 Putco Chrome Mirror Covers - Skull Cap Replacement Review & Install - Duration: 3:53.

Hey everybody, I'm Justin with americanmuscle.com.

Here with my quick review of the Putco Chrome's Skull Cap Replacements, fitting all 2015 and

up F-150s, excluding those equipped with the tow mirrors.

In this video, I'm gonna cover a few things about the Putco Skull Cap Replacements.

Basically, what you can expect when it comes to construction, how they're gonna affect

your styling, where they're gonna land on the overall price scale, and basically what

it takes to get them installed.

Now, unlike a lot of other Putco accessories for your truck, these are not a stick on part,

these are a complete replacement.

So therefore, the install will be slightly more involved, but still not bad overall,

willing to give it one out of three wrenches on the overall scale of difficulty, and we

will talk a little bit more about the install later on.

So, the Putco Mirror Caps or Skull Caps as are often times called, are gonna be for the

F-150 owners out there who might have missed out on the chrome options from the factory,

and really enjoy the look of a Chrome Mirror Cap or Skull Cap, or on the other hand, it

might be for those owners who might have got the chrome options from the factory, but might

be looking or replace a damaged or dingy mirror cap.

And therefore, looking for a very affordable replacement.

Now, let's quickly get into the actual Mirror Caps here from Putco.

Anybody that knows the name Putco is probably familiar with them, they know they've been

making a wide variety of truck accessories for a long time now, with a concentration

on chrome and these products are really going to embody that.

The chrome plating process really is one of Putco specialties and as such, the finished

product here with the Mirror Caps really is beautiful, free of any imperfections or any

blemishes.

Now, they actually are going to match up very nicely with any existing factory chrome you

might have on your truck already, or even some aftermarket parts as well.

As far as visual impact or overall impact to your styling, I will say that when installed,

the Putco Mirror Caps or Skull Caps are really gonna make a big visual statement and give

off more of a higher end look.

And that's really no surprise because Ford actually outfits a lot of their higher end

F-150s with the Chrome Mirror Caps from the factory, whether be it the chrome package

equipped lariats, the King Ranch or even the Platinum.

Now one thing I can really commend Putco on here at least with this product is that, they

take their time when it comes to measuring, designing and producing these things because

when installed, they really do fit like a factory part, and they actually resemble a

factory part as well.

And it's something I noticed when we actually installed them on our shop truck here at AM.

And again, if you have a chrome package equipped newer F-150, and maybe you damaged one of

your factory Chrome Skull Caps, these will not only fit like the factory part but they're

also gonna cost a significantly less in the process.

Now, these factory OE Chrome Skull Caps from Ford will cost you over 100 bucks brand new.

The Putco options here on the other hand are only gonna cost you roughly 50 bucks to 60

bucks, so you're saving some money and you're getting a very comparable product.

Switching gears to the install.

Now, there is a little bit of work to get these new Chrome Skull Caps installed from

Putco.

However, it all can be done with some pretty basic hand tools including a T15 Torx tool,

along with a flat head screwdriver.

Putco does include some very detailed instructions to help you along the way, and they do instruct

you to slightly disassemble the mirror area in order to install your new caps.

This involves removing the actual mirror glass using that flathead screwdriver, separating

the back half from the front half of the actual mirror housing, and then replacing the Skull

Caps while the housing has been removed from the truck.

Overall again guys, nothing too crazy or out of the ordinary here.

No wiring, or anything like that.

So, I'm still gonna give it one out of three wrenches on my difficulty scale.

Again, Putco throws in some very detailed instructions that will help you along the

way, and should help you get everything banged down about an hour or less from start to finish.

Chrome Skull Caps are one of those modes that seems to appeal to a lot of truck owners out

there for a few different reasons.

The Putco options I have here are gonna offer a great build and a factory like fit, but

without the factory inflated price tag.

Be sure to check out a few options for your truck from Putco, right here at americanmuscle.com.

For more infomation >> 2015-2016 F-150 Putco Chrome Mirror Covers - Skull Cap Replacement Review & Install - Duration: 3:53.

-------------------------------------------

Yoo Santa going to IU 's home - Duration: 0:27.

IU

Merry Christmas

In 2016

You did not cry and tell lies

So Santa has prepared a gift for you

Let's go to IU's home

For more infomation >> Yoo Santa going to IU 's home - Duration: 0:27.

-------------------------------------------

Red Wine Doughnuts | RECIPE - Duration: 2:16.

For more infomation >> Red Wine Doughnuts | RECIPE - Duration: 2:16.

-------------------------------------------

Merry Christmas from Rat & Cat - Duration: 8:39.

Hey there budy boy.

See you later Luke.

This lock keeps getting frozen shut.

I need to take it inside and

thaw it out. I have to thaw it out by warming it up with my hand.

I had some chores to get done and turns

out this next snow storm that's coming

is bigger than I thought it was going to

be. There is a severe weather alert: about

six to eight inches which, where I grew up,

wasn't too bad, but around here it's like

they don't take as good care of roads,

and also we have some really steep roads

around her too, so. I'm out of baby

formula and hay for the goats and I need

to go get some more so I'm headed out

this snowstorm, the start of it, to try to

get those supplies before we get dumped on.

So, I'm off. Right Rocket?

Alright made it back home here and...

Tight corner. Got the hay. Got the baby

formula. Got a Christmas present for my

son and some sleds cause some of our old

sleds were broken and hot chocolate

marshmallows to weather the storm.

I think we're all set

although i don't think it's gonna be

that the storm really, but it's always

fun that think it is and... actually it's

just playing smart and prepare, be

prepared, because you never know.

Nice to be back.

For more infomation >> Merry Christmas from Rat & Cat - Duration: 8:39.

-------------------------------------------

In the Kitchen: Chestnut soup - Duration: 3:14.

HE HEALTHY LIVING

PLEARNING CENTER IN SOUTH

PBURLINGTON.

PVANESSA: HI, EVERYONE.

PI'M VANESSA MISCIAGNA, HERE WITH

PCLARINA CRAVINS OF THE HEALTHY

PLIVING LEARNING CENTER.

PTODAY, WE ARE WORKING WITH AN

PINGREDIENT THAT SEEMS TO POP UP

PAROUND THIS TIME A BEER.

PCLARINA: I THOUGHT IT WOULD BE

PFUN TO MAKE A CHESTNUT SOUP.

PIT IS SIMPLE AND HEARTY AND

PCREAMY.

P

PWE'RE GOING TO START WITH A

PTYPICAL MIREPOIX

PWHICH IS USUALLY ACCELERATE,

PCARROTS, AND ONION.%

BUT INSTEAD OF ONION, WE WILL

PUSE SHALLOTS.

SO CUT THESE INTO NICE, SMALL

PPIECES.

PVANESSA: I THINK THE ONLY WAY

PPEOPLE TYPICALLY THINK OF HAVING

PCHESTNUTS ARE ROASTED ON AN OPEN

PFIRE.

PCLARIN AND IN STUFFING.

PI THINK A LOT OF PEOPLE USE

PCHESTNUT IN STUFFING.

PTHAT IS A COMMON THING TO SEE.

PPUT THE CARROT IN.

PONE STALK OF CELERY.

PI WILL QUICKLY CHOP THESE GUYS

PUP.

PIT DOES NOT NEED TO BE PERFECT

PBECAUSE THEY WILL ALL GET PUREED

PIN THE END.

PI HAVE MY MIREPOIX IN THERE.

PA NICE POUR OF OLIVE OIL.

PFIRE THIS UP.

PGRAB A WOODEN SPOON AND START TO

PSOFTEN THESE UP.

PWHILE THOSE SOFTEN, WE CAN TAKE

POUR THYME -- LET'S PULL OFF

PTHESE LEAVES.

PVANESSA: THYME IS ONE OF MY

PFAVORITE HERBS.

PCLARINA: I LIKE IT BECAUSE IT

PHAS FLAVOR BUT IS NOT

POVERPOWERING

PSO THESE ARE STARTING TO SOFTEN

PUP.

PWE WILL PUT IN THE THYME.

PGROUND IN SOME BLACK PEPPER.

PVANESSA: DO WE HAVE THE SALT

PYET?

PCLARIN WE WILL ALWAYS SALT.

PPUT IN ALL OF THESE CHESTNUTS.

PTHESE ARE JUST WHOLE ROASTED.

PVANESSA: IS THAT READILY

PAVAILABLE?

PCLARINA: IT IS A PRETTY COMMON

PINGREDIENT.

PDEFINITELY SOMETHING PEOPLE LO

PFOR AROUND THE HOLIDAYS.

PNOW, W POUR IN ONE FOURTH A CUP

POF WHITE WINE.

PAND ONE FOURTH CUP OF MAPLE

PSYRUP.

PVANESSA: WIN AND MAPLE SYRUP

PARE SOME OF MY FAVORITE THINGS.

PCLARINA: THIS IS VEGGIE STOCK.

PVANESSA: KEEPING IT VEGAN.

PCLARINA: IF YOU DO NOT NEED IT

PTO BE VEGAN IT IS TOTALLY FINE

P, TO USE LEFTOVER TURKEY STOCK.

PWE WILL LET THIS HANG OUT.

PONCE IT BEGINS TO SIMMER, WE CAN

PPUREE IT

POUR SOUP HAS STARTED TO SIMMER.

PTURN IT OFF AT THIS POINT.

PAS YOU GUYS CAN SEE, THIS IS A

PHUGE IMMERSION BLENDER.

PTHIS IS WHAT WE USE

PINDUSTRIALLY

PVANESSA: THAT IS QUITE LARGE.

PCLARINA: YOURS WILL PROBABLY NOT

PLOOK THE SAME, BUT IT WILL WORK

PJUST AS WELL.

PPOP THIS IN.

PTURN IT ON.

PVANESSA: LIKE A WHIRLPOOL.

PCLARINA: ALL RIGHT.

PVANESSA: IF YOU DO NOT HAVE ONE

POF THESE?

PCLARINA: PUT IT IN A BLENDER.

PYOU CAN PUT IT IN A CUISINART.

PYOU WANT TO PUREE IT, SO IF YOU

PSEE CHUNKS, KEEP GOING.

PAND THIS IS FILLING SOUP, SO YOU

PDO NOT NEED A LOT OF I

PBECAUSE CHESTNUTS ARE SO HEARTY.

PYOU CAN TOP THIS WITH WHATEVER

PYOU WANT, OR YOU DO NOT EVEN

PNEED A TOPPING.

PSO WHAT I WILL DO IS I WILL DO A

PBIT OF SUMAC.

PVANESSA: WHAT IS IT?

PCLARINA: IT IS A BERRY THAT

PGROWS ON TREES.

PIT ACTUALLY GROWS IN VERMONT.

PVANESSA: A LITTLE PARSLEY?

PCLARINA: YES.

PYOU CAN PUT IN ALMOST ANYTHING

PTHAT WILL NOT OVERPOWER YOUR

PDISH.

PVANESSA: WE HAVE OUR HOLIDAY

PCOLORS GOING ON HERE.

PLET'S DIG IN.

PTHAT'S REALLY GOOD.

PIT TREADS THE LINE BETWEEN

PHEARTY AND LIGHT.

PCLARINA: I TOTALLY AGREE

PTHAT IS SUCH A GOOD STATEMENT.

PIT IS REFRESHING.

PBUT IT WILL FILL YOU UP.

PVANESSA: ANYTHING YOU WANT FROM

PA WINTER SOUP.

PIF YOU'RE LOOKING FOR A WAY T

PSTART YOUR NEXT HOLIDAY MEAL OR

PIT IS JUST A COLD DAY AND YOU

PWANT SOME SOUP I WOULD

P, DEFINITELY GIVE THIS RECIPE

PTRY.

For more infomation >> In the Kitchen: Chestnut soup - Duration: 3:14.

-------------------------------------------

BEST OF FUNNY FOOTBALL MOMENTS ● FOOTBALL FAILS ● SHOTS ● BLOOPERS ● 2017 [HD] - Duration: 12:39.

Goal

For more infomation >> BEST OF FUNNY FOOTBALL MOMENTS ● FOOTBALL FAILS ● SHOTS ● BLOOPERS ● 2017 [HD] - Duration: 12:39.

-------------------------------------------

2005-2014 Mustang (GT) BMR Lowering Springs - Performance Review & Install - Duration: 6:10.

Hey, guys.

Stephanie with americanmuscle.com, here with a review and install of these BMR Lowering

Springs for 2005 to 2014 GT Mustangs.

We're gonna be talking about a few different things with these springs, but mostly we'll

talk about what you can expect from these springs in both the performance and looks

categories, and we're also gonna talk about the install as well.

I'll talk more about the install later, but you're looking at a two out of three wrenches

on the difficulty meter.

The BMR Performance Lowering Springs are gonna be a good option for the GT owners out there

who are looking for a spring that'll perform for both the daily driver and the drag car.

These are a crossover spring that are made to function in both worlds.

So they're soft enough for the track, but they give enough support to keep the body

of the car flat and level through corners.

Lowering springs have a big impact on both the looks and handling of the S197 chassis

and these springs are a linear spring that are gonna offer a pretty big drop to these

cars.

These springs will drop the GT about one and a half inches all the way around the car,

and like I said, it doesn't get much lower than this for the S197 from a lowering spring.

And it may not sound like it, but this is a pretty big drop.

Depending on your wheel and tire setup, this drop is gonna eliminate a lot of the wheel

gap that the car has from the factory that's gonna leave the car sitting nice and even

a little bit above the tires.

But of course, that can change, depending on what size wheels you're running.

So a one-inch drop or just under a one-inch drop is pretty standard across the board for

this year range.

This car sits pretty high from the factory, so the one and a half inch drop is pretty

aggressive.

I mean aggressive in both looks and performance changes.

This drop will lower the car's center of gravity enough to create more track-like handling

capabilities.

These springs are really gonna reduce squat during acceleration and reduce wheel hop as

well.

You're also looking at much less body roll during cornering and less nose dive during

braking.

Now, these springs do offer a good amount of drop, but it doesn't mean that they're

not gonna work for a daily-driven car.

They'll work just fine.

It really all comes down to your personal preference and what you want out of these

springs.

These springs were specifically designed to be that crossover spring between both drag

racing and daily driving, so you don't have to worry too much about a rough ride quality.

Now, with that being said, I wanna mention that these are linear springs.

These are not progressive rate springs that we tend to see that are gonna change as you

drive.

Linear springs have a constant rate of force per inch, so they have one defined spring

rate and that's it.

And these springs have a 220-pound spring rate, so basically as the load on the springs

increase, the spring compresses an amount directly proportional to that load.

And this makes a linear spring more performance-oriented than a progressive rate spring.

Progressive rate springs, or variable rate springs, have a low initial spring rate that'll

increase as the spring is compressed, which makes for a softer and smoother ride quality.

But keeping the drop that these particular springs offer in mind, they're still gonna

work with both the factory wheels and tires and the pre-configured wheel and tire kits

that are on the site.

These springs aren't gonna make the car difficult to drive places, but you will need to be a

little bit more careful.

They are gonna be stiffer than the factory springs as well, so you will notice some more

road noise.

But I wouldn't say that these give a bad ride quality at all.

It's just not as soft as factory.

I do wanna say that a lot of times, when you're shopping for lowering springs, you're also

shopping for things like adjustable caster camber plates and a new set of both shocks

and struts.

In this case, I wouldn't say that caster camber plates are necessarily required, but I will

say that a one and a half inch drop is about the limit of where you'd need a set of adjustable

CC plates in order to get the alignment within spec.

It's gonna be close, so a set of CC plates wouldn't be a bad idea at all.

At the end of the day, it never hurts to have caster camber plates, so if you've got the

extra cash, I'd say go ahead.

But in all reality, you will be able to get away without picking up a set.

As far as shocks and struts go, this goes back to both the drop and the fact that these

are linear springs.

I will say that, in this case, if you have some components with relatively low mileage,

you're probably gonna be okay.

If your shocks and struts have a ton of miles on them, then I would replace them, but in

this case, since we're talking about relatively new cars here, you can probably get away with

it as long as you don't have a ton of miles.

When it comes to price, it all depends on how you buy these springs.

BMR offers a full set for just about $200, or you can purchase just the front or just

the rear springs for $100 each.

So you do have some options here.

Now, as far as the price for the set of springs goes, these springs are gonna be one of the

middle-of-the-road options.

They're not the most expensive, but they're not the least expensive, either.

If you're just looking to get your car lower and you aren't concerned with ride quality,

there are some other options on the site that'll cost a little less and will get you where

you need to be.

So the install here is gonna take about four hours, and I'm gonna call it a two out of

three wrenches on the scale.

You'll need some knowledge to complete the install, so I'd recommend having a knowledgeable

helping hand or taking to this to a shop for the install, especially since it's always

a good idea to get an alignment after the install anyway.

The install can be done on jack stands if you don't have access to a lift, but as usual,

a lift would be your best bet.

You're gonna need a few tools, including a spring compressor, so make sure you have that

before you start the install.

You're gonna need to get down to the spring and strut assembly, so everything like the

wheels, brakes, and ABS lines will need to be moved out of the way so you can pull the

assemblies out of the car.

The spring compressor will help you remove the spring from the strut and install the

new front springs, which are compressed and installed the same way.

The strut assemblies go back the same way they came out, and the install's the same

for both sides.

The rear is nearly the same.

You need to disassemble some items to get to the springs, but ultimately, you'll be

able to lower the rear axle to the point there the springs will be free.

Just like the front, the rear springs install the same way they were uninstalled.

Rubber insulators are transferred over, and new bump stops can be installed.

And after the new springs are in, you can begin reinstalling the shocks and everything

else you want installed, and that's about all it's gonna take.

And like I mentioned earlier, a fresh alignment after the install isn't a bad idea.

Wrapping things up here, the BMR Performance Lowering Springs are a linear spring with

an aggressive drop and improvements in handling to make for a car that feels track-ready.

They'll drop the car one and a half inches all the way around and will leave the car

sitting just above the wheels and tires.

These springs are not difficult to install, they're in the middle of the pack as far as

pricing goes, and you can check them out more online right here at americanmuscle.com.

For more infomation >> 2005-2014 Mustang (GT) BMR Lowering Springs - Performance Review & Install - Duration: 6:10.

-------------------------------------------

2010-2014 F-150 Brushed Interior Dim Switch Plate (Raptor) Review & Install - Duration: 2:33.

Hey, I'm Alex from americanmuscle.com, and this is my quick overview of the interior

dim switch plate in brushed stainless steel fitting your 2010 through 2014 F-150.

So in this video, we're going to go over who this might appeal to, what you should expect

to be spending, the construction and materials, and then, last but not least, we'll take a

quick look at the installation, where you're going to be looking at an incredibly easy

one-out-of-three wrenches on the difficulty meter and less than 15 minutes to get this

onto your truck.

So these should appeal to the 2010 through 2014 F-150 owner that's looking to incorporate

a little bit more of a platinum-level trim option into their truck, as brushed and stainless

steel have become the norm with some of the newer trucks this day and age.

So despite this part size, I think this is a very subtle, yet sleek-looking modification

that's going to install in a matter of minutes that's not really going to cost you all that

much.

So let's take a closer look at the construction here.

In terms of the materials here, we're going to see that this is going to be manufactured

from 100% stainless steel, which is then going to be finished off in a nice, brushed finish.

Now, if that's not going to be the look that you're aiming for, we've got a bunch of other

options on the website that you can take a look at.

One thing I definitely like about this is that, because it's going to be made out of

100% stainless, you're not going to have to worry about this pitting or rusting over time,

but it's always a good idea to give it a wipe down every now and then.

So taking a look at the pricing here, you should expect to be spending only about $30

for this kit which, in my opinion, is a huge bargain as this is, again, 100% stainless

steel, and it's going to give your truck a much needed subtle makeover in the looks department

as most, if not all, newer trucks are going to be coming with a ton of polished and/or

brushed bits in the interior.

So looking into the installation here, just like I had said in the beginning of the video,

you're going to be looking at an incredibly easy one-out-of-three wrenches on the difficulty

meter, and about less than 15 minutes to get these onto your truck.

Now, like most, if not all, of the interior accessories available for your F-150, these

are going to install with 3M double-sided tape.

One thing I would mention is that before you throw these on, it's a great idea to make

sure that the surface where you're applying these to is going to be free of any type of

grease, debris, anything that's going to be coming off on your hands as, if it's going

to be on there, it's going to prevent this from adhering correctly.

All right, so just to wrap things up here, some final thoughts.

If you're the F-150 owner that's looking to incorporate a little bit more of a platinum

trim level feel into your F-150, I would definitely suggest checking out these for your truck.

So that's my quick review and breakdown for the interior dim switch in brushed stainless

fitting your 2010 through 2014 F-150, available right here at americanmuscle.com.

For more infomation >> 2010-2014 F-150 Brushed Interior Dim Switch Plate (Raptor) Review & Install - Duration: 2:33.

-------------------------------------------

History Brief: The Red Scare (Part 2) - Duration: 3:07.

Organizations like the House Un-American Activities Committee and the Loyalty Review Boards were

not the only reasons that fear of communism spread throughout the nation in the Post WWII

era.

So, what other factors helped to spread the fear among the American public?

Nearly all of the popular forms of media (television, radio, movies, and print) featured anti-communist

propaganda in some way.

Most of this content was geared towards younger audiences in an effort to raise a generation

that would both despise communism and be terrified by it.

Many early television programs of the 1950s had an anti-communist theme as a regular part

of their programming.

Shows such as The Man Called X and I Led Three Lives featured characters who were spying

communists attempting to undermine the government, or the American way of life.

Radio programs like I was Communist for the FBI featured similar themes.

The movie industry was not to be outdone.

Throughout the 1950s, there were many films made with anti-communist messages.

The most well-known include; I Married a Communist and The Red Menace.

Science fiction films were a popular outlet for this fear as well.

Many science fiction films featured plots involving "un-American" and inhuman aliens

attempting to infiltrate American society and change the way of life.

Comic books were a popular pastime for America's youth in the 1950s and '60s.

Therefore, the comics were also filled with stories about spies and Communist villains.

Publications such as paperback novels also commonly presented Communists in the role

of villain.

The Cold War anti-communist hysteria even drifted into professional sports.

The Major League Baseball team known as the Cincinnati Reds temporarily changed their

mascot to the "Redlegs" in an effort to avoid a connection with communism (the term

"Reds" was often used as a synonym for communists).

These are just a few of the ways in which American culture was affected

by anti-communist hysteria during the Cold War era.

For more infomation >> History Brief: The Red Scare (Part 2) - Duration: 3:07.

-------------------------------------------

Business Strategy Speaker

For more infomation >> Business Strategy Speaker

-------------------------------------------

Wheels On The Bus Rhyme

For more infomation >> Wheels On The Bus Rhyme

-------------------------------------------

Dodge Charger Generations 1968 - 2015 || Appearance , Exhaust sound , Burnout etc. || Muscle car - Duration: 4:48.

For more infomation >> Dodge Charger Generations 1968 - 2015 || Appearance , Exhaust sound , Burnout etc. || Muscle car - Duration: 4:48.

-------------------------------------------

ATTY LARRY GADON BUMWELTA! Kasinungalingan ang Pagiging Bayani Ni NoyNoy! New NEws - Duration: 23:07.

duterte

For more infomation >> ATTY LARRY GADON BUMWELTA! Kasinungalingan ang Pagiging Bayani Ni NoyNoy! New NEws - Duration: 23:07.

-------------------------------------------

Hallmark Romantic Christmas Movies 2016 - Hallmark Walk of Fame 2016 - Duration: 1:22:50.

Hallmark Romantic Christmas Movies 2016 - Hallmark Walk of Fame 2016

For more infomation >> Hallmark Romantic Christmas Movies 2016 - Hallmark Walk of Fame 2016 - Duration: 1:22:50.

-------------------------------------------

Love FouseyTube?

For more infomation >> Love FouseyTube?

-------------------------------------------

For more infomation >> Love FouseyTube?

-------------------------------------------

Best Reviewed Mattress

For more infomation >> Best Reviewed Mattress

-------------------------------------------

For more infomation >> Best Reviewed Mattress

-------------------------------------------

/YTP\ - Le Père Noël n'a pas vraiment de message à vous faire passer car il raconte n'importe quoi ! - Duration: 1:49.

For more infomation >> /YTP\ - Le Père Noël n'a pas vraiment de message à vous faire passer car il raconte n'importe quoi ! - Duration: 1:49.

-------------------------------------------

For more infomation >> /YTP\ - Le Père Noël n'a pas vraiment de message à vous faire passer car il raconte n'importe quoi ! - Duration: 1:49.

-------------------------------------------

Home Remedies For Acne | Remove Acne Marks (100% Works) With Results | Get Glowing Skin. - Duration: 7:20.

I hope you find" Home Remedies For Acne" helpful ! Don't forget to Hit the Subscribe and thumbs up button :)-

For more infomation >> Home Remedies For Acne | Remove Acne Marks (100% Works) With Results | Get Glowing Skin. - Duration: 7:20.

-------------------------------------------

For more infomation >> Home Remedies For Acne | Remove Acne Marks (100% Works) With Results | Get Glowing Skin. - Duration: 7:20.

-------------------------------------------

6 Most Bad-Ass Weapons in the Animal Kingdom - Duration: 9:51.

What's the most badass thing you've ever seen a man do?

Crack a cinder block with his fist?

Catch a crossbow bolt with his bare hands?

Chew bubble gum with his ass cheeks?

*? ? ?* Well take that shit and multiply it by about a thousand, and you'll have the kind

of things that other species do in their everyday routine.

These are the 6 most bad-ass weapons in the animal kingdom, We're talking about creatures

like_ (6)The Mantis Shrimp's Fists of Death

The mantis shrimp lays claim to owning the fastest and tastiest arms of the water bound

kingdom.

If Chuck Norris lived under water, he would drown and die.

And a mantis shrimp would punch a hole in his carcass.

hahaha, those gardening gloves?

Those tiny boxing gloves aren't for gardening, because The speed of the mantis shrimp's punch

is delivered at 50 mph.

Keep in mind the shrimp is doing this in water.

If you've ever stupidly wrestled with friends at the beach, you realize how your devastating

roundhouse winds up moving in slow motion as you slosh through the surf.

I mean, Think how strong you'd have to be to punch through the water as fast as a moving

vehicle.

What?

It locks those arms in place allowing energy to build up in the muscles.

For an added "fuck you" there's an organic spring mechanism in the joint that adds extra

shit'n force!!

... damn

So when the local shrimp from Cobra Kai start shit, the mantis shrimp unleashes the force

of the muscle which, when combined with the added extra shit'n force- ya that whole

shpiel, means the weapon is released at an acceleration which can reach 10,000 times

the force of gravity.

That's kind of like being punched by Mike Tyson in his prime, if his outstretched arm

was attached to a meteor as it entered the atmosphere.

In captivity, the shrimp have been known to punch through aquarium glass, totally fucking

up people's rugs.

In fact, the punch of the mantis shrimp is so fast, it actually lowers the pressure of

the water in its path which--conveniently for a badass sea-ninja who fancies

some pre-cooked crab--boils the water around the punch.

Steven Seagal's probably done that once or twice at best.

Coming down to (5)The Trap-Jaw Ant's...(blank screen)um, Trap.

Jaw.

The trap-jaw ant is the proud owner of the fastest moving predatory appendage in the

animal kingdom.

Can you guess what it is? no-one?

It's the fucking trap-jaw ant.

That smaller insect will soon regret taking a closer look at the ant's sweet handlebar

"mustache".

The trap-jaw ant has two mandibles attached to the front of its head which are held open

at 180 degrees, making it look a bit like a surprised Southern gentleman.

If the fine hairs lining the mandibles are touched, the mechanism is triggered and the

jaws close at speeds of up to 140 mph.

That's 2,300 times quicker than you can blink your freaking eye and more threatening than

that puny piranha.

... that's adorable The speed of their jaw is not only useful

for catching food.

It also facilitates one of the most incredible evasive maneuvers, or party tricks, in nature.

In a tight spot the ant can bite at

the ground and use it to jump incredible distances, the human equivalent of which would be the

ability to snap into a Slim Jim with such ferocity it rocketed you over a four-story

building.

I miss that guy.

Ok, coming into (4)- oh my GOD!!

The Giant Amazonian Centipede's Ninja Skills Any time "giant" and "centipede" end up in

the same sentence, sadly i'm not talking about the Atari games, it's probably a bad

scene.

And at over a foot long, the extremely venomous giant amazonian centipede certainly qualifies.

Ya'll are afraid of spiders you say?

No one told me about this scrawny-ass Ninja!!

Like any centipede this one is earth bound.

But rather than sticking to an easily attainable centipede diet of insects and the occasional

cast member from the film Willow, this species has instead refined the art of catching bats

in flight.

Yes you read right: it catches fucking bats in flight.

Shit.

By climbing the walls of bat-caves, the centipede is capable of suspending its body from an

overhang and holding itself there, waiting for its unsuspecting prey to pass by.

...

(breathes) now enjoy this monstrosity From this seemingly prone position, they've been

seen snatching bats nearly twice their own size.

however, To fully appreciate how awesome that is, look at the next fat dude who passes you

at CostCo.

Imagine trying to hang from your feet and catch him.

Now imagine he's flying and you have to hold him there for two hours until you're done

eating him.

The giant amazonian centipede has 42 murderous legs, but it only uses ten of these to keep

hold while it dangles, catches and eats.

So to further enhance the captive flying fat guy scenario, imagine doing the whole thing

while hanging from the ceiling with only two toes.

Remember that shrimp from earlier?

Well here's his best friend (3) "Pistol Shrimp's Laser Claw"

Do not be deceived by the size of this cute little creature--that lumpy shape by the pistol

shrimp's head is its Laser Claw!!

It's specially modified to blow the shit out of its opponent by snapping shut so quickly

it produces a flash of light and a blast of sound reaching 218 decibels, science says

is louder than a damned gunshot.

Hold on!!

Don't go sciencing yet.

The sound isn't caused by the claws snapping together, but rather a jet of water which

is shot at 60 mph.

Due to the, um, "underwateriness", a low pressure bubble is formed and the sound is created

when the bubble collapses.

And the sound is so powerful it stuns the opponent into a somewhat retarded stupor,

leaving Mr. Pistol to reap the rewards and tuck Into a lovely comatose crutesan, crushawn,

crustacean.

mother-fucking-hel- into a lovely comatose crustacean snack.

in other words, a mixed flash bang thrown by chuck norris is how it feels... don't

ask how I got there Wait, it gets weirder.

The sheer force of the bubble collapse means it reaches temperatures up to 18,000 degrees

Fahrenheit , a.k.a. hotter than the surface of the fucking sun.

So In theory this means if you could train a bunch of these shrimp to shoot at each other

they could cook and prepare themselves as a meal.

... #whoWantsSushi Getting closer as we go.

(2)Meet the palm salamander and his 18,000 watt Tongue!!, who science has awarded with

the title of "owner of the fastest muscle in the world."

While probably one or two Guido salamanders go around bragging about which muscle that

is, it's actually a reference to its tongue.

It's possible the lady salamanders are still impressed by that, that's a bit disturbing

so we'll ignore that.

The palm salamander can fully extend its tongue which is about half the length of its 18-centimeter

body in about seven milliseconds.

That works out to about 29 mph, which might not sound all that impressive until you watch

this awesomely amazing hunt.

It's like a freaking magic trick.

One moment the insect is chilling on the wall across the room, and then suddenly it's not

and for some reason the salamander is lazily chewing on something.

If the human tongue moved that fast, every middle school dance would be a blood bath

of French kissing fatalities.

Too late I can't take that back, have fun with the image of the next girl you see electrocuted

to the crisp of Scorpions Call The strongest muscle in the human body (the

quadriceps) can put out about 100 watts of power.

Compare the Salamanders 18,000 watts Toungue, and your thighs are a weak-ass generator barely

powering a light bulb while our amphibious friend would be running two

five-ton air conditioning units.

Your thighs officially suck. and mine too.

Likely you're already aware that jellyfish can fuck you up mightily by the simple act

of you having the audacity to occupy the same space as their godforsaken appendages, and

it has a name...

(1) The Jellyfish's Supersonic Stingers . This is caused by thousands of stinger cells concentrated

on each of their tentacles.

The box jellyfish has up to 60 tentacles reaching seven-feet in length.

Every inch of those tentacles has over two million stinging cells full of venom, which

is why so many people shit their bikini bottoms when they turn up at the local beach.

I'm going to die.

This isn't the result of the jellyfish being a dick, though.

It doesn't sting you for wearing that preposterous Speedo out in public, it doesn't even have

a brain.

The sting is a natural reaction which is so badass it's un-fucking-controllable.

Science is about to explain how it works.

Within each of the stinger cells is a harpoon style weapon, designed to deliver maximum

venom on contact.

That's contact with anything that brushes by it in the ocean, be it a fish, a school

of used condoms, or you.

When the trigger of the stinger cell--which science people in wetsuits call a nematocyst--is

fired, the harpoon is discharged in 700 nanoseconds.

In slightly easier to comprehend language that's 0.0000007 seconds.

Or, in other words, holy shit that's quick.

Nobody Fucks with this Ultimate Mindless Hell Spawn.

The nematocyst cell fires the harpoon at such a high speed, the force of the acceleration

equals 1,000,000 times the force of gravity.

An astronaut will typically encounter four to five Gs during takeoff, which means if

you put a jellyfish in the space shuttle, and it fired its stingers at the moment of

takeoff, it would travel back in time.

Your welcome, with a side of Mind Fuck.

Now if you'll excuse me as I thank you all for watching this bad-assery and subscribing

while you're at it, big thank you from this channel as you do that, I'm gonna crap out

the mind fuck I just went through.

For more infomation >> 6 Most Bad-Ass Weapons in the Animal Kingdom - Duration: 9:51.

-------------------------------------------

For more infomation >> 6 Most Bad-Ass Weapons in the Animal Kingdom - Duration: 9:51.

-------------------------------------------

Knock Knock - Santa calling.

For more infomation >> Knock Knock - Santa calling.

-------------------------------------------

Love Lele Pons?

For more infomation >> Love Lele Pons?

-------------------------------------------

Hallmark Chistmas Movie 2016 - Christmas for a Dollar 2016 - Hallmark Romantic Movie - Duration: 1:22:33.

For more infomation >> Hallmark Chistmas Movie 2016 - Christmas for a Dollar 2016 - Hallmark Romantic Movie - Duration: 1:22:33.

-------------------------------------------

Dance Moms - TBT: ¡FELIZ NAVIDAD! - Duration: 1:56.

For more infomation >> Dance Moms - TBT: ¡FELIZ NAVIDAD! - Duration: 1:56.

-------------------------------------------

Custom Remix 2 ~ Nhato - Magic - Duration: 5:58.

You thought it was over?

And no !

We are still at half!

For more infomation >> Custom Remix 2 ~ Nhato - Magic - Duration: 5:58.

-------------------------------------------

La magie de Noël - Duration: 2:53.

For more infomation >> La magie de Noël - Duration: 2:53.

-------------------------------------------

6 Most Bad-Ass Weapons in the Animal Kingdom - Duration: 9:51.

What's the most badass thing you've ever seen a man do?

Crack a cinder block with his fist?

Catch a crossbow bolt with his bare hands?

Chew bubble gum with his ass cheeks?

*? ? ?* Well take that shit and multiply it by about a thousand, and you'll have the kind

of things that other species do in their everyday routine.

These are the 6 most bad-ass weapons in the animal kingdom, We're talking about creatures

like_ (6)The Mantis Shrimp's Fists of Death

The mantis shrimp lays claim to owning the fastest and tastiest arms of the water bound

kingdom.

If Chuck Norris lived under water, he would drown and die.

And a mantis shrimp would punch a hole in his carcass.

hahaha, those gardening gloves?

Those tiny boxing gloves aren't for gardening, because The speed of the mantis shrimp's punch

is delivered at 50 mph.

Keep in mind the shrimp is doing this in water.

If you've ever stupidly wrestled with friends at the beach, you realize how your devastating

roundhouse winds up moving in slow motion as you slosh through the surf.

I mean, Think how strong you'd have to be to punch through the water as fast as a moving

vehicle.

What?

It locks those arms in place allowing energy to build up in the muscles.

For an added "fuck you" there's an organic spring mechanism in the joint that adds extra

shit'n force!!

... damn

So when the local shrimp from Cobra Kai start shit, the mantis shrimp unleashes the force

of the muscle which, when combined with the added extra shit'n force- ya that whole

shpiel, means the weapon is released at an acceleration which can reach 10,000 times

the force of gravity.

That's kind of like being punched by Mike Tyson in his prime, if his outstretched arm

was attached to a meteor as it entered the atmosphere.

In captivity, the shrimp have been known to punch through aquarium glass, totally fucking

up people's rugs.

In fact, the punch of the mantis shrimp is so fast, it actually lowers the pressure of

the water in its path which--conveniently for a badass sea-ninja who fancies

some pre-cooked crab--boils the water around the punch.

Steven Seagal's probably done that once or twice at best.

Coming down to (5)The Trap-Jaw Ant's...(blank screen)um, Trap.

Jaw.

The trap-jaw ant is the proud owner of the fastest moving predatory appendage in the

animal kingdom.

Can you guess what it is? no-one?

It's the fucking trap-jaw ant.

That smaller insect will soon regret taking a closer look at the ant's sweet handlebar

"mustache".

The trap-jaw ant has two mandibles attached to the front of its head which are held open

at 180 degrees, making it look a bit like a surprised Southern gentleman.

If the fine hairs lining the mandibles are touched, the mechanism is triggered and the

jaws close at speeds of up to 140 mph.

That's 2,300 times quicker than you can blink your freaking eye and more threatening than

that puny piranha.

... that's adorable The speed of their jaw is not only useful

for catching food.

It also facilitates one of the most incredible evasive maneuvers, or party tricks, in nature.

In a tight spot the ant can bite at

the ground and use it to jump incredible distances, the human equivalent of which would be the

ability to snap into a Slim Jim with such ferocity it rocketed you over a four-story

building.

I miss that guy.

Ok, coming into (4)- oh my GOD!!

The Giant Amazonian Centipede's Ninja Skills Any time "giant" and "centipede" end up in

the same sentence, sadly i'm not talking about the Atari games, it's probably a bad

scene.

And at over a foot long, the extremely venomous giant amazonian centipede certainly qualifies.

Ya'll are afraid of spiders you say?

No one told me about this scrawny-ass Ninja!!

Like any centipede this one is earth bound.

But rather than sticking to an easily attainable centipede diet of insects and the occasional

cast member from the film Willow, this species has instead refined the art of catching bats

in flight.

Yes you read right: it catches fucking bats in flight.

Shit.

By climbing the walls of bat-caves, the centipede is capable of suspending its body from an

overhang and holding itself there, waiting for its unsuspecting prey to pass by.

...

(breathes) now enjoy this monstrosity From this seemingly prone position, they've been

seen snatching bats nearly twice their own size.

however, To fully appreciate how awesome that is, look at the next fat dude who passes you

at CostCo.

Imagine trying to hang from your feet and catch him.

Now imagine he's flying and you have to hold him there for two hours until you're done

eating him.

The giant amazonian centipede has 42 murderous legs, but it only uses ten of these to keep

hold while it dangles, catches and eats.

So to further enhance the captive flying fat guy scenario, imagine doing the whole thing

while hanging from the ceiling with only two toes.

Remember that shrimp from earlier?

Well here's his best friend (3) "Pistol Shrimp's Laser Claw"

Do not be deceived by the size of this cute little creature--that lumpy shape by the pistol

shrimp's head is its Laser Claw!!

It's specially modified to blow the shit out of its opponent by snapping shut so quickly

it produces a flash of light and a blast of sound reaching 218 decibels, science says

is louder than a damned gunshot.

Hold on!!

Don't go sciencing yet.

The sound isn't caused by the claws snapping together, but rather a jet of water which

is shot at 60 mph.

Due to the, um, "underwateriness", a low pressure bubble is formed and the sound is created

when the bubble collapses.

And the sound is so powerful it stuns the opponent into a somewhat retarded stupor,

leaving Mr. Pistol to reap the rewards and tuck Into a lovely comatose crutesan, crushawn,

crustacean.

mother-fucking-hel- into a lovely comatose crustacean snack.

in other words, a mixed flash bang thrown by chuck norris is how it feels... don't

ask how I got there Wait, it gets weirder.

The sheer force of the bubble collapse means it reaches temperatures up to 18,000 degrees

Fahrenheit , a.k.a. hotter than the surface of the fucking sun.

So In theory this means if you could train a bunch of these shrimp to shoot at each other

they could cook and prepare themselves as a meal.

... #whoWantsSushi Getting closer as we go.

(2)Meet the palm salamander and his 18,000 watt Tongue!!, who science has awarded with

the title of "owner of the fastest muscle in the world."

While probably one or two Guido salamanders go around bragging about which muscle that

is, it's actually a reference to its tongue.

It's possible the lady salamanders are still impressed by that, that's a bit disturbing

so we'll ignore that.

The palm salamander can fully extend its tongue which is about half the length of its 18-centimeter

body in about seven milliseconds.

That works out to about 29 mph, which might not sound all that impressive until you watch

this awesomely amazing hunt.

It's like a freaking magic trick.

One moment the insect is chilling on the wall across the room, and then suddenly it's not

and for some reason the salamander is lazily chewing on something.

If the human tongue moved that fast, every middle school dance would be a blood bath

of French kissing fatalities.

Too late I can't take that back, have fun with the image of the next girl you see electrocuted

to the crisp of Scorpions Call The strongest muscle in the human body (the

quadriceps) can put out about 100 watts of power.

Compare the Salamanders 18,000 watts Toungue, and your thighs are a weak-ass generator barely

powering a light bulb while our amphibious friend would be running two

five-ton air conditioning units.

Your thighs officially suck. and mine too.

Likely you're already aware that jellyfish can fuck you up mightily by the simple act

of you having the audacity to occupy the same space as their godforsaken appendages, and

it has a name...

(1) The Jellyfish's Supersonic Stingers . This is caused by thousands of stinger cells concentrated

on each of their tentacles.

The box jellyfish has up to 60 tentacles reaching seven-feet in length.

Every inch of those tentacles has over two million stinging cells full of venom, which

is why so many people shit their bikini bottoms when they turn up at the local beach.

I'm going to die.

This isn't the result of the jellyfish being a dick, though.

It doesn't sting you for wearing that preposterous Speedo out in public, it doesn't even have

a brain.

The sting is a natural reaction which is so badass it's un-fucking-controllable.

Science is about to explain how it works.

Within each of the stinger cells is a harpoon style weapon, designed to deliver maximum

venom on contact.

That's contact with anything that brushes by it in the ocean, be it a fish, a school

of used condoms, or you.

When the trigger of the stinger cell--which science people in wetsuits call a nematocyst--is

fired, the harpoon is discharged in 700 nanoseconds.

In slightly easier to comprehend language that's 0.0000007 seconds.

Or, in other words, holy shit that's quick.

Nobody Fucks with this Ultimate Mindless Hell Spawn.

The nematocyst cell fires the harpoon at such a high speed, the force of the acceleration

equals 1,000,000 times the force of gravity.

An astronaut will typically encounter four to five Gs during takeoff, which means if

you put a jellyfish in the space shuttle, and it fired its stingers at the moment of

takeoff, it would travel back in time.

Your welcome, with a side of Mind Fuck.

Now if you'll excuse me as I thank you all for watching this bad-assery and subscribing

while you're at it, big thank you from this channel as you do that, I'm gonna crap out

the mind fuck I just went through.